Instruction/ maintenance manual of the product LMS8-A Lantronix
Go to page of 7
LMS8-A Mini Switch Installation Guide.
2 LMS8-A Mini Switch The Lantronix LMS8-A Mini Switch brings the perfor mance advantages of Ethernet switching to the workgroup. The advantages include: 1.
3 Installation Tips Note: These tips are additional to the Installation Instructions that can be found on the back of the unit. ▼ All ports on the LMS8-A can suppor t full duplex operation - please make sure that each port has the proper switching setting for the desired modes (default switch set- tings are for half duplex).
4 Cable Requirements The Lantronix LMS8-A is compatible with UTP (unshielded twisted pair) and STP (shielded twisted pair) cables. EIA category 3,4 or 5 cables can be supported on the RJ45 connectors. All ports of the LMS8-A are configured as MDI-X ports; Por t 2 has an MDI option for connecting to hubs, repeaters or other switches.
5 T echnical Support If pr oblems occur during product operation, please check the LMS8-A switch settings, cables, connectors, network terminators, hardware compatibility and other network components first.
6 Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014) Manufacturer’ s Name: Lantronix Manufacturer’ s Address: 15353 Barranca Parkway Irvine, CA 92618 USA declares, that the pro.
I mportant Instructions For LMS and LFX Installation ▼ Design connections to avoid loops - these unmanaged switches do not support Spanning T ree Algorithm ▼ If using dedicated switch ports for a .
An important point after buying a device Lantronix LMS8-A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lantronix LMS8-A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lantronix LMS8-A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lantronix LMS8-A you will learn all the available features of the product, as well as information on its operation. The information that you get Lantronix LMS8-A will certainly help you make a decision on the purchase.
If you already are a holder of Lantronix LMS8-A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lantronix LMS8-A.
However, one of the most important roles played by the user manual is to help in solving problems with Lantronix LMS8-A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lantronix LMS8-A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
