Instruction/ maintenance manual of the product Mini-001 Lenco
Go to page of 8
JOB: 7331U-007(LENCO)(MINI-001)(22/1 1/2005) SIZE: 148.5(W) X 210(H)mm INSTRUCTION MANUAL MODEL: MINI-001 BEDIENUNGSANLEITUNG MODELL: MINI-001 MANUAL DE INSTRUCCIONES MODELO: MINI-001 GEBRUIKSAANWIJZI.
ENG-2 ENG-1 Safety Precautions • Never open the cabinet under any circumstances.Any repairs or internal adjustments should be made only by a trained technician.
ENG-3 ENG-4 CD Unit Front Panel Descriptions 1. ON/ST ANDBY button to turn on and off the unit. 2. Remote sensor to receive remote control signal. 3. LCD display . 4. FUNCTION button to select CD/USB/SD-MMC/TUNER/AUX source. 5. PROG/MEM button to select program playback or tuner station memories.
ENG-6 ENG-5 • Activating the Timer (by remote) 1. Follow "Setting the T imer" section to set your desired on-time and off time. 2. Press TIMER button on the remote to activate the timer . 3. The TIMER icon will be lit up. 4. When the clock time reaches the off-time, the unit will be turned of f and put into standby mode.
ENG-8 ENG-7 12. Press the PLA Y/P AUSE button to pause the playback. 13. T o resume playback from the same point, press the PLA Y/P AUSE button again. 14. T o stop playback, press the STOP button. 15. Press NEXT button once will jump to next track. 16.
PROG NO. AM FM 1 522KHz 87.50MHz 2 603KHz 90.10MHz 3 999KHz 98.10MHz 4 1404KHz 106.10MHz 5 1620KHz 108.00MHz 6 522KHz 87.50MHz | | | | | | 10 522KHz | | - | | - | 20 - 87.50MHz • RDS Operation 1. Tune to a desired radio station by following the step described in T uner Operation - T uning a Radio Station.
• Recording Operation - File Format and File Location 1. All recorded file will be in MP3 format and put into a RECORD folder . 2. If it is recording from CD and CD-MP3, the recorded file will be put in CDRECNNN sub-folder , where NNN is a sequential number , e.
6. The recorded file will be stored in the selected media. See Recording Operation - File Format and File Location for more details. • Using AUX Input 1. Press FUNCTION button repeatedly until "AUX" is shown. 2. Connect external audio source (Left/Right) to the AUX INPUT at the back of the CD unit.
An important point after buying a device Lenco Mini-001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lenco Mini-001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lenco Mini-001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lenco Mini-001 you will learn all the available features of the product, as well as information on its operation. The information that you get Lenco Mini-001 will certainly help you make a decision on the purchase.
If you already are a holder of Lenco Mini-001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lenco Mini-001.
However, one of the most important roles played by the user manual is to help in solving problems with Lenco Mini-001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lenco Mini-001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
