Instruction/ maintenance manual of the product WT-5360U La Crosse Technology
Go to page of 13
WT-5360U 433 MHz Radio Controlled Alarm Clock With Projection Time Instruction Manual.
2 TABL E OF CONT ENTS Topic Page Inventory of Contents/ Additional Equipment 3 Glossary of Common Terms 3 QUICK SET-UP GUIDE 4 DETAILED SET-UP GUIDE Battery Installation 5 PROG RAM MO DE Programming S.
3 INVENTORY OF CONTENTS 1. WT-5360 Alarm Clock 2. AC adapter/transformer 3. Instruction manual and warranty card. ADDITION AL EQUIPMENT (not included) Two fresh 1.5V AA alkaline batteries (optional when using AC adapter) FEATURES OF PROJECTION ALARM CLOCK Operation of these fea tures is in section III.
4 I. QUICK SET-UP GUID E Hint: Use good quality alkaline batter ies and avoid rechargea ble batteries. 1. We recommend beginning the set-up procedure at night whe n the WWVB signal is easiest to receive.
5 II. DETAILED SET-UP GUIDE A. BATTERY INSTALLATION 1. Remove the battery cover on the backside of the projection alarm. 2. Observe the correct polarity, and install 2 AA batteries. 3. In addition to or instead of installing batteries, the AC adapter can be used.
6 III. PROG RAM MO DE To enter the Program Mode, hold down the “MODE/MIN” button for 3 seconds, until the time zone flashes at the bottom of the display. The Program Mode Guide is laid out in a manne r that allows you to program each function separately, or you can follow the instructions entirely to progra m the projection alarm.
7 4. NOTE: The U.S. time zones will show abbr eviations as opposed to the numerical time zone indicator. For example Eastern Time will display “ET” when the Eastern Time Zone is selected 5. Press and release the “SNOOZE” bar to confirm the time zone setting and advance t o the Manual Time Setting.
8 F. 12/24-HOUR CLOCK SETTIN G 1. Hold down the “MODE/MIN” button for 3 seconds; the time zone will appear flashing at the bottom of the LCD. 2. Press and release the “SNOOZE” bar 5 times to ad vance to the 12/24-hour clock setting. 3. Press and release the “MODE/MIN” button to select either a 12-hour clock or a 24- hour clock.
9 3. When the time signal has been received successfully, the tower icon will remain steady until midnight. 4. The projection alarm will search for a si gnal every night when reception is best. 5. It is possible that your projection alarm may not be exactly on the se cond due to the variance in the quartz.
10 c. To disable the alarm for 24 hours, press and release an y button other than the “SNOOZE” bar or display direction buttons. NOTE: The alarm will sound in a 3-step crescendo for 80 seconds if the “SNOOZE” bar is not pressed. 4. VIEWING TIME ALARM a.
11 2) Wait overnight for signal. 3) Be sure the projection alarm is at least 6 feet from any electrical devices, i.e. TV sets, computers, or other radio controlled clocks. 4) Remove batteries for five minutes, reinsert and leave the unit alone overnight without pressing buttons.
12 authorized service center. La Crosse Technology, Ltd will pay ground return shipping charges to the owner of the product to a USA address only. Your La Crosse Technology, Ltd warranty covers a ll d.
13 FCC DISCLAIMER This device complies with part 15 of the FCC rules. Operation is subject to the follo wing two conditions: (1) this device may not cause harmful interference, an d (2 ) this device must accept any interference received, including interfer ence that may cause undesired operation.
An important point after buying a device La Crosse Technology WT-5360U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought La Crosse Technology WT-5360U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data La Crosse Technology WT-5360U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, La Crosse Technology WT-5360U you will learn all the available features of the product, as well as information on its operation. The information that you get La Crosse Technology WT-5360U will certainly help you make a decision on the purchase.
If you already are a holder of La Crosse Technology WT-5360U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime La Crosse Technology WT-5360U.
However, one of the most important roles played by the user manual is to help in solving problems with La Crosse Technology WT-5360U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device La Crosse Technology WT-5360U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
