Instruction/ maintenance manual of the product WS-9035TWC La Crosse Technology
Go to page of 19
WS-9035TWC Wireless 433 MHz Radio-controlled Weather Station Instruction Manual.
2 TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipm ent 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery installation 5 Program Mode Program Sequence and Default S.
3 INVENTORY OF CONTENTS 1. The WS-9035U weather station (Figure 1). 2. One TX8U remote tem perature/hum idity sensor (Figure 2). 3. One TX15U wind speed sensor (Figure 3). 4. Mounting hardware 5. Instruction m anual and warranty card. ADDITIONAL EQUIPMENT (not included) 1.
4 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station, rem ote tem perature/humi dity sensor and wind speed sensor 3 to 5 feet apart . 2. Insert the telephone plug (RJ-11) from the wind speed sensor into the receptacle on the remote tem perature/humidity sensor.
5 1. Remove the battery cover. To do this, insert a solid object in the space provided at the lower-central position of the battery cover, then push up and pul l out on the battery cover. 2. Observe the correct polarity, and install 3 AA b a tteries. 3.
6 III. SETTING THE LCD CONTRAST 1. Press and hold the SET button for 5 seconds. 2. “LCD” will show in th e TIME LCD and the number setting will flash . Note: There are 8 LCD contrast levels to choose from—“Lcd 0” is the lightest, and “Lcd 7” is the darkest.
7 2. “LCD” will show in th e TIME LCD and the number setting will flash . 3. Press and release the SET button three times. 4. “RCC” will appear in the DA TE LCD and “ON” or “OFF” will flash in the TIME LCD. 5. Press and release the ALM/+ button to select radi o-controlled ti me on or off.
8 IX. SETTING THE YEAR, DAY AND MONTH Note: Reception of the WWVB signal will al so set the date and day. The recep tion of the signal will override any programm ed date and day. 1. Press and hold the SET button for 5 seconds. 2. “LCD” will show in th e TIME LCD and the number setting will flash .
9 4. Either “1”, “2” or “3” w ill flash in the TIME LCD and the forecast icon and tendency arrows will flash in the FORECAST LCD. 5. Press and release the ALM/+ button to select the forecast sensitivity 6. Press and release the SET button to confirm the forecast sens itivity and com plete the programming.
10 Sunny —indicates that the weather is exp ected to improve (not that the weather w ill b e sunny). Sun with Clouds —indicates that the weather is expected to b e fair (not that the weather will be sun ny with clouds). Clouds with Rain —indicates that the weather is expected to get worse (not that the weath er w ill be rainy).
11 2. Press and release the OUT/MIN button again (once while “MAX” is still d isplayed, twice otherwise). “MIN” appears to the right of the outdoor tem perature, indicati ng that the mi nimum t emperature and the time and date of occurrence are displayed.
12 1. Press and hold the SET button for 5 seconds. 2. The record will now b e reset and show the current time in the TIME LCD an d dew point reading in th e OUTDOOR LCD. To return to the outdoor tem perature/hum idity viewing m ode: 1. Press and hold the OUT/MIN but ton for 5 seconds.
13 Wind Speed Beaufort Number or Force mph km/hr knots Description Effects Land / Sea 0 <1 <1 <1 Calm Still