Instruction/ maintenance manual of the product 1200 Series Lathem
Go to page of 12
1200 SERIES User ’ s Manual.
Lathem Time Corporation 200 Selig Drive, SW Atlanta, GA 30336 1-800-241-4990 1-404-691-0400 www.lathem.com Copyright © 2003 Lathem Time Corpo ration. All rights reserved.
Content s Here’s all the information you need for setting and operating you r new Lathem time recorder. Service information is also includ ed in this manual, in case any problem s ever arise. Thank you for choosing a Lathem time recorde r. Should you ever need assistance, please let us kno w.
1200 Series User’s Manual 2 Ordering Accessories Lathem time recorders fulfill a wide range of timekeeping requirements. For maximu m results, only use Lathem accessories specifically design ed to fit your time recorder. To purchase the appropriate acce ss ories for your time recorder, contact your local Lathem dealer or visit : http://shop.
1200 Series User’s Manual 3 Setting the T ime Figure 1 Raise the Type Sec tion 1. Unlock the case cover and pull it forward to remove it. 2. Wait until you hear the clock “click”.
1200 Series User’s Manual 4 Set the Time on the Type Wheels Figure 2 1. Locate the Center Line where all the wheels line up a s shown in Figure 2 . 2. Rotate the wheels using a pointed obj ect. Rotate each wheel until the correct date and time are aligned at the Center Position, as shown in Figure 2 .
1200 Series User’s Manual 5 the Type Section down and pre ss it firmly into the Type Section Headlock. 8. Make a sample registratio n and verify the time and date or day is correct. 9. Replace and lock the case cover. Set the Time on the Clock Face Figure 3 1.
1200 Series User’s Manual 6 Changing the Ribbon Lathem time recorders have self-reversi ng ribbons. With normal use, a ribbon should last for many month s or even years….and when the time comes, it is easy to change. Figure 4 1. Remove the top cover and raise type se ction (see “Raise the type section” on page 3.
1200 Series User’s Manual 7 Replacing the T ype Section If your type section needs servicing, you can easily remove and replace it with a spare, without sending t he entire machine for service. Figure 5 1. Remove the top cover. 2. Remove Type Section Retaining Ring – 5.
1200 Series User’s Manual 8 Changing the Motor Figure 6 1. Unplug cord from wall outlet. 2. Remove type section from main frame (see “Repla cing the Type Section”). 3. Figure 6 shows a close-up of cam blo ck terminal. 4. Disconnect Motor Wire Leads – 6.
1200 Series User’s Manual 9 W arranty One-Year Limited Warra nty Lathem warrants the hardware products des cribed in this guide against defects in material and workmanship for a period of on e year from date of original purchase.
Printed in USA P/N: OMTR12-0603.
An important point after buying a device Lathem 1200 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lathem 1200 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lathem 1200 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lathem 1200 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Lathem 1200 Series will certainly help you make a decision on the purchase.
If you already are a holder of Lathem 1200 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lathem 1200 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Lathem 1200 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lathem 1200 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
