Instruction/ maintenance manual of the product WT-5431 La Crosse Technology
Go to page of 18
WT-5431 433 MHz Radio Controlled Projection Alarm Instruction Manual.
2 TABLE OF CONTENTS Topic Page Inventory of Conte nts/ Addi tional Equi pment 3 About WW VB 3 Quick Set-U p Guide 4 Detailed Set-Up Guide Battery Installation 5-6 Program Mode Programming Sequence 6 F.
3 INVENTORY OF CO NTENTS 1) WT-5431 Al ar m Clock 2) TX6U Remote temperature sensor 3) AC adapter/transformer (6V) 4) Instructi on manual a nd warranty card. ADDITIONAL EQUIPME NT (not included) 1) Three fres h 1.5V AA bat teries (optio nal for alarm clock) 2) Two fresh 1.
4 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteri es and avoid rec hargeable batteries. 1. Have the indoor station and outdoor remote 3 to 5 ap art. 2. Batteries shoul d be out of both unit s fo r 1 0 m i nut es. 3. Place the batteries into the outdoor remote first then into the indoor station.
5 B attery Cover DETAILED SET-UP GUIDE Important: Insert batteries into the sensor first, then into the alarm clock. Do not press any buttons until remot e temperature is displayed. II. BATTERY INSTALLATION A. REMOTE TEMPERATURE SENSOR 1. Remove the battery cove r.
6 is found during this period , the tower icon will no t appear and the clock will search again at 12:00 am t he next night. 6. Either wait for the WWVB reception or manually set the time and date, making sure to set the correct time zone.
7 3. From –5h to –8h, a US map with the highlighted time zone will also be displayed to the right of the time display. 4. Press and release the “ SET” button to confirm the time zone setting, and to advance to DS T (Daylight sa ving time) set ting.
8 2. Press and release the “ SET” button to confirm the hour setting, and to shift to select the minutes. 3. Press and release the “+” butto n to select the minutes. 4. Press and release the “ SET” button to confirm the time setting, and to advance to manually set the date.
9 IV. FEATURES & OPERATIONS A. FEATURES 1. Radio-co ntrolled tim e and date 2. Projection of time and/or remote temperature 3. EL backlig ht 4. Six modes of date/secon ds/temperature dis play 5. Indoor temperature 6. Remote outdoor tem perature 7.
10 C. PROJECTION OF TIME AND/OR REMOTE TEMPERATURE 1. When plugged in to an AC outlet, th e projection alarm can continuously project the time and/or remote temperature. 2. When operating on batteries alon e, the projection alarm will on ly proj ect when a button is pressed.
11 defect, but simply reflects the differen ce in measuring m ethods. The remote temper ature is designed for chang i ng temperature at a wide range . F. REMOTE TEMPERATURE 1. The projection alarm comes with a remo te tem perature sensor. When set up properly, the projectio n alarm will receive and display the remote temperature.
12 2. ACTIVATING/DEA CTIVATING THE ALARM a. After entering the alarm setting mode, th e alarm is activate d (either ALM1 or AL M2). b. To toggle between activating and d eactivating the alarm, press either the ALM1 or ALM2 briefl y. “(((1)))” or “(((2)))” will be disp layed to the right of the time display when the alarm is activated.
13 V. MOUNTING THE REMOTE TEMPER ATURE SENSOR The Remote Tem perature Sensor can be mounted i n two ways: 1) with the use of screws, or 2) using the adhesive tape. A. MOUNTING WITH SC REWS 1. Remove the mounting brac ket from the Remote Temperatur e Sensor.
14 VI. MAINTENANCE & C ARE A. Extreme t emperatures, vibrations, a nd shock sh ould be av oided to preve nt damage to the units. B. Clean displays an d units with a soft, da mp cloth. Do not use sol vents or scouring agen ts—th ey may mark and damage the displays and casing s.
15 TROUBLESHOOTING Problem: The Projection is faint Solution: 1) Change inten sity setting 2) Use AC ada pter 3) Darken surroundings 4) Use fresh ba tteries (if AC is not used ) Problem: The LCD is faint. Solution: 1) Replace the batteries. Problem: “OFL” appears in the indoor t emperature LCD.
16 SPECIFICATIONS FOR WT-5 431 Temperature: Measuring range: 32 ° F to 122 ° F with 0.1 ° F resolution (indoor) -21.8 ° F to 140 ° F with 0.1 ° F resolution (outdoor) (0 ° C to 50 ° C with 0.1 ° C reso lution) Checking intervals: Every 10 seconds indoor, 3 times in 10 minutes for remote temperature.
17 W AR R ANT Y IN F OR M AT I ON La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this produc t.
18 La Crosse Technology 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.1020 e-mail: support@lacrossetechnology.com (warranty work) sales@lacrossetechnology.com (information on other products) web: www.lacrossetechnology.com FCC ID: OMO-01RX (receiver) OMO-01T X (sensor ) THIS DEVICE COMPLIE S WITH PART 15 OF THE FCC RULES.
An important point after buying a device La Crosse Technology WT-5431 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought La Crosse Technology WT-5431 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data La Crosse Technology WT-5431 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, La Crosse Technology WT-5431 you will learn all the available features of the product, as well as information on its operation. The information that you get La Crosse Technology WT-5431 will certainly help you make a decision on the purchase.
If you already are a holder of La Crosse Technology WT-5431, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime La Crosse Technology WT-5431.
However, one of the most important roles played by the user manual is to help in solving problems with La Crosse Technology WT-5431. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device La Crosse Technology WT-5431 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
