Instruction/ maintenance manual of the product FD2548 Land Pride
Go to page of 30
1/29/04 0 FD2548 2-Spindle Grooming Mower 10817 310-156M Operator’s Manual 1/29/04 Cov er photo ma y show optional equipment not supplied with standard unit. © Cop yright 2004 Pr inted Read the Operator’ s man ual entirely . When you see this symbol, the subsequent instructions and warnings are serious - follow without e xception.
1/29/04 1 This manual has been prepared to instruct you in the safe and efficient operation of your 25 Series Grooming Mower. Read and follow all instructions and safety pre- cautions carefully. The parts on your 25 Series Grooming Mower have been specially designed and should only be replaced with genuine Land Pride parts.
1/29/04 2 SAFETY RULES Most accidents are the result of negligence and carelessness, usually caused by failure of the operator to follow simple but necessary safety precautions. The following safety precautions are suggested to help prevent such accidents.
1/29/04 3 SAFETY RULES (CON’T .) SAFETY DECALS --IMPORTANT-- * Your Grooming Mower comes equipped with all safety decals in place. * Always keep safety decals clean and legible. * Replace all damaged or missing safety decals. To order new safety decals go to your Land Pride Dealer and reference part numbers as shown on page 27.
1/29/04 4 NUT & BOL T T ORQUING CHAR T This chart is based on torque requirements in foot pounds for grade 5 bolts. BOLT DIAMETER MINIMUM TORQUE MAXIMUM TORQUE BOLT DIAMETER MINIMUM TORQUE MAXIMUM.
1/29/04 5 1. Be certain that tractor draw bar will not interfere. Move draw bar ahead or remove if required. Draw bar should also be checked for clearance when unit is being raised for the first time. 2. Align lower link arms of tractor to hitch clevises on mower.
1/29/04 6 LEVELING THE MO WER THREE AND FOUR GA UGE WHEELS FRONT TO REAR: NOTE: Tractor and mower should be on level ground. 1. Set the lower hitches and upper floating hitch as shown in fig. 1 on page 5. 2. Start tractor and raise mower, watching that tractor draw bar (if not removed) does not interfere with mower.
1/29/04 7 1. Using the tractor, raise the mower off the ground and support under it with secure blocking so not to let the mower drift down during maintenance. 2. Holding wheel and yoke assembly up, remove quick- lock pin from top of gauge wheel spindle.
1/29/04 8 OPERA TING INSTRUCTIONS BEFORE beginning to mow, the following inspection should be performed: Proper servicing and adjustments is the key to the long life of any machine. With careful and systematic inspec- tion of the mower, you can avoid costly maintenance, time and repair.
1/29/04 9 V-BELT INSTALLATION - 1. Remove belt covers. 2. Move belt take-up handle in a clockwise direction to relieve tension on belt. 3. With tension relieved from belt remove old belt from pulleys. 4. Install new belt referring to the figure below (also re- fer to the decal on top of mower deck).
1/29/04 10 At the end of the working season or when the mower will not be used for a long period, it is good practice to clean off any dirt or grease that may have accumulated. Check the blades for wear and replace if necessary. See "Maintenance" on page 9.
1/29/04 11 OPTIONS (CON’T .) MO WER CHAIN KIT ASSEMBL Y INSTRUCTIONS Remove tractor 3-point hitch upper link pin (#1). Install lift chains (#2) on outside surface of upper link mounting plate on tractor. Reinstall link pin and keeper. NOTE: Depending upon brand of tractor the link pin may need to be replaced with a longer pin or a bolt.
1/29/04 12 PROBLEM CAUSE SOLUTION 1. Discharge chute plugged Belt not installed correctly Check installation of belt Grass too wet Wait until grass dries Grass too tall Raise cutting height of mower a.
1/29/04 13 W ARRANTY Land Pride warrants to the original purchaser of new Land Pride Products, that they are free of defects in material and workmanship.
1/29/04 14 FLA T DECK MO WER - DECK & COMPONENTS 10467.
