Instruction/ maintenance manual of the product ISTO D210 Leica
Go to page of 14
Leica DISTO TM D210 The original laser distance meter.
Leica DISTO TM D210 788217a 1 EN Table of Contents Instrument Set-up - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - .
Leica DISTO TM D210 788217a 2 EN Instrument Set-up Overview The safety instructions and the user manual should be read through carefully before the product is used for the first time. The person responsible for the product must ensure that all users understand these directions and adhere to them.
Leica DISTO TM D210 788217a 3 EN Operations Switching ON/OFF Clear Message Codes ON OFF 2 sec Device is turned OFF. i Press ON button 2 sec to s tart continuous laser mode. 1x Undo last action. 2x Leave actual func- tion, go to de fault operation mode.
Leica DISTO TM D210 788217a 4 EN Operations Beep ON/OFF Illumination ON/OFF 2 sec simulta ne- ously 2 sec simultane- ously Keypad lock ON Keypad lock OFF 2 sec simulta ne- ously PRESS MINUS 1 withi n .
Leica DISTO TM D210 788217a 5 EN Measuring Functions Measuring single distance 1 Aim active laser at target. 2 8.532 m 3 i Target surfaces: Measuring errors can occur when measuring to colourless liquids, glass, styrofoam or permaebl e surfaces or when aiming at high gloss surfaces.
Leica DISTO TM D210 788217a 6 EN Measuring Functions Area 1 1x 2 Aim laser at first target point. 3 4 Aim laser at sec- ond target point. 24.352 m 2 5 i The result is shown in the main line and the measured value above. Partial Measurements: Press + or - after starti ng the first measurement.
Leica DISTO TM D210 788217a 7 EN Measuring Functions Pythagoras (2-point) 1 4x 2 Aim laser a t upper point. 3 4 Aim laser rectan- gular at lower point. 8.294 m 5 i The result is shown in the main line and the measured distance above. Pressing the measuring key for 2 sec in the func- tion activates auto mati- cally Minimum or Maximum measure- ment.
Leica DISTO TM D210 788217a 8 EN Measuring Functions Stake out 1 2 3 1 .000 m 1 6x 0.625 m 2 Adjust value. 3 Approve value and start measur ement. 4 Move device slowly along the stake-out line. The distance to the next stake out point is displayed. 0.
Leica DISTO TM D210 788217a 9 EN Technical Data * applies for 100 % target reflectivity (white painted wall), low ambient light, 25 ºC ** applies for 10 to 500 % target reflectivity, high ambient light, - 10 ºC to + 50 ºC *** Tolerances apply from 0.
Leica DISTO TM D210 788217a 10 EN Care • Clean the device with a damp, soft cloth. • Never immerse the device in water. • Never use aggressive cleaning agents or solvents. Disposal CAUTION Flat batteries must not be disposed of with household waste.
Leica DISTO TM D210 788217a 11 EN Safety Instructions Hazards in use WARNING Watch out for erroneous measurements if the instrument is defective or if it has been dropped or has been misused or modified.
Leica DISTO TM D210 788217a 12 EN Safety Instructions Laser classification The device produces visible laser beams, which are emitted from the instrument: It is a Class 2 laser product in accordance w.
Leica Geosystems AG CH-9435 Heerbrugg (Switzerland) www.disto.com Leica Geosystems AG, He erbrugg, Swit zerland has been certified as being equipped with a quality system which meets the International Standards of Quality Management and Quality Syst em s (ISO standard 9001) and Environ- mental Management Systems (ISO standard 14 001).
An important point after buying a device Leica ISTO D210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Leica ISTO D210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Leica ISTO D210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Leica ISTO D210 you will learn all the available features of the product, as well as information on its operation. The information that you get Leica ISTO D210 will certainly help you make a decision on the purchase.
If you already are a holder of Leica ISTO D210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Leica ISTO D210.
However, one of the most important roles played by the user manual is to help in solving problems with Leica ISTO D210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Leica ISTO D210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
