Instruction/ maintenance manual of the product 2518X01 Lenovo
Go to page of 203
ThinkP ad T410 and T410i Har dwar e Maint enance Manual.
.
ThinkP ad T410 and T410i Har dwar e Maint enance Manual.
Note: Before using this information and the pr oduct it supports, be sur e to read the gener al information under Appendix A “Notices” on page 191.
Contents About this manual . . . . . . . . . . . . v Chapter 1. Safety information . . . . . 1 General safety . . . . . . . . . . . . . . . . 2 Electrical safety . . . . . . . . . . . . . . . 3 Safety inspection guide . . . . . . . . . . . . 5 Handling devices that ar e sensitive t o electr ostatic discharge .
1160 L CD unit . . . . . . . . . . . . . . . 114 1170 F an assembly . . . . . . . . . . . . . 119 1180 CPU . . . . . . . . . . . . . . . . 122 1190 Base cover assembly, I/O sub card, and I/O sub card cable . . . . . . . . . . . . . . . 123 1200 Magnesium structure fr ame .
About this manual This manual contains service and r eference information for the following ThinkP ad® pr oducts. ThinkPad T410 and T410i MT 2516, 2518, 2519, 2522, 2537, 2538, and 2539 Use this manual along with the advanced diagnostic tests to troubleshoot pr oblems.
vi ThinkPad T410 and T410i Hardwar e Maintenance Manual.
Chapter 1. Safety information This chapter presents following safety information that you need to be familiar with befor e you service a ThinkPad Notebook.
General safety F ollow these rules to ensure gener al safety: • Observe good housekeeping in the area of the machines during and aft er maint enance. • When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet.
Electrical safety Observe the following rules when working on electrical equipment. Important: Use only approved tools and t est equipment. Some hand t ools have handles covered with a soft material that does not insulat e you when working with live electrical curr ents.
– Use caution; do not become a victim yourself. – Switch off power . – Send another person to get medical aid. 4 ThinkP ad T410 and T410i Hardwar e Maintenance Manual.
Safety inspection guide The purpose of this inspection guide is to assist you in identifying pot entially unsafe conditions. As each machine was designed and built, requir ed safety items wer e installed to pr otect users and service technicians from injury .
Handling devices that ar e sensitive to electr ostatic discharge Any computer part containing transist ors or integr ated cir cuits (ICs) should be consider ed sensitive to electrostatic dischar ge (ESD .) ESD damage can occur when there is a difference in char ge between objects.
Safety notices (multilingual translations) The safety notices in this section ar e pr ovided in the following languages: • English • Arabic • Brazilian P ortuguese • F rench • German • Hebrew • Japanese • Kor ean • Spanish • T raditional Chinese Chapter 1 .
DANGER Before the computer is powered on after FRU r eplacement, make sure all screws, springs, and other small parts are in place and ar e not left loose inside the computer . Verify this by shaking the computer and listening for r attling sounds. Metallic parts or metal ak es can cause electrical shorts.
DANGER T o avoid shock, do not remove the plastic cover that pr otects the lower part of the inverter card. DANGER Though the main batteries have low voltage, a shorted or grounded battery can produce enough current to burn personnel or combustible materials.
10 ThinkP ad T410 and T410i Har dware Maintenance Manual.
Chapter 1 . Safety information 11.
PERIGO Antes de ligar o computador após a substituição da FRU, certique-se de que todos os parafusos, molas e outras peças pequenas estejam no lugar e não estejam solt os dentro do computador . V erique isso sacudindo o computador e procurando ouvir sons de peças soltas.
PERIGO Par a evitar choque elétrico, não remova a capa plástica que protege a parte inferior da placa inversor a. PERIGO Embora as principais baterias possuam baixa voltagem, uma bateria em curto-circuito ou aterr ada pode produzir corr ente o bastante par a queimar mat eriais de pessoal ou inamáveis.
DANGER A vant de remettre l'ordinat eur sous tension après remplacement d'une unité en clientèle, vériez que tous les ressorts, vis et autres pièces sont bien en place et bien xées. Pour ce faire, secoue z l'unité et assurez-vous qu'aucun bruit suspect ne se produit.
DANGER An d'éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d'alimentation.
VORSICHT Bevor nach einem FRU-Austausch der Computer wieder angeschlossen wird, muß sichergestellt werden, daß keine Schrauben, F edern oder andere Kleinteile fehlen oder im Gehäuse vergessen wurden. Der Computer muß geschüttelt und auf Klapper geräusche geprüft werden.
VORSICHT Die Leuchtstoffröhr e im L CD-Bildschirm enthält Quecksilber . Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Der L CD-Bildschirm besteht aus Glas und kann z erbrechen, wenn er unsachgemäß behandelt wird oder der Computer auf den Boden fällt.
18 ThinkP ad T410 and T410i Har dware Maintenance Manual.
Chapter 1 . Safety information 19.
20 ThinkP ad T410 and T410i Har dware Maintenance Manual.
Chapter 1 . Safety information 21.
22 ThinkP ad T410 and T410i Har dware Maintenance Manual.
Chapter 1 . Safety information 23.
PELIGRO Antes de encender el sistema despues de sustituir una FRU, compruebe que todos los tornillos, muelles y demás pie zas pequeñas se encuentran en su sitio y no se encuentran sueltas dentro del sistema. Compruébelo agitando el sistema y escuchando los posibles ruidos que provocarían.
PELIGRO Par a evitar descargas, no quite la cubierta de plástico que rodea la parte baja de la tarjeta invertida. PELIGRO Aunque las bat erías principales tienen un voltaje bajo, una batería cortoc.
