Instruction/ maintenance manual of the product AQTB8 Lanzar Car Audio
Go to page of 4
Mounting the subwoofer 1. Find a suitable location in the vehicle in which to mount the amplifier. A typical location is shown below: 2. Make sure there is sufficient air circulation around the intended mounting location. 3. Mark the location for mounting hole screws by positioning the cabinet where you wish to install it.
AQTB8 AQTB8 8” 1000 Watts Low-Profile Super Slim Active Amplified Marine/Waterproof Subwoofer System 1000.
AQTB8 AQTB8 AQTB8.
AQTB8 Front panel controls and features 6 • • • CD POWER ON LED INDICATOR @ PHASE SHIFT Use this switch to help compensate for time alignment problems in the system. Such problems usually result from having the subwoofer at a different distance from the listener than the other speakers in the system.
An important point after buying a device Lanzar Car Audio AQTB8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lanzar Car Audio AQTB8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lanzar Car Audio AQTB8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lanzar Car Audio AQTB8 you will learn all the available features of the product, as well as information on its operation. The information that you get Lanzar Car Audio AQTB8 will certainly help you make a decision on the purchase.
If you already are a holder of Lanzar Car Audio AQTB8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lanzar Car Audio AQTB8.
However, one of the most important roles played by the user manual is to help in solving problems with Lanzar Car Audio AQTB8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lanzar Car Audio AQTB8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
