Instruction/ maintenance manual of the product LCD36 Legacy Car Audio
Go to page of 8
OWNER’S MANUAL LCD36 MANUALL Y TUNED STEREO RADIO WITH COMP ACT DISC PLA YER DIGITAL LEGACY ®.
2 Installation ..................................................................................................... 3 Remove The Unit From The Dash Boar d ....................................................4 Operation ...............................
3 Bracket Fire W all DASH BOARD HEX NUT SPRING WASHER T APPING SCREW PLAIN WASHER CONSOLE MOUNTING HOUSING MET AL MOUNTING STRAP HEX BOL T INST ALLA TION Here is the installation diagram. Precautions 1. Choose the mounting location where the unit will not interfere with the normal driving functions of the driver .
4 REMOVE THE UNIT FROM THE DASH BOARD 1. Remove the metal strap attached to the back of the unit. 2. Disconnect all the wir es of the unit and the antenna plug. 3. Remove the handle frame fr om the trim plate. 4. Insert the scr ew driver into the slot as shown, and slide the unit out of the dash board while holding the trim plate.
OPERA TION GENERAL OPERA TION • ON/OFF Press POWWR button (1) to turn on the unit. Press it again to turn it off. • BALANCE Rotate the button (2) clockwise or anti-clockwise to adjust sound balance between left and right speakers. • VOLUME Rotate the button (3) clockwise or anti-clockwise to adjust volume level.
6 RADIO OPERA TION • BAND Press BND button (7) to change bands as below: FM AM • SELECT ST A TION Rotate the TUNING knob (8) clockwise or anti-clockwise to adjust the frequency upward or downwar d.
7 CD OPERA TION • DISC PLA Y Gently insert a compact disc with the label side facing up into the disc slot (13) . The disc is then automatically loaded into the unit and starts playing with the first track of the disc. The digital display will indicate the track number and the time of the track.
www .legacycaraudio.com WIRING CONNECTION SPECIFICA TION General Power Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 163 (D) x 51 (H) mm Maximum Output Power : 7 W.
An important point after buying a device Legacy Car Audio LCD36 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Legacy Car Audio LCD36 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Legacy Car Audio LCD36 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Legacy Car Audio LCD36 you will learn all the available features of the product, as well as information on its operation. The information that you get Legacy Car Audio LCD36 will certainly help you make a decision on the purchase.
If you already are a holder of Legacy Car Audio LCD36, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Legacy Car Audio LCD36.
However, one of the most important roles played by the user manual is to help in solving problems with Legacy Car Audio LCD36. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Legacy Car Audio LCD36 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