26 ThinkP ad T410 and T410i Har dware Maintenance Manual.
Chapter 1 . Safety information 27.
Laser compliance statement (multilingual translations) The laser compliance stat ements in this section are provided in the following languages: • English • Arabic • Brazilian P ortuguese • F .
Chapter 1 . Safety information 29.
Alguns modelos de computador ThinkP ad são equipados na fábrica com um dispositivo de armazenament o ótico, como uma unidade de CD-ROM ou de DVD-ROM.
Certains modèles d'ordinat eur ThinkPad sont équipés d'origine d'une unit é de stockage optique t elle qu'une unité de CD-ROM ou de DVD-ROM.
Einige ThinkP ad-Modelle sind werkseitig mit einem CD-ROM- oder DVD-ROM-Laufwerk ausgestattet. CD- und DVD-Laufwerke können auch gesondert als Zusatz einrichtung erworben werden.
Chapter 1 . Safety information 33.
34 ThinkP ad T410 and T410i Har dware Maintenance Manual.
Chapter 1 . Safety information 35.
Algunos modelos de sistemas ThinkP ad están equipados de fábrica con un dispositivo de almacenamient o óptico, como una unidad de CD-ROM o de DVD-ROM.
Chapter 1 . Safety information 37.
38 ThinkP ad T410 and T410i Har dware Maintenance Manual.
Chapter 2. Important service information This chapter pr esents following important service information that applies to all machine types supported by this manual: • “Str ategy for r eplacing FRUs.
Attention: The setup congur ation on the computer you are servicing may have been cust omized. Running Automatic Congur ation may alter the settings. Not e the curr ent congur ation settings (using the View Conguration option); then, when service has been completed, verify that those settings remain in effect.
Strat egy for r eplacing FRUs for C T O , CMV , and GA V Pr oduct denition Dynamic Congure T o Order (C T O) This provides the ability for a customer to congure an IBM® or a Lenovo solution fr om an eSit e, and have this congur ation sent to fulllment, where it is built and shipped directly to the customer .
• Authorized IBM Business P artners can access Eclaim at the following W eb site: https://wca.eclaim.com Using eSupport F or Key Commodities (Examples - hard disk drive, system board, micropr ocesso.
Chapter 3. General check out This chapter pr esents following information: • “What to do rst” on page 44 • “Checkout guide” on page 45 – “Diagnostics using PC-Doctor for DOS” on p.
What to do rst When you do r eturn a FRU, you must include the following information in the parts ex change form or parts return form that you attach to it: 1. Name and phone number of service technician 2. Date of service 3. Date on which the machine failed 4.
Checkout guide Use the following pr ocedures as a guide in identifying and corr ecting pr oblems with the ThinkP ad Notebook. Note: The diagnostic tests ar e int ended to test only ThinkP ad pr oducts. The use of non- ThinkP ad products, prot otype car ds, or modied options can lead t o false indications of errors and invalid system responses.
6. Press cursor keys t o select A T API CDx (x: 0, 1, ...) and then press Enter . 7. F ollow the instructions on the screen. 8. The main panel of PC-Doctor appears. 9. Select Diagnostics with the arrow k eys, and press Enter . Note: Y ou can select an item not only with the arrow keys, but also with the T r ackP oint® pointer .
Detecting system information with PC-Doctor PC-Doctor can detect the following system information: Hardware Info • System Conguration • Memory Contents • Physical Disk Drives • Logical Disk.
F ollow the instructions on the scr een. Lenovo ThinkV antage T oolbo x (Lenovo System T oolbo x) also has problem determination aids that determine software and usage problems. F or additional information about this progr am, see the Help for the pr ogram.
FRU tests The following table shows the test for each FRU . T able 1. FRU tests FRU Applicable t est System boar d 1. Diagnostics ➙ CPU/Coprocessor 2. Diagnostics ➙ Systemboard 3. If the docking station or the port r eplicator is attached t o the ThinkP ad Not ebook, detach it.
T able 1. FRU t ests (continued) FRU Applicable t est T r ackP oint or pointing device If the T r ackP oint does not work, check the congur ation as specied in the BIOS Setup Utility . If the T r ackP oint is disabled, select Automatic t o enable it.
P ower system check out T o verify a symptom, do the following: 1. T urn off the computer . 2. Remove the batt ery pack. 3. Connect the ac adapter . 4. Check that power is supplied when you turn on the comput er . 5. T urn off the computer . 6. Disconnect the ac adapter and install the charged battery pack.
P erform oper ational char ging. If the battery status indicator or icon does not turn on, r emove the battery pack and let it r eturn to room temper ature. Reinstall the batt ery pack. If the char ge indicator or icon still does not turn on, replace the battery pack.
Wire V oltage (V dc) Red +2.5 t o +3.2 Black Ground Red(+) Black(-) • If the voltage is correct, r eplace the system boar d. • If the voltage is not corr ect, replace the backup battery . • If the backup battery dischar ges quickly after r eplacement, r eplace the system boar d.
54 ThinkP ad T410 and T410i Har dware Maintenance Manual.
Chapter 4. Related service information This chapter pr esents following information: • “Restoring the fact ory contents by using Recovery Disc Set” on page 55 • “P asswords” on page 56 •.
