Instruction/ maintenance manual of the product WS-9075U La Crosse Technology
Go to page of 18
WS-9075U Wireless 433 MHz Radio-controlled Weather Station Instruction Manual.
2 TABLE OF CONTENTS Topic Page Inventory of Contents/Addition al Equipment 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery installation 5 Program Mode Program Sequence and Default Se.
3 INVENTORY OF CONTENTS 1. The WS-9075U weather station (Figure 1) 2. One TX6U remote temperature sensor (Figure 2) 3. Mounting hardware 4. Instruction manual and warranty card. *LCD (Liquid Crystal Display) ADDITIONAL EQUIPMENT (not included) 1. Three fresh AA 1.
4 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batte ries and avoid rechargeable batteries. 1. Have the indoor weather station and remote temperature sen sor 3 to 5 feet apart. 2. Batteries should be out of both the indoor weather st ation and remote temperat ure sensor units for 10 minutes.
5 DETAILED SET-UP GUIDE BATTERY INSTALLATION A. REMOTE TEMPERATURE SENSOR 1. Remove the mounting bracket. The bracket snaps on and off easily. 2. Remove the battery cover, by sliding the cover down. 3. Observing the correct polarity insta ll 2 AA batteries.
6 PROGRAM MODE Programming Note: If 15 seconds are allowed to pass, or the CHANNEL button is pressed during the programming mode, the unit will conf irm/set the last inform ation entered—the display will stop flashing and return to normal time-date readings.
7 III. TIME ZONE SETTING 1. The time zone will flash in the DATE LCD. 2. Press and release the MIN/MAX/+ or ALARM/- button to select your tim e zone. Note: It is possible to select any time zone from –12 GMT to +12 GMT (for exam ple to see the time in another country).
8 V. RADIO-CONTROLLED TIME ON/OFF SETTING 1. “RCC” will appear in the DATE LCD and “ON” or “OFF” will flash in the TIME LCD. 2. Press and release the MIN/MAX/+ or the ALARM/- key to select radio-controlled time on or off. 3. Press and release the SET button to confirm and advance to the 12/24-hour time setting.
9 3. Press and release the SET button to confirm the hours setting and advance to the minutes setting. 4. The minutes digits will flash in the TIME LCD. 5. Press and release the MIN/MAX/+ button to adv ance or the ALARM/- key to decrease the minutes. 6.
10 XI. SETTING THE ANIMATION (FORECAST ICONS AND STARS) 1. “ON” or “OFF” will flash in the TIME LCD. If “ON” the forecast icon and tendency arrows will flash in the FORECAST LCD and the st ars will flash in the MOON PHASE LCD. If “OFF”, the forecast icon, tendency arrows, and stars will not flash.
11 I. WEATHER FORECAST The weather forecasting feature is estimated to be 75% accurate and is for the next 12 to 24 hours. The weather forecast is based solely upon the change of air pressure over time.
12 IV. MINIMUM AND MAXIMUM TEMPERATURE AND HUMIDITY RECORDS The WS-9075U keeps a record of the MINIMU M a nd MAXIMUM and date of their occurrence, for both the indoor and outdoor modes. A. VIEWING THE OUTDOOR TEMPERATURE RECORDS 1. Press and release the MIN/MAX/+ button once.
13 V. OUTDOOR CHANNEL RE-LEARN MODE In case the temperature data in a particular outd oor channel often shows “--.-“ due to low battery level or false reset of a transmitter, that transmitter can be set up again individua lly and the “lost” channel can be re-learned again by entering the channel re-learn mode.
14 VII. ADDING REMOTE TEMPERATURE SENSORS (OPTIONAL) The WS-9075U is able to receive signals fr om 3 different remote tem perature sensors. The remote temperature sensor model(s) that you choose will com e with their own set of instructions—follow these instructions for a complete guide to s etting up.
15 MOUNTING Note: Before permanently mounting ensure that the indoor w eather station is able to receive WWVB signals from the desired location. Also, extrem e and sudden changes in temperature will d.
16 B. FOLDOUT TABLE STAND: The foldout table stand leg is located on the backside. 1) Pull the stand out from the bottom center edge of the weather station, below the battery compartm ent. 2) Once the foldout table stand is extended, place the weather station in an appropriate location.
17 MAINTENANCE AND CARE INSTRUCTIONS • Extreme temperatures, vibration, and shock should be avoided to prevent damage to the units. • Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings.
18 Your La Crosse Technolog y, Ltd warranty covers all defects in mate rial and workmanship with the follo wing spec ified exceptions: (1) damage caused by accident, unreason ab le use or neglect (inc.
An important point after buying a device La Crosse Technology WS-9075U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought La Crosse Technology WS-9075U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data La Crosse Technology WS-9075U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, La Crosse Technology WS-9075U you will learn all the available features of the product, as well as information on its operation. The information that you get La Crosse Technology WS-9075U will certainly help you make a decision on the purchase.
If you already are a holder of La Crosse Technology WS-9075U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime La Crosse Technology WS-9075U.
However, one of the most important roles played by the user manual is to help in solving problems with La Crosse Technology WS-9075U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device La Crosse Technology WS-9075U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
