Instruction/ maintenance manual of the product WS-9057U La Crosse Technology
Go to page of 12
1 Weather Station Model WS-9057U Instruct ion Man ua l INSTANT TRANSMISSION is the state-o f - the-art new wireless transmissi on technology, exclusively designed and developed by L A CROSSE TECHNOLOGY.
5 SETUP WHEN ONE TRANSMITTER IS USED 1. First, insert the ba tteries in the trans mitter (see “ How to install and replace batteries in the Thermo-hygro outdoor transmitter ” on page 11).
9 When the weather station is receiving the WWVB time signal, the outdoor transmitter data signal will temporarily not be receiv ed by the weather station. During this short period of time, the outdoor readings shown on the weather station will not be renew ed until the WWVB time signal is successf ully recei ved.
13 will sound for every seco nd. It is possible that your wireless w eather station may not be exactly on the second due to the variance in the quartz. However, the clock will adjust the quartz timing over the course of several days to be very accu rate; under 0.
17 * When the signal is successfully received by t he Weather Station, the outdoor transmission icon will be switched on. I f not successful, the icon will no t be shown on LC D. The user can the n easily see whe ther the last reception was successful (icon on) or not (icon off).
21 12/24-HOUR FORMA T SETTING: The hour display can be selecte d to show hours in 12-hour or 24-hour settings. (Default 12-Hour) 1. Use the OU T/+ key to toggl e between “12H” or “2 4H”. 2. Confirm with the SET key and enter the Manual time setting .
25 2. Confirm with the SET key and enter the Relative air pre ssur e value s etting . Note : Units of weather icon sensitivity and air pressure history are not affected. They are always expressed in hPa. RELATIVE A IR PRESSURE VALUE SET TING The default relative pressure value is 29.
29 INDO OR RELA TIV E HUM IDI TY A ND INDO OR TEMP ER ATU RE: The indoor temperature and hum idity data and the indoor comfort indicator are automatically update d and displayed on the second section of the LCD.
33 If the Weather stati on is moved to another location significantly higher or lower than its initi al standing point (fo r example from the ground floor to the upper floors of a h ouse), discard the w eather foreca st for the nex t 48- 60 hours.
37 2. Use OUT/+ key to view the MIN/MAX temperature and humidity data for the sele cted transmitter. 3. To reset the minimum and maximum temperatur e and humidity data, and the times at which they were recorded , press the SET key continuously for abou t 3 seconds.
41 2. Clip the remote temperature transmitt er onto the bracket. Note : The mounti ng surface can affect th e transm ission range. If, for instance, the unit is attached t o a piece of metal, it ma y then either reduce or increase the transmittin g range.
45 parts or products if found to be defectiv e during the limited warranty period specifie d above. All replaced parts and produc ts become the property of La Crosse Technology , Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty , or ninety (90) days, whichever is longer.
An important point after buying a device La Crosse Technology WS-9057U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought La Crosse Technology WS-9057U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data La Crosse Technology WS-9057U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, La Crosse Technology WS-9057U you will learn all the available features of the product, as well as information on its operation. The information that you get La Crosse Technology WS-9057U will certainly help you make a decision on the purchase.
If you already are a holder of La Crosse Technology WS-9057U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime La Crosse Technology WS-9057U.
However, one of the most important roles played by the user manual is to help in solving problems with La Crosse Technology WS-9057U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device La Crosse Technology WS-9057U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