3. Press F10 to save the Setup Utility congur ation changes. F ollow the instructions on the scr een to begin the recovery process. 4. Select your language and click Next . 5. Read the license. If you agr ee with the terms and conditions, select I accept these terms and conditions and then click Ne xt .
service t echnicians provide any services to reset either the user or the master HDP , or to recover data fr om the har d disk drive. The har d disk drive can be replaced for a scheduled fee. F or how to remove the POP , see “How to remove the hard-disk passwor d” on page 57.
2. When the ThinkPad logo comes up, immediately pr ess F1 to enter BIOS Setup Utility .F or models supporting the P assphrase function, pr ess F1 while HDP icon is appearing on the screen; then ent er the master HDP . F or the other models, enter the master HDP .
P ower management T o r educe power consumption, the computer has thr ee power management modes: scr een blank, sleep (standby in Windows XP), and hibernation. Screen blank mode If the time set on the “T urn off monit or ” timer in the oper ating system e xpires, the L CD backlight turns off.
Hibernation mode In hibernation mode, the following occurs: • The syst em status, RAM, VRAM, and setup data are stor ed on the hard disk. • The system is powered off. Note: If the comput er enters the hibernation mode while it is dock ed to the docking station, do not undock it before r esuming normal operation.
Symptom-to-FRU inde x This section contains following information: • “Numeric error codes” on page 61 • “Error messages” on page 66 • “Beep symptoms” on page 67 • “No-beep sympto.
T able 2. Numeric error codes (continued) Symptom or error FRU or action, in sequence 0188 Invalid RFID Serialization Information Area. System board. 0189 Invalid RFID conguration information area—The EEPROM checksum is not corr ect. System board.
T able 2. Numeric error codes (continued) Symptom or error FRU or action, in sequence 021x Keyboar d err or . Run interactive tests of the keyboar d and the auxiliary input device. 0220 Monitor type error—Monit or type does not match the one specied in CMOS.
T able 2. Numeric error codes (continued) Symptom or error FRU or action, in sequence 02F6 Software NMI failed 1. DIMM. 2. System board. 02F7 F ail-safe timer NMI failed 1. DIMM. 2. System board. 1801 Attached docking station is not supported Shut down the comput er and r emove it from the docking station.
T able 2. Numeric error codes (continued) Symptom or error FRU or action, in sequence 2010 Warning: Y our internal har d disk drive (HDD) may not function corr ectly on this syst em. Ensur e that your HDD is support ed on this syst em and that the lat est HDD rmware is installed.
Error messages T able 3. Error messages Symptom or error FRU or action, in sequence Device address conict. 1. Load “Setup Defaults” in the BIOS Setup Utility . 2. Backup battery . 3. System board. Allocation error for device. 1. Load “Setup Defaults” in the BIOS Setup Utility .
Beep symptoms T able 4. Beep symptoms Symptom or error FRU or action, in sequence One beep and a blank, unreadable, or ashing L CD. 1. Reseat the L CD connector . 2. L CD assembly . 3. External CRT . 4. System board. One long and two short beeps, and a blank or unreadable L CD.
L CD-r elated symptoms Important: The TFT L CD for the notebook computer contains many thin-lm tr ansistors (TFT s). The pr esence of a small number of dots that are missing, discolored, or always lighted is char acteristic of TFT L CD technology, but ex cessive pixel pr oblems can cause viewing concerns.
Intermittent problems Intermittent system hang pr oblems can be due to a variety of causes that have nothing to do with a hardwar e defect, such as cosmic r adiation, electr ostatic dischar ge, or software err ors. FRU r eplacement should be considered only when a pr oblem recurs.
70 ThinkP ad T410 and T410i Har dware Maintenance Manual.
Chapter 5. Status indicators This chapter presents the system status indicators that show the status of the computer . 7 1 2 3 456 8 9 © Copyright L enovo 2010 71.
11 10 T able 7. S tatus indicators Indicator Meaning 1 Speaker mute Orange: The speaker is on mute. T o set the speakers on mute or unmute, press the speak er mut e button. 2 Microphone mut e Orange: The micr ophone is on mute. None of the recor ding devices is available while the microphone mute is on by default.
T able 7. Status indicators (continued) Indicator Meaning 5 Device access Green: Data is being r ead from or writt en to the har d disk drive, the diskette drive, or the drive in the Serial Ultrabay Slim device. When this indicat or is on, do not put the computer int o sleep (standby) mode or turn off the computer .
T able 7. Status indicators (continued) Indicator Meaning 10 Battery status Green: The battery has more than 20% charge. Orange: The batt ery has between 5% and 20% char ge. F ast blinking or ange: The battery has less than 5% charge. Note: The battery may be char ging.
Chapter 6. Fn key combinations The following table shows the function of each combination of Fn with a function k ey . T able 8. Fn key combinations Key combination Description Fn+F1 Reserved.
T able 8. Fn key combinations (continued) Key combination Description Fn+F7 Apply a pr esentation scheme dir ectly, with no need to start P resentation Direct or . T o disable this function and use the Fn+F7 key combination for switching a display output location, start P resentation Dir ector , and change the settings.
T able 8. Fn key combinations (continued) Key combination Description Fn+PgUp T urn the ThinkLight® on or off. Note: This function is supported only on the ThinkPad Notebooks that have the ThinkLight. The on or off status of the ThinkLight is shown on the screen for a few seconds when you press Fn+PgUp.
78 ThinkP ad T410 and T410i Har dware Maintenance Manual.
Chapter 7. FRU replacement notices This chapt er pr esents notices relat ed to r emoving and replacing parts. Read this chapter carefully before replacing any FRU.
