Instruction/ maintenance manual of the product Model C3 and C3BLK APC
Go to page of 20
User Manual C T ype Power Filter Model C3 and C3BLK.
Entire content s copyright © 2 010 American Power Conversion Corporation. All right s reserved. Reproduction in whole or in p art without permission is prohi bited. APC, the APC logo, and TRADE MARK NAMES are trademarks of Amer ican Power Conversion Corporatio n.
v T able of Content s Safety Information i Protect Y our Investment iii Class B Labeling and Instru ction Manual Requ irement s vi Introduction 1 Proven Expertise…Proven Reliability 1 Safety Precaut.
vi.
iii Registration V erifi cation Confir mation By registering your purchase now, it guarantees you will receive all the informati on and special offers you qualify for as the owner of this product. By registering your purchase now , you have a way to confirm yourself as the owner of the product in the event of fire, thef t or loss.
iv Class B Labeling and Instruction Manual Re quirements Devices subject to Certification must be labeled with an FCC Identifier . Devices subject to V erification or Ce rtification must be labeled with the following compliance statem ent: This device complies with Part 15 of the FCC Rules.
- 1 - Introduction Congratulations on purcha sing APC’ s C3 Power Filte r , shown in Figure 1. The power filter come s in two models. The C3 is silver and the C3BLK is black. However , the C3 and C3BLK ha ve the same performance, features and functionality .
- 2 - Safety Precautions Please ens ure that you have read and understand all of the safety information located in the front of th is manual. If you ha ve any questio ns about the safety information, .
- 3 - Features The following paragraphs describe the Model C3 Power Filter’ s major features. Surge Protection The C3 Power Filter provides a high leve l of surge protection for the voltage going into the unit, and thus protect s the devices connected to the unit.
- 4 - T op Panel The following section descr ibes the controls and indi cators on the top panel. T op Panel Controls and Indicators The top panel controls and indicators for the C3 Po wer Filter are detailed in Figure 2. Each numbered callout re fers to a corresponding numbered description found immediately below the picture.
- 5 - Outlet Panel and Side Panel This section describes outlet pa nel and side panel functionality . Outlet Panel Contro ls and Indicators The outlet panel for the C3 Power F ilter is shown in Figure 3. Each of the numbered callouts refers to the co rresponding numbered description found below , and on the following pages.
- 6 - Side Panel Contr ols and Indicato rs The side panel conn ectors for the C3 Power Filte r are detailed in Figure 4. Each numbered callout refers to a correspon ding numbered description found in the following pages.
- 7 - Surge Pr otected T elephone Jacks The C3 provides a teleph one circui t with surge protection to protect components connected via teleph one line. Connect the supplied RJ1 1 telephone cable fro m the wall jack (source) to the telephone line connect or marked IN .
- 8 - Inst allation C3/C3BLK installation consists of the following steps: 1. Make connections 2. Apply power Make Connections Prior to connecting equipment to the C3 Power Filter , ensure the unit is functioning by connecting th e AC Power Cord (provided) on the side p anel, shown as , in Figure 4.
- 9 - T echnical Specifications The following table contains the speci fications for the C3 and C3BLK Power Filters. Item Specification INPUT Input V oltage Range for Operation (on utility) 92V to 140.
- 10 - T roubleshooting This section describes possible cause s and solutions for the following problems: • Unit will not turn on . • WIRING OK indicator LED is not il luminated. Unit will not turn on Probable Cause: Input power cord is not connected properly .
- 11 - WIRING OK indicator LE D is not illuminated APC T echnical Support If a problem cannot be resolved contact APC T echnical Support. T elephone: 1-888-88APCA V , or visit: www .apcav .com Probable Cause: There are three reasons why this LED would not be illuminated: 1.
- 12 -.
.
08/2006 990-2929.
An important point after buying a device APC Model C3 and C3BLK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought APC Model C3 and C3BLK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data APC Model C3 and C3BLK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, APC Model C3 and C3BLK you will learn all the available features of the product, as well as information on its operation. The information that you get APC Model C3 and C3BLK will certainly help you make a decision on the purchase.
If you already are a holder of APC Model C3 and C3BLK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime APC Model C3 and C3BLK.
However, one of the most important roles played by the user manual is to help in solving problems with APC Model C3 and C3BLK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device APC Model C3 and C3BLK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
