Instruction/ maintenance manual of the product MPE-36R Lennox Hearth Products
Go to page of 18
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 1 36" Electric Fireplace P/N 775,172M RE V . B 7 /2004 MODEL: RET AIN THESE INSTRUCTIONS FOR FUTURE REFERENCE MERIT PLUS SERIES This manual will enable you to obtain a safe, effi cient and dependable installation and operation of your electric fi replace.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 2 INTRODUCTION This Electric Fireplace is designed for residential applications to be framed in as a zero clearance fi replace. This appliance has been tested in accor - dance with UL 2021 and CSA C22.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 3 THIS APPLIANCE HAS HOT AND ARCING OR SPARKING PARTS INSIDE. DO NOT USE IT IN AREAS WHERE GASOLINE, PAINT OR FLAMMABLE LIQUIDS ARE USED OR STORED. THIS FIREPLACE SHOULD NOT BE USED AS A DRYING RACK FOR CLOTHING, NOR SHOULD CHRISTMAS STOCKINGS OR OTHER DECORATIONS BE HUNG NEAR IT.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 4 FRAMING SPECIFICA TIONS 37 5/8" (954 mm) 24 " (610 mm) 14 7/8" (32 mm) 5 1/8 " (130 mm) 36 " (914 mm) 2 1/4 " (55 mm) .
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 5 MINIMUM CLEARANCES TO COMBUS- TIBLES Mantel Clearance: Combustible and Non-com- bustible mantels may be installed at any height above the top of the face of fi replace. Cat. No. H1534 Model: MPE-36R Description: Merit Plus Electric Fireplace, 36” Radiant Shipping Weight: 90 lb.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 6 MANUAL CONTROL P ANEL OPERA TION (refer to Figures 5 & 6) Once this appliance has been properly installed and connected to the power supply as defi ned in this manual, it is ready to operate. Note: Ensure the circuit breakers for the power supply are turned on.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 7 • When using the remote control , the power on/off switch inside the body and the wall switch (optional kit) must be on the OFF position. REMOTE CONTROL OPERA TION: Figure 6 CAUTIONS • DO NOT USE OLD BA TTERIES WITH NEW ONES.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 8 Figure 9 MAINTENANCE This appliance has been designed to provide many years of trouble-free service. The com- ponents that will need to be serviced have been kept to a minimum. Periodic dusting of the fi replace is all that should be required.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 9 WARNING: THE FIREPLACE MUST BE UNPLUGGED/DISCONNECTED FROM THE POWER SUPPL Y PRIOR TO ANY MAINTE- NANCE OR CLEANING IN ORDER TO REDUCE THE RISK ELECTRIC SHOCK OR FIRE. CAUTION: DO NOT EXCEED A 35 WA TT BULB.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 10 WIRING DIAGRAM - 120 VOL T Wiring diagrams are provided here for reference purposes only . This information is also provided on schematics attached direct ly to the appliance on the left side. CAUTION: LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVICING CONTROLS.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 11 WIRING DIAGRAM - 240 VOL T Wiring diagrams are provided here for reference purposes only . This information is also provided on schematics attached direct ly to the appliance on the left side. CAUTION: LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVICING CONTROLS.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 12 5 V GROUND INSIDE POWER ON/OFF SWITCH (ON CONTROL PANEL) POWER ON/OFF SWITCH (OPTIONAL WALL SWITCH) OUTSIDE RED RED GREEN 1K POTENTIOMETER 5 V GROU.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 13 Wall Thermostat Black 5 V Left Side of Fireplace Installing Wall Thermostat (optional kit, see page 18) Wire the wall thermostat prior to installing the fi replace. WALL THERMOST A T WIRING (24 VAC): Install Wall Thermostat per instructions provided with kit and per the following information: 1.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 14 Power On/Off Wall Switch Installation (optional kit, see page 18) Wire the wall switch prior to installing the fi replace. WALL SWITCH WIRING (24 V AC): Install Wall Switch per instructions provided with kit and per the following information: 1.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 15 TROUBLESHOOTING SYMPTOM POSSIBLE CAUSES WHO PERFORMS CORRECTIVE ACTIO N CORRECTIVE ACTIO N 1. Fireplac e turns off a nd will not tu rn on. Fireplace ha s overheat ed. Homeowne r The appl iance is protect ed with a safety dev ice to prev ent it fro m overheatin g.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 16 REPLACEMENT P AR TS ITEM NO. DESCRIPTION MPE-36R CA T . NO. QTY 1 Bulb Kit, (10 Each 35w Halogen) H1623 1 2 Side Frames, 1 Left And 1 Right H1624 1.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 17 REPLACEMENT P AR TS COMPONENT DIAGRAMS 17 14 16 11 1 4 2 5 6 6 7 8 12 13 15 19 3 20 1 9 Front View 18 POWER ON/OFF DISPLAY ON/OFF Dimmer Brighter EMBERS HEATER ON/OFF TEMP.
NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. 18 ACCESSORY COMPONENTS The following items are available for use with this appliance. Cat. No. Model Description H1535 GEP-36BL Glass Enclosure Panel, Black on Bronze H1536 GEP-36PB Glass Enclosure Panel, Brass on Bronze H1537 GEP-36BS Glass Enclosure Panel, Stainless on Bronze Cat.
An important point after buying a device Lennox Hearth Products MPE-36R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lennox Hearth Products MPE-36R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lennox Hearth Products MPE-36R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lennox Hearth Products MPE-36R you will learn all the available features of the product, as well as information on its operation. The information that you get Lennox Hearth Products MPE-36R will certainly help you make a decision on the purchase.
If you already are a holder of Lennox Hearth Products MPE-36R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lennox Hearth Products MPE-36R.
However, one of the most important roles played by the user manual is to help in solving problems with Lennox Hearth Products MPE-36R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lennox Hearth Products MPE-36R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