Retaining serial numbers This section includes the following descriptions: • “Rest oring the serial number of the system unit” on page 80 • “Retaining the UUID” on page 80 • “Reading o.
designed t o provide unique IDs until the year A.D . 3400. No two comput ers in the world have the same number . When you replace the system boar d, you must set the UUID on the new syst em boar d as follows: 1. Install the LENOV O ThinkP ad Hardwar e Maintenance Diskette V ersion 1.
82 ThinkP ad T410 and T410i Har dware Maintenance Manual.
Chapter 8. Removing and replacing a FRU This chapter pr esents dir ections and drawings for use in r emoving and replacing a FRU . Be sur e to observe the following general rules: 1. Do not try to service any comput er unless you have been trained and certied.
Before servicing ThinkP ad T410 and T410i Some models of the ThinkP ad T410 and T410i you ar e servicing might have the SIM card that the cust omer has installed. If the computer you are servicing has the SIM card, remove it before you start the servicing.
1010 Battery pack Important notice for replacing a battery pack: ThinkV antage T oolbo x (in Windows 7) and L enovo System T oolbo x (in Windows Vista and Windows XP) have an automatic battery diagnostic that determines if the batt ery pack is defective.
1020 ExpressC ard blank bezel T able 10. Removal steps of ExpressCard blank bezel When you pr ess the ExpressC ard blank bez el 1 , it pops out 2 . 1 2 When installing: Make sure that the bez el is correctly oriented as shown in this gure.
1030 Serial Ultr abay Slim device or tr avel bez el F or access, remove this FRU: • “1010 Battery pack” on page 85 T able 11. Removal steps of Serial Ultr abay Slim device or travel bezel Holdin.
1040 Har d disk drive (HDD) slot cover , HDD rubber rails and HDD or stor age converter and solid stat e drive (SSD) F or access, remove this FRU: • “1010 Battery pack” on page 85 Attention: • Do not dr op the drive or apply any physical shock t o it.
T able 12. Removal steps of HDD slot cover , HDD rubber rails and HDD or storage converter and solid state drive (SSD) (continued) 3 F or HDD and HDD rubber rails: 4 4 F or SSD and stor age converter: 5 4 When installing: Make sure that the SSD connector or HDD connector is attached rmly .
1050 DIMM slot cover F or access, remove this FRU: • “1010 Battery pack” on page 85 T able 13. Removal st eps of DIMM slot cover Note: L oosen the screw 1 , but do not r emove it.
1060 DIMM (in bott om slot) F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1050 DIMM slot cover” on page 90 Note: This product has two DIMM slots: one under the keyboard and another on the underside of the computer .
1070 PCI Expr ess Mini Car d for wireless W AN F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1050 DIMM slot cover” on page 90 T able 15.
T able 15. Removal steps of PCI Express Mini Card for wireless W AN (continued) 3 Note: Plug the red cable int o the jack labeled MAIN , and the blue cable into the jack labeled AUX on the card.
1080 Keyboar d F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1050 DIMM slot cover” on page 90 T able 16. Removal steps of keyboard 1 Step Screw (quantity) Color T or que 1 M2 × 10 mm, wafer-head, nylon-coated (1) Black 0.
T able 16. Removal st eps of k eyboard (continued) 2 Lift the keyboar d a little in the direction shown by arr ow 3 , and then detach the connector 4 .
When installing the keyboar d, do as follows: T able 17. Installation steps of keyboard 1. Attach the keyboard connector . 1 2. Attach the k eyboard so that the keyboard edges a are under the frame as shown in this gure.
T able 17. Installation steps of keyboard (continued) a a 3. T o make sur e that the fr ont edge of the keyboard is housed rmly, gently press the keys with your thumbs and try t o slide the keyboar d toward you.
T able 17. Installation steps of keyboard (continued) 4. Make sur e that fr ont edge of the keyboar d b is attached rmly . b b b 5. Secure the keyboar d by tightening the screws fr om the bott om side of the computer .
1090 DIMM (in slot under k eyboard) F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1050 DIMM slot cover” on page 90 • “1080 Keyboard” on page 94 Note: This product has two DIMM slots: one under the keyboard and another on the underside of the computer .
T able 18. Removal steps of DIMM (in slot under keyboar d) (continued) 2 2 3 When installing: Insert the notched end of the DIMM int o the sock et. P ress the DIMM rmly, and pivot it until it snaps int o the place. Make sur e that it is rmly x ed in the slot and does not move easily .
1100 Backup battery F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1050 DIMM slot cover” on page 90 • “1080 Keyboard” on page 94 T able 19. Removal steps of backup battery DANGER Use only the battery specied in the parts list for your computer .
T able 19. Removal steps of backup battery (continued) Cable r outing: Attach the backup battery and route the cable as shown in the gur e below and make sur e that the battery connector is attached rmly .
1110 PCI Expr ess Mini Car d for wireless LAN F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1050 DIMM slot cover” on page 90 • “1080 Keyboard” on page 94 T able 20.
T able 20. Removal steps of PCI Express Mini Card for wireless LAN (continued) 3 When installing: • In models with wireless LAN card that has two antenna connectors, plug the gr ay cable int o the jack mark ed MAIN or M , and the black cable int o the jack marked AUX or A on the car d.
1120 K eyboard bez el assembly, FPC cable, and Bluethooth daughter card (BDC-2.1) F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1020 Expr essCard blank bezel.
T able 21. Removal steps of keyboard bezel assembly, FPC cable, and BDC-2.1 (continued) 3 3 3 3 Step Screw (quantity) Color T or que 3 M2 × 3 mm, wafer -head, nylon-coated (4) Black 0.
