Instruction/ maintenance manual of the product CB-USBT-R02 Laser
Go to page of 15
- 1 - System Requi rements ■ Microsoft Windows 98SE / ME / 2000 / XP / Vista ■ Mac OS X, 10.2 or later ■ USB Port 〈 1.1 / 2.0 〉 ■ No driver installation required except the Windows 98 SE. [Note] What does the (Remote Host) and (Lo cal Host) window stand for 1.
- 2 - Windows OS Using EasyCN.exe Program 1. After you connect the USB data transfer cable into the USB port of two computers, the program will be started automatically, if not, please double click the (EasySuite) on the EasySuite CDROM drive.
- 3 - 2. When the EasySuite program is executed on both computers, the connection will be made automatically. The following figure s hows the file manager windows for the two connected computers after the connection is successfully made.
- 4 - EasyCopy-Net Function The Introduction to Operation Window 1. Menu Function 2. Create new folder Click the right mouse button in the right side list window and select (Make Directory) command from pop-up edit menu to create new folder.
- 5 - 3. Cut 、 Copy 、 Pa ste 、 Delete 、 and Select All functions You can use these functions by selecting the file and right click the mouse button to pop-up the menu or select the (Edit) m enu from top of window. 4. View and Window Change the file/folder display and file manager windows layout.
- 6 - Function Description File Transfer 1. How to release the (Read Only) protection 1) Select (System → Setup)command. 2) Clear the check of (Shared as Read Only).
- 7 - 2. How to precede the file transfer Method 1: Select the file to be transferred and drag and drop it into the destination directly. Method 2: Select the file to be transferred and right click the mouse button and use the command in pop-up menu to (Copy) and (Paste) it in the destination.
- 8 - Stop the EasyCopy-Net 1. Select (System → Exit) command or click the " X " button to exit the program. 2. Click the ( Safel y Remove Hardware) icon at the system tray to safely stop the device and plug out the USB d ata transfer ca ble from the computer, the EasyCopy-Net program will be removed from the computer.
- 9 - Mac O S The steps to start EasyMacCopy 1. Insert the data transfer cable into the USB port of the computer, the Easy Suite CDROM Icon will be showed up in the desktop, double-click this icon to open the drive and find the EasyMacCopy program; double-click it to start the program.
- 10 - 2. After the Easy Suite program was run in the both side of the computer, you can precede the file transfer..
- 1 1 - EasyMacCopy Functions The Introduction to Operation Window 1. The function toolbar is at the top of operation window 2. Create new folder Click (New Folder) icon in the toolbar or pre ss (Control) with clicking the mouse button at the right-side window to create a new folder.
- 12 - 3. Rename 、 Refresh 、 Move to Trash 、 and Copy functions Select the file and press (control) with clicking the mouse button to pop-up the function menu. 4. Cut 、 Copy 、 Pa ste 、 Delete 、 and Select All unction’s Click (Edit) pull-down the menu on the top of window to open the function menu.
- 13 - Function Operation 1. How to release the (Read Only) protection 1) Click (EasyMacCopy) to pull- down the menu on the top of window and select 2) (Setup) item, a setup window will be displayed, clear the check of (Share as Read Only) to turn off the protection.
- 14 - 2. How to make the file transfe r Method 1: Select the file to be transferred and drag and drop it into the destination directly. Method 2: Select the file to be transferred and press (control) with clicking the mouse button to (Copy) and (Paste) it to the destination.
- 15 - The steps to stop EasyMacCopy 1. Click the left-top corner of EasyMa cCopy window; select (Quit EasyMAcCopy) to exit the program. 2. Drag and drop the Easy Suite CDROM icon on the desk top into the Trash, and remove the data transfer cable from the computer.
An important point after buying a device Laser CB-USBT-R02 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Laser CB-USBT-R02 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Laser CB-USBT-R02 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Laser CB-USBT-R02 you will learn all the available features of the product, as well as information on its operation. The information that you get Laser CB-USBT-R02 will certainly help you make a decision on the purchase.
If you already are a holder of Laser CB-USBT-R02, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Laser CB-USBT-R02.
However, one of the most important roles played by the user manual is to help in solving problems with Laser CB-USBT-R02. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Laser CB-USBT-R02 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
