Instruction/ maintenance manual of the product 106 Z Leica
Go to page of 16
Leica Lamp housing and mercury burner lamp User Manual.
2 Leica lamp housing and mercury burner T able of contents Page 1. Safety concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1 Description 1.2 Safety precautions For the Leica MZ16 FA 3 Leica lamp housing and mercury burner 1. Safety concept The Leica 106 z lamp housing is the light source for the fluorescence stereomicroscope Leica MZ16 F A as well as the fluorescence module for Leica stereomicroscopes.
Lamp housing The Leica MZ16 F A fluorescence stereomicroscope and the fluorescence module for Leica stereomicroscopes may only be used in combination with the Leica lamp housing for 100W or 50W mercury burners, their corresponding supply units and stray-light protection.
Supply units The 100W mercury burners are powered by the ebq 100 supply unit. Read the separate instruction manual provided with this supply unit. The supply unit for 50W mercury burners is described in this manual. For the ebq supply unit: only fuses of the specified type with the listed rated current may be used.
• Use the stray-light protection. Danger to eyes from UV radiation. • During assembly work on xenon burners, always wear the protective gloves and face protection provided. Risk of explosion • Electrical components must be assembled at least 10 cm away from the wall and from flammable substances.
The Leica Microsystems 106 z lamp housing is used. If the 105 z lamp housing model is available, it can also be used. Follow the safety instructions! The following gas discharge lamps can be used. They require different types of lamp mounts. Order No.
Unscrew the 2 hexagon-head screws. Carefully pull out the base with lamp mount and connecting cable. Unscrew the top Phillips screw . Pull up the cooling element and pull it to the side. Unscrew the bottom clamping system. Remove the transport anchor and store it for later transport.
Adjust the collector on a trial basis using the focusing knob. • During this process, the collector may not come into contact with the flexible power supply . If necessary , bend the power supply away from the collector . Carefully close the lamp housing and make sure that the contact plug is set firmly in the socket.
Unscrew the hexagon-head screw on the adapter part using an Allen key . Insert the lamp housing into the adapter part and tighten the hexagon-head screw .
Pull the focusing knob outward. Carefully replace the collector and push it to the left until the focusing knob comes to a stop in the guide groove. Adjust the collector on a trial basis. Reinstall the lamp base and close the lamp housing.
4.1 Supply unit for lamp housing 106 z with 50W mercury lamp 12 Leica lamp housing and mercury burner T ype 301-185.003/10372 Input: 220V/240V ±10% 220V ~ 50/60Hz Hg 50W L1/L2 Osram No. 0-958 P . Max. 320V A 1. On/off switch 2. Operating time meter 3.
T o minimize the risk of explosion, replace a discolored high-pressure mercury burner promptly when it has reached the end of its rated life. Follow the manufacturer’ s specifications and the minute meter on the supply unit! Switch on the supply unit.
14 Leica lamp housing and mercury burner After installing the mercury burner , adjust it exactly as de- scribed. Never let the bright tips of the electric arcs, the focal spots, cross when projected. Danger of explosion from overheating Adjustment is also important to obtain a homogenous light surface and good fluorescence.
15 Leica lamp housing and mercury burner 3 2 1 5 4 6 Hg 50W Hg 100W Fig. a: Focus the arc. Fig. b: Position the arc at the crosshairs. Fig. c: Focus and position the second arc.
Leica Microsystems – the brand for outstanding products Leica Microsystems – an international company with a strong network of customer services Australia: Gladesville, NSW T e l. +1 800 625 286 Fax +61 2 9817 8358 Austria: Vienna T e l. +43 1 486 80 50 0 Fax +43 1 486 80 50 30 Canada: Richmond Hill/Ontario Tel.
An important point after buying a device Leica 106 Z (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Leica 106 Z yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Leica 106 Z - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Leica 106 Z you will learn all the available features of the product, as well as information on its operation. The information that you get Leica 106 Z will certainly help you make a decision on the purchase.
If you already are a holder of Leica 106 Z, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Leica 106 Z.
However, one of the most important roles played by the user manual is to help in solving problems with Leica 106 Z. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Leica 106 Z along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