T able 21. Removal steps of keyboard bezel assembly, FPC cable, and BDC-2.1 (continued) 6 7 When installing: Make sure that the connector is attached rmly .
T able 21. Removal steps of keyboard bezel assembly, FPC cable, and BDC-2.1 (continued) When installing: Make sure that the connect ors are attached rmly . 14 15 Step Screw (quantity) Color T or que 14 M2 × 3 mm, wafer-head, nylon-coat ed (1) Black 0.
1130 SmartCard or Contactless SmartCar d F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1050 DIMM slot cover” on page 90 • “1080 Keyboard” on page 94 • “1120 K eyboard bez el assembly, FPC cable, and Bluethooth daughter car d (BDC-2.
T able 22. Removal st eps of SmartCard or Contactless SmartCard (continued) 2 3 When installing: Make sure that the connector is attached rmly . T able 23. Removal steps of SmartCard dummy spacer Some models have SmartC ard dummy spacer as a miscellaneous part.
1140 Modem daughter car d (MDC) F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1050 DIMM slot cover” on page 90 • “1080 Keyboard” on page 94 • “1120 K eyboard bez el assembly, FPC cable, and Bluethooth daughter car d (BDC-2.
1150 Speaker assembly F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1050 DIMM slot cover” on page 90 • “1080 Keyboard” on page 94 • “1120 K eyboard bez el assembly, FPC cable, and Bluethooth daughter car d (BDC-2.
T able 25. Removal steps of speak er assembly (continued) 3 3 2 When installing: Attach the speaker assembly and route the cable as shown in this gure, and make sur e that the speaker connector is attached rmly .
1160 L CD unit F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1020 Expr essCard blank bezel” on page 86 • “1050 DIMM slot cover” on page 90 • “1070.
T able 26. Removal st eps of L CD unit (continued) 2 3 4 5 Step Screw (quantity) Color T or que 2 M2 × 3 mm, wafer -head, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm) 4 M2 × 3 mm, wafer -head, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm) Chapter 8 .
T able 26. Removal st eps of L CD unit (continued) 8 8 7 6 Step Screw (quantity) Color T or que 8 M2.5 × 6 mm, wafer-head, nylon-coated (2) Black 0.392 Nm (4.
T able 26. Removal st eps of L CD unit (continued) When installing: • Make sure that you attach the connectors and rout e the cables rmly, and tape up in the proper positions as shown in this gur e. • When you r oute the cables, make sure that they ar e not subjected to any t ension.
T able 26. Removal st eps of L CD unit (continued) 12 12 118 ThinkP ad T410 and T410i Har dware Maintenance Manual.
1170 F an assembly F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1020 Expr essCard blank bezel” on page 86 • “1050 DIMM slot cover” on page 90 • “.
T able 27. Removal steps of fan assembly (continued) 4 5 When installing: • Before you attach the fan assembly to the computer , apply thermal gr ease, at an amount of 0.
T able 27. Removal steps of fan assembly (continued) F or Int egrated graphics models: a • When attaching the fan assembly t o the fr ame, take care not to damage the heat sink ( a ) of the fan assembly . a a • Make sure that the fan connect or is attached rmly .
1180 CPU F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1020 Expr essCard blank bezel” on page 86 • “1050 DIMM slot cover” on page 90 • “1070 PCI E.
1190 Base cover assembly, I/O sub car d, and I/O sub card cable F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1020 Expr essCard blank bezel” on page 86 • .
T able 29. Removal st eps of base cover assembly, I/O sub card, and I/O sub card cable (continued) 4 3 3 3 5 5 Step Screw (quantity) Color T or que 3 M2 × 3 mm, wafer -head, nylon-coated (3) Black 0.181 Nm (1.85 kgfcm) When installing: Make sure that the connector is attached rmly .
T able 29. Removal st eps of base cover assembly, I/O sub card, and I/O sub card cable (continued) 8 7 6 6 a When installing: Make sure that wir eless switch is adjusted as shown in gur e a .
T able 29. Removal st eps of base cover assembly, I/O sub card, and I/O sub card cable (continued) 10 11 11 12 Step Screw (quantity) Color T or que 11 M2 × 3.5 mm, at-head, nylon-coated (2) Silver 0.181 Nm (1.85 kgfcm) 13 When installing: Make sur e that connect ors ar e rmly attached and rout e the cables as shown in this gure.
T able 29. Removal st eps of base cover assembly, I/O sub card, and I/O sub card cable (continued) Chapter 8 . Removing and replacing a FRU 127.
T able 29. Removal st eps of base cover assembly, I/O sub card, and I/O sub card cable (continued) Note: Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds.
F or the location of each label, r efer the following gure: 1 3 7 8 11 10 9 12 20 19 18 17 5 4 14 15 13 16 6 2 Chapter 8 . Removing and replacing a FRU 129.
1200 Magnesium structure fr ame F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1020 Expr essCard blank bezel” on page 86 • “1030 Serial Ultr abay Slim de.
T able 30. Removal steps of magnesium structure frame (continued) 8 7 Chapter 8 . Removing and replacing a FRU 131.
1210 System board, DC-in connector cable, and Expr essCard slot assembly F or access, remove these FRUs, in or der: • “1010 Battery pack” on page 85 • “1020 Expr essCard blank bezel” on pa.
T able 31. Removal st eps of system board, DC-in connector cable, and ExpressCard slot assembly F ollowing components soldered on the t op side of the system board ar e e xtremely sensitive. When you service the system boar d, avoid any kind of rough handling.
