Instruction/ maintenance manual of the product BN1350G APC
Go to page of 10
Inst allation and Operation Back-UPS ™ BX1300G/BN1350G/BX1500G Inventory Safety and General Information Connect the Battery The battery charges fully during the first 16 hours while the Back-UPS is operating on AC power . Do not expect full battery runtime capability durin g the ini tial charge period.
Installation and Op eratio n Back-UPS BX1300G/BN1350G/BX1500G 2 PowerChute ™ Personal Edition Sof tware Overview PowerChute Personal Ed ition Software allows you to use your computer to access ad ditional power protection and management features of the Back-UPS.
Installation and Operation Back-UPS BX1300G/BN1350G/BX1500 G 3 Connect the Equipment T urn On the Back-UPS Press the Power ON button located on the top of the Back-UPS . The Power On LED will illuminate and a single short beep will be audible to indicate that the Back -UPS is providing protection for conn ected equi pm ent.
Installation and Op eratio n Back-UPS BX1300G/BN1350G/BX1500G 4 Operation Power-Saving feature This Back-UPS is equipped with power saving outlets that conserve electricity .
Installation and Operation Back-UPS BX1300G/BN1350G/BX1500 G 5 Front p anel buttons and display Use the buttons on the front panel of the Back-UPS and the display in terface to configure the Back-UPS.
Installation and Op eratio n Back-UPS BX1300G/BN1350G/BX1500G 6 Modes of operation Press D ISPLAY to scroll through the display screens. St atus indicators System fault s On Line Mode On Battery Mode .
Installation and Operation Back-UPS BX1300G/BN1350G/BX1500 G 7 Feature Quick-Reference Function Button Tim in g (seconds) UPS St a t u s Description Power POWER ON 0.2 Off Pres s the POWER ON / OF F button to turn on the Back-UPS and operate on AC power .
Installation and Op eratio n Back-UPS BX1300G/BN1350G/BX1500G 8 T roubleshooting Problem Possible Cause Corrective Action Back-UPS will not turn on. The Back-UPS is not connected to AC power . Be sure that the Back-UPS is securely connected to an AC outlet.
Installation and Operation Back-UPS BX1300G/BN1350G/BX1500 G 9 S pecifications Service If the unit requires service, do not retu rn it to the dealer . Fo llow these steps: 1. Review the T ROUBLESHOOTING section of the manual to eliminate common problems .
Customer support and warrant y information is availabl e at the APC W eb site, www .apc.com . © 2012 APC by Schneider Electric. APC, the APC logo, PowerChute and Back-UPS are owned by Schneider Electric Industries S. A.S., American Power Conversion Co rporation, or their affiliated companies.
An important point after buying a device APC BN1350G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought APC BN1350G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data APC BN1350G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, APC BN1350G you will learn all the available features of the product, as well as information on its operation. The information that you get APC BN1350G will certainly help you make a decision on the purchase.
If you already are a holder of APC BN1350G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime APC BN1350G.
However, one of the most important roles played by the user manual is to help in solving problems with APC BN1350G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device APC BN1350G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