1/29/04 15 FLA T DECK MO WER - DECK & COMPONENTS (CON’T .) Ref. Part No. Description 1. 310-046H 48" Mower Deck 2. 310-071H Lower Hitch Lug 3. 310-020S Lower Hitch Pin 4. 805-141C Pin, Lock 5/8" x 2" Long {2 Wheel Units Only} 5. 805-140C Pin, Pivot 3/4" x 2" Long 6.
1/29/04 16 FLA T DECK MO WER BEL T DRIVE 18642.
1/29/04 17 FLA T DECK MO WER BEL T DRIVE (CON’T .) Ref. Part No. Description 1. 826-011C Gearbox - Comer 826-081C Gearbox - IEG 2. 802-207C Bolt 5/8"-18 x 1 1/2" Long 3. 804-022C Washer, Lock 5/8" 4. 803-022C Nut 5/8"-18 5. 817-050C Shaft Protector 6.
1/29/04 18 COMER GEARBO X (P ART NO . 826-011C) 10508.
1/29/04 19 COMER GEARBO X (CON’T .) (P ART NO . 826-011C) Ref. Part No. Description 1. 0.141.0330.00 Casting - Machined 2. 8.4.1.00889 Key, parallel B 10 x 8 x 30 3. 8.0.1.00870 Bearing 6207 4. 8.7.0.00693 Cap 5. 0.141.2100.00 Shaft 1 3/8" 6. 0.
1/29/04 20 IEG GEARBO X (P ART NO . 826-081C) 10891.
1/29/04 21 IEG GEARBO X (CON’T .) (P ART NO . 826-081C) Ref. Part No. Description 1. 18-021 Housing 2. 04-004 Ball Bearing #207 3. 09-002 Plug, Pipe 1/2"-14 4. 02-035 Input Shaft 5. 21-012 Retaining Ring 6. 03-036 Input Gear 30 Tooth 7. 08-004A Gasket, Input Cap 0.
1/29/04 22 GA UGE WHEEL ASSEMBL Y 18643.
1/29/04 23 GA UGE WHEEL ASSEMBL Y (CON’T .) Ref. Part No. Description 1. 310-014H Gauge Wheel Arm Weldment 2. 827-002C Spacer 1" 3. 817-048C Bushing, Spindle 4. 827-001C Spacer 1/2" 5. 805-065C Pin, Wire Retaining 1/4" x 1 3/4" Long 6.
1/29/04 24 PO WER T AKE-OFF (P ART NO . 826-012C) Ref. Part No. Description 1. 380905 End Yoke 2. 381908 Quick Disconnect Yoke 3. 044439 Cross & Bearing Kit 4. 041065 Inboard Yoke 5. 020614 Spring Pin 6. 054484 Inner Profile 7. 377234 Shield Cone - 4 Rib 8.
1/29/04 25 OPTIONS FR ONT ANTI-SCALPING ROLLER (P ART NO . 310-077S) Ref. Part No. Description 1. 817-049C 4" x 10" Roller 2. 310-076H Left Hand Mount Bracket 3. 310-190D Right Hand Mount Bracket 4. 803-114C Nut, Lock 3/4"-16 Nylock Collar 5.
1/29/04 26 OPTIONS CHAIN KIT (P ART NO . 310-038S) Ref. Part No. Description 1. 310-117D Chain Bracket - Lower 2. 310-032H Lift Chain 3. 817-057C Cap Plug.
1/29/04 27 DECAL PLA CEMENT Ref. Part No. Description 310-086A FD/A T SAFETY DECAL P ACKA GE Complete safety decal pac kage 310-079A FD/A T2548 DECAL P ACKA GE Complete decal pac kage 1. 818-165C LP LOGO SMALL BUCKSKIN 2. 818-552C DECAL D ANGER PT O DRIVELINE 3.
1/29/04 28 NOTES.
Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com.
An important point after buying a device Land Pride FD2548 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Land Pride FD2548 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Land Pride FD2548 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Land Pride FD2548 you will learn all the available features of the product, as well as information on its operation. The information that you get Land Pride FD2548 will certainly help you make a decision on the purchase.
If you already are a holder of Land Pride FD2548, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Land Pride FD2548.
However, one of the most important roles played by the user manual is to help in solving problems with Land Pride FD2548. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Land Pride FD2548 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center