T able 31. Removal steps of system board, DC-in connector cable, and ExpressCard slot assembly (continued) 1 2 1 Step Screw (quantity) Color T or que 1 M2 × 10 mm, wafer-head, nylon-coated (2) Black 0.181 Nm (1.85 kgfcm) 2 M2 × 5 mm, wafer -head, nylon-coated (1) Black 0.
2010 L CD bezel assembly F or access, remove the following FRU: • “1010 Battery pack” on page 85 T able 32. Removal st eps of L CD bez el assembly 1 1 Step Screw cap Screw (quantity) Color T or que 1 M2.5 × 6 mm, wafer -head, nylon-coat ed (4) Black 0.
T able 32. Removal steps of L CD bezel assembly (continued) 2 2 2 2 2 3 2 136 ThinkP ad T410 and T410i Har dware Maintenance Manual.
2020 LED boar d F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “2010 L CD bez el assembly” on page 135 T able 33. Removal steps of LED board 1 1 3 2 Step Screw (quantity) Color T or que 1 M2 × 3.5 mm, at-head, nylon-coated (2) Silver 0.
2030 Integr ated camera F or access, remove these FRUs, in or der: • “1010 Battery pack” on page 85 • “2010 L CD bez el assembly” on page 135 T able 34. Removal steps of integr ated camera 1 2 3 Step Screw (quantity) Color T or que 1 M2 × 3.
2040 L CD panel and L CD cable F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1020 Expr essCard blank bezel” on page 86 • “1050 DIMM slot cover” on pag.
T able 35. Removal steps of L CD panel and L CD cable (continued) 6 6 7 7 6 6 Step Screw (quantity) Color T or que 6 M2 × 3 mm, wafer -head, nylon-coated (4) Black 0.181 Nm (1.85 kgfcm) When installing: When attaching the L CD panel to the cover , pr ess the left and right edges covered with metal gently with your ngers.
2050 Camer a cable F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1020 Expr essCard blank bezel” on page 86 • “1050 DIMM slot cover” on page 90 • “.
T able 36. Removal steps of camera cable (continued) Cable routing: When you install the cable, rout e the cable as shown in the gure below. 2 2 2 2 2 142 ThinkP ad T410 and T410i Har dware Mainten.
2060 Wireless LAN antenna assembly or wireless LAN/WAN antenna assembly F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1020 Expr essCard blank bezel” on page.
T able 37. Removal steps of wireless LAN antenna assembly or wireless LAN/W AN ant enna assembly (continued) 4 4 4 3 3 4 4 Step Screw (quantity) Color T or que 3 M2 × 3.
2070 Hinges and L CD rear cover assembly F or access, remove these FRUs in or der: • “1010 Battery pack” on page 85 • “1020 Expr essCard blank bezel” on page 86 • “1050 DIMM slot cover.
146 ThinkP ad T410 and T410i Har dware Maintenance Manual.
Chapter 9. Locations This chapter presents the location of ThinkP ad T410 and T410i featur es and hardwar e. F ront view 1 Integr ated camer a (for some models) 2 ThinkLight 3 Built-in microphone 4 P .
1 2 3 4 5 6 8 9 7 5 13 11 12 10 15 16 17 14 18 19 20 21 148 ThinkP ad T410 and T410i Har dware Maintenance Manual.
Rear view 1 Status indicators Note: F or the description of each indicator , see Chapt er 5 “Status indicators” on page 71 . 2 DisplayP ort 3 HDD or SSD 4 Universal serial bus (USB) connectors 5 RJ-45 (Ethernet) connector 6 External monitor connector 7 AC power connector 8 RJ-11 (modem) connector 1 2 4 5 6 7 8 3 Chapter 9 .
Bottom view 1 Battery pack 2 Battery pack latch 3 DIMM slot 4 Docking connector 5 L CD cover latch 6 Media Card Reader slot 7 Serial Ultrabay Slim lock latch 8 Serial Ultrabay Slim eject latch 1 7 8 5.
Chapter 10. Parts list This chapter contains following lists of the service parts. • “Overall” on page 152 • “L CD FRUs” on page 168 • “Keyboar d” on page 176 • “Miscellaneous pa.
Overall 152 ThinkP ad T410 and T410i Har dware Maintenance Manual.
T able 39. P arts list—Overall No. FRU (Overall) FRU no. CRU ID a - f See “Miscellaneous parts” on page 177 . 1 L CD unit (see “L CD FRUs” on page 168.
T able 39. P arts list—Overall (continued) No. FRU (Overall) FRU no. CRU ID 6 1-GB DDR3-1066 SDRAM SO-DIMM (PC3-8500) car d • 2516-CT O , AMx, ANx • 2518-CT O , DWx, D Yx, DZx, E4x, E7x, ENx, EP.
T able 39. P arts list—Overall (continued) No. FRU (Overall) FRU no. CRU ID 10 Batt ery pack, Li-ion (4 cell) 25 • 2516-CT O • 2518-CT O , CPx, CQx, CRx, CSx, CUx, CVx, CWx, CXx, C Yx, CZx, D2x,.
T able 39. P arts list—Overall (continued) No. FRU (Overall) FRU no. CRU ID 10 Batt ery pack, Li-ion (6 cell) 55+ • 2516-CT O , A2x, A3x, A4x, A5x, A6x, A7x, A8x, A9x, AAx, A Cx, ADx, AFx, A Gx, A.
T able 39. P arts list—Overall (continued) No. FRU (Overall) FRU no. CRU ID 10 Batt ery pack, Li-ion (9 cell) 55++ • 2516-CT O , ABx, AEx • 2518-CT O , C4x, C5x, EWx, F2x, F5x, F6x, FGx, FLx •.
