Instruction/ maintenance manual of the product Merit CPF-38 Lennox Hearth Products
Go to page of 8
1 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE HOMEOWNER'S CARE AND OPERA TION INSTRUCTIONS The information contained in this manual applies to all model fireplaces identified on this page. This information will help you obtain safe and dependable service from your fireplace system.
2 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE 3. The metal chimney sections extending from the firebox top to beyond your roof are two walled and air-cooled. The inner passage, or flue, provides the exit for smoke and gases. 4. The flue damper is either fully open or fully closed by the handle you find in the center and top of the firebox.
3 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE Wood Fuel Pointers Wood is a wonderful renewable fuel source. Normally it burns clean, leaving only a minimum of waste ash, provides comforting heat and can provide a variety of aromas and visual images.
4 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE Assuming that you are comparing two standard cords of different species but the same volume and moisture content, the denser species will provide more BTU’s. The table of wood species/ densities reveals more helpful guidelines.
5 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE On the Merit Series fireplaces, the control lever that operates the outside combustion air valve is located on one lower side behind the screen panel. Push the lever all the way in to open the air valve and pull the lever all the way out to close the air valve ( Figure 6 ).
6 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE If conditions 1, 2 or 3 occur, the refractory should be replaced. For minor defects, repair as noted above. MAINTENANCE GUIDELINES Your fireplace is designed to operate trouble- free with minimum maintenance.
7 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE Figure 8 10' 2' Min. 2' Min. Less Than 10' 3' Min. 3' Min. 6. Is a vent fan, exhaust hood or central heating/cooling sys.
Printed in U.S.A. © 2007 by LENNOX HEARTH PRODUCTS P/N 875,040M REV. N/C 01/2007 The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.
An important point after buying a device Lennox Hearth Products Merit CPF-38 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lennox Hearth Products Merit CPF-38 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lennox Hearth Products Merit CPF-38 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lennox Hearth Products Merit CPF-38 you will learn all the available features of the product, as well as information on its operation. The information that you get Lennox Hearth Products Merit CPF-38 will certainly help you make a decision on the purchase.
If you already are a holder of Lennox Hearth Products Merit CPF-38, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lennox Hearth Products Merit CPF-38.
However, one of the most important roles played by the user manual is to help in solving problems with Lennox Hearth Products Merit CPF-38. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lennox Hearth Products Merit CPF-38 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
