Instruction/ maintenance manual of the product 2055D Lanzar Car Audio
Go to page of 9
USER’S MANU AL AMPLIFIERS: AMPLIFIERS: MAXP 1200 / 1055D / 1201D / 1601D / 2051D / 2055D / 2651D.
TABLE OF CONTENTS Contents and introdction - --- --- --- --- --- --- --- --- --- --- ------ --- --- --- --- --- -- Page J Amplifier featuer descriptions -- --- --- --- --- --- --- --- --- --- -- - --- --- --- --- --- -- _.
AMPLIFIER FEATUER DESCRIPTIONS ~IZOO ~, o ~. I. Une Out RCA Jacks· The LINE OUT allows you to build multiple amplifier systems without having to use splitter cords to distribute the signal. Now it is simple a matter of bringing one set of RCAs into the first amplifier, then using the line out RCA jacks as the feed to the next amplifier.
MAXPI ZOO MONO BLOCK AMPLIFIER APPLICATIONS Basic application Interconnect cable checklist: - Connect the line inputs to a Radio/CD RCA outputs or line output of the full range primary amplifier with good quality RCA cables. A "Y" adapter may be needed as shown in the diagram.
~PI055D/~PI201D/~PI601D/~P2051D/~P2651D ~P2055D MONO BLOCK CLASS D AMPLIFIER APPLICATIONS Basic application Interconnect cable checklist: - Connect the line inputs to a Radio/CD RCA outputs or line output of the full range primary amplifier with good quality RCA cables.
SETTING UP SYSTEMS AFTER INSTALLATION FOR BEST PERFORMANCE General: At this point you are ready to get more specific on the settings for your amplifier. Subsonic: This setting acts as a low frequency cut off for your system bass reproduction. The point that you set it at cuts off any frequencies from reproduction beyond this point.
Lanzar MAX PRO SERIES AMPLIFIER FEATURES output Power Rating MAXPI200 MAXPIOSSD MAXPI20lD MAXPI60lD MAXP20SID MAXP205SD MAXP26SID 4Ohmload 450xl Ix250W Ix500W Ix750W lxl000W lx625W lx1250W 2-Ohm load 900xl lx500W Ix 1 OOOW lx1500W lx2000W lx1250W lx2500W l-Ohm load 1800xl lxl000W lx2000W lx3000W lx4000W lx2500W lx5000W O.
TROUBLESHOOTING Before removing your amplifier, refer to the list below and follow the suggested procedures. Always test the speakers and their wires first. AMPLIFIER WILL NOT POWER UP. Check for good ground connection. Check that remote DC terminal has at least 13.
.
An important point after buying a device Lanzar Car Audio 2055D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lanzar Car Audio 2055D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lanzar Car Audio 2055D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lanzar Car Audio 2055D you will learn all the available features of the product, as well as information on its operation. The information that you get Lanzar Car Audio 2055D will certainly help you make a decision on the purchase.
If you already are a holder of Lanzar Car Audio 2055D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lanzar Car Audio 2055D.
However, one of the most important roles played by the user manual is to help in solving problems with Lanzar Car Audio 2055D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lanzar Car Audio 2055D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