T able 39. P arts list—Overall (continued) No. FRU (Overall) FRU no. CRU ID 16 SA T A har d disk drive, 250 GB, 5,400 rpm • 2516-CT O , A7x, ADx, AFx, AHx, AKx • 2518-CT O , C2x, CHx, CUx, CVx, .
T able 39. P arts list—Overall (continued) No. FRU (Overall) FRU no. CRU ID 16 SA T A har d disk drive, 250 GB, 7,200 rpm FDE • 2516-CT O • 2518-CT O , EWx, F2x, FGx, FLx • 2519-CT O • 2522-.
T able 39. P arts list—Overall (continued) No. FRU (Overall) FRU no. CRU ID — 1.8" - 2.5" stor age converter 42W7888 ** 16 Micr oSA T A solid stat e drive, 80 GB • 2516-CT O • 2518-C.
T able 39. P arts list—Overall (continued) No. FRU (Overall) FRU no. CRU ID 18 Syst em board assembly, integr ated gr aphics, iAMT , TPM • 2516-CT O , A2x, A6x, A7x, A8x, ADx, AFx, AGx • 2518-CT.
T able 39. P arts list—Overall (continued) No. FRU (Overall) FRU no. CRU ID 18 Syst em board assembly, discr ete gr aphics 256 MB, iAMT , non- TPM • 2516-CT O , A5x • 2518-CT O , C9x, EPx, EQx, .
T able 39. P arts list—Overall (continued) No. FRU (Overall) FRU no. CRU ID 19 CPU assembly, Intel Cor e i3-350M P rocessor (2.26 GHz) • 2516-CT O • 2518-CT O • 2519-CT O • 2522-CT O • 2537-CT O • 2538-CT O • 2539-CT O 63Y2175 N 19 CPU assembly, Intel Cor e i5-430M P rocessor (2.
T able 39. P arts list—Overall (continued) No. FRU (Overall) FRU no. CRU ID 20 Int el Centrino Advanced-N 6200 • 2516-CT O , A6x • 2518-CT O , C2x, C5x, CCx, CDx, CEx, CFx, CGx, CHx, CJx, CKx, C.
T able 39. P arts list—Overall (continued) No. FRU (Overall) FRU no. CRU ID 24 SmartCar d Reader • 2516-CT O • 2518-CT O • 2519-CT O • 2522-CT O , 2Ux, 2Vx, 30x, 3Ex, 62x, 63x, 64x • 2537-.
T able 39. P arts list—Overall (continued) No. FRU (Overall) FRU no. CRU ID 25 F an assembly, discr ete • 2516-CT O , A4x, A5x, A9x, AAx, ABx, ACx, AEx, AHx, AJx, AKx, ALx, AMx, ANx • 2518-CT O .
T able 39. P arts list—Overall (continued) No. FRU (Overall) FRU no. CRU ID 27 Bluet ooth daught er car d (BDC-2.1) • 2516-CT O , A2x, A3x, A4x, A5x, A6x, A7x, A8x, A9x, AAx, ABx, ACx, AEx, AFx, A.
L CD FRUs In ThinkP ad T410 and T410i, ther e are following types of L CDs. • 14.1-inch WXGA LED-backlight L CD (T able 40 “P arts list—14.1-inch WX GA LED-backlight L CD” on page 169 ) • 14.1-inch WX GA+ LED-backlight L CD (T able 41 “P arts list—14.
T able 40. Parts list—14.1-inch WXGA LED-backlight L CD No. FRU (14.1-inch WXGA LED-backlight L CD) FRU no. CRU ID a, b See “Miscellaneous parts” on page 177 .
T able 40. Parts list—14.1-inch WXGA LED-backlight L CD (continued) No. FRU (14.1-inch WXGA LED-backlight L CD) FRU no. CRU ID 2 L CD module, 14.1-inch WXGA LED-backlight • 2516-CT O , A2x, A3x, A.
T able 40. Parts list—14.1-inch WXGA LED-backlight L CD (continued) No. FRU (14.1-inch WXGA LED-backlight L CD) FRU no. CRU ID 4 Hinges • 2516-CT O , A2x, A3x, A4x, A5x, A6x, A7x, A8x, A9x, AAx, A.
T able 40. Parts list—14.1-inch WXGA LED-backlight L CD (continued) No. FRU (14.1-inch WXGA LED-backlight L CD) FRU no. CRU ID 9 L CD cable • 2516-CT O , A2x, A3x, A4x, A5x, A6x, A7x, A8x, A9x, AA.
T able 41. Parts list—14.1-inch WXGA+ LED-backlight L CD (continued) No. FRU (14.1-inch WXGA+ LED-backlight L CD) FRU no. CRU ID 3 L CD module, 14.1-inch WXGA+ LED-backlight • 2516-CT O , ABx • .
T able 41. Parts list—14.1-inch WXGA+ LED-backlight L CD (continued) No. FRU (14.1-inch WXGA+ LED-backlight L CD) FRU no. CRU ID 4 Hinges • 2516-CT O , ABx • 2518-CT O , C4x, C5x, CEx, CFx, CGx,.
T able 41. Parts list—14.1-inch WXGA+ LED-backlight L CD (continued) No. FRU (14.1-inch WXGA+ LED-backlight L CD) FRU no. CRU ID 7 Wireless ant enna (wir eless LAN/MIMO/WAN) • 2516-CT O • 2518-C.
