Instruction/ maintenance manual of the product XS 25000 AB Soft
Go to page of 8
Switch mode B A TTER Y CHAR GER For lead-acid batteries MUL TI XS 25000 XS 25000 MUL TI XT 14000 XT 14000 User Manual and Guide to professional charging of starter and deep cycle batteries.
2 INTRODUCTION Congratulations on purchasing your new CTEK professional switch mode battery charger . This charger is part of a range of professional battery chargers from CTEK SWEDEN AB. It represents the latest technology in battery charging with charging and analysis in eight steps with temperature compensation.
3 IMPORT ANT INFORMA TION FOR MUL TI XT 14000 and XT 14000 Please note that the battery pack in the 24 V system in most cases consists of more than one battery . They are linked up to the 24 V system, but the individual batteries generally have a lower voltage.
4 Recond (Lamp 5) (only on MUL TI XS 25000 and MULTI XT 14000) This mode is used to recover deeply discharged flooded batteri es. Recondition of deep discharged batteries.
5 TEMPERA TURE COMPENSA TION MUL TI XS 25000, XS 25000, MULTI XT 14000 and XT 14000 have a sensor cable placed together with the battery cables. The units will automatically adjust the charging voltage if the temperature deviates from +25 C. A high temperature lowers the voltage and freezing conditions is handled by higher voltage.
6 P ARAMETERS PROGRAM DESCRIPTION Current (Amperes) V oltage (V olts ) Desulphation Soft Start Bulk Absorption Recovers a sulphated battery T ests the battery condition Bulk charge Peak charge with minimal fluid loss MUL TI XS 25000 MODE Desulphation Soft Start Bulk Absorption NORMAL or RECOND YES Max 10 A for 4 h until the voltage reaches 12 V .
7 Analysis Recond Float Pulse T ests whether the battery retains the energy Reconditioning of a drained battery Maintenance for maximum performance Maintenance for maximum battery life Analysis Recond Float Pulse Warning indication if voltage drops to 12.
8 MAINTENANCE The charger is maintenance-free. The charger must not be opened; doing so will invalidate the warranty . If the power cable is damaged it must be replaced by CTEK or its authorized representative. The charger casing can be cleaned using a damp cloth and mild cleaning agent.
An important point after buying a device AB Soft XS 25000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AB Soft XS 25000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AB Soft XS 25000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AB Soft XS 25000 you will learn all the available features of the product, as well as information on its operation. The information that you get AB Soft XS 25000 will certainly help you make a decision on the purchase.
If you already are a holder of AB Soft XS 25000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AB Soft XS 25000.
However, one of the most important roles played by the user manual is to help in solving problems with AB Soft XS 25000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AB Soft XS 25000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