K eyboard T able 42. Parts list—K eyboard Language FRU no. CRU ID Arabic 45N2076 45N2146 45N2216 Belgian 45N2077 45N2147 45N2217 Brazilian P ortuguese 45N2075 45N2145 45N2215 Bulgarian 45N2078 45N21.
Miscellaneous parts T able 43. P arts list—Miscellaneous parts FRU FRU no. CRU ID Screw kit: • M2 × 3 mm (silver), small head (50) • M2 × 3.5 mm (black), wafer head (15) • M2 × 5 mm (black), wafer head (15) • M2 × 10 mm (black), wafer head (15) • M2 × 14 mm (black), wafer head (10) • M2.
T able 43. Parts list—Miscellaneous parts (continued) FRU FRU no. CRU ID System miscellaneous parts: • (a) Expr ess dummy card • (b) EMI bracket • (c) RJ-11 cable assembly, integr ated • (c).
AC adapters T able 44. P arts list—2-pin A C adapters FRU FRU no. CRU ID 2-pin (65 W , 20 V) adapter (models C T O, xxE, xxF , xxJ, xxL, xxP , xxS, xxU , xxY) 42T5282 2-pin (65 W , 20 V) adapter (mo.
P ower cor ds A ThinkP ad power cord for a specic country or r egion is usually available only in that country or r egion: T able 47. P arts list—2-pin power cords Country or region FRU no. CRU ID Argentina • models -C TO , xxY 42T5020 42T5105 Brazil • models -C TO , xxP 42T5180 42T5183 Canada, U .
Recovery discs Windows XP Professional (32 bit) DVDs Windows XP Pr ofessional (32 bit) is pr einstalled as the oper ating system in the following models: • 2516-CT O • 2518-CT O , C3x, C5x, C Ax, .
Windows Vista Business (32 bit) DVDs Windows Vista Business (32 bit) is pr einstalled as the oper ating system in the following models: • 2516-CT O • 2518-CT O • 2519-CT O • 2522-CT O • 2537-CT O • 2538-CT O • 2539-CT O T able 50.
Windows 7 Home Basic (32 bit) DVDs Windows 7 Home Basic (32 bit) is pr einstalled as the oper ating system in the following models: • 2516-CT O , A2x, A3x, A4x, A5x, A7x, A9x, A Cx, AFx, AHx, AJx, AKx, ALx, AMx • 2518-CT O , DUx, FYx, G3x • 2519-CT O , 87x • 2522-CT O • 2537-CT O • 2538-CT O • 2539-CT O T able 51.
Windows 7 Home P remium (32 bit) DVDs Windows 7 Home Pr emium (32 bit) is pr einstalled as the operating syst em in the following models: • 2516-CT O • 2518-CT O , E9x, EDx, FSx, FUx, FWx, GLx • 2519-CT O , 82x, 83x, 84x, 85x, 89x • 2522-CT O • 2537-CT O • 2538-CT O • 2539-CT O T able 52.
Windows 7 Home P remium (64 bit) DVDs Windows 7 Home Pr emium (64 bit) is pr einstalled as the operating syst em in the following models: • 2516-CT O • 2518-CT O • 2519-CT O • 2522-CT O • 2537-CT O • 2538-CT O • 2539-CT O T able 53.
Windows 7 P rofessional (32 bit) DVDs Windows 7 Pr ofessional (32 bit) is pr einstalled as the oper ating system in the following models: • 2516-CT O , A6x, A8x, AAx, ADx, AEx, AGx, ANx • 2518-CT .
T able 54. P arts list—Windows 7 Professional (32 bit) recovery DVDs (continued) Language P/N CRU ID Simplied Chinese 58Y4305 Slovak 58Y4324 Slovenian 58Y4325 Spanish 58Y4326 T r aditional Chinese 58Y4306 T r aditional Chinese (Hong Kong S.A.R.) 58Y4313 T urkish 58Y4328 Chapter 10 .
Windows 7 P rofessional (64 bit) DVDs Windows 7 Pr ofessional (64 bit) is pr einstalled as the oper ating system in the following models: • 2516-CT O , ABx • 2518-CT O , E8x, EAx, EBx, ECx, EEx, E.
Common service t ools T able 56. P arts list—Common service tools T ool P/N Screwdriver kit 95F3598 1/4" drive spinner handle 1650840 1/4" Sq. to 1/4" hex torx adapt er 93F2838 TR7- TR-10 tamper resistant t orx bits 00P6967 Removal tool antenna RF connector 08K7159 USB 2.
190 ThinkP ad T410 and T410i Har dware Maintenance Manual.
Appendix A. Notices Lenovo may not offer the pr oducts, services, or features discussed in this document in all countries. Consult your local Lenovo repr esentative for information on the pr oducts and services currently available in your area.
T r ademarks The following t erms ar e trademarks of L enovo in the United States, other countries or both: Active Pr otection System Lenovo Rescue and Recover y ThinkLight ThinkP ad ThinkV antage T r.
.
Part Number: 63Y0535_01 Printed in (1P) P/N: 63Y0535_01.
*63Y0535_01*.
An important point after buying a device Lenovo 2518X01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lenovo 2518X01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lenovo 2518X01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lenovo 2518X01 you will learn all the available features of the product, as well as information on its operation. The information that you get Lenovo 2518X01 will certainly help you make a decision on the purchase.
If you already are a holder of Lenovo 2518X01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lenovo 2518X01.
However, one of the most important roles played by the user manual is to help in solving problems with Lenovo 2518X01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lenovo 2518X01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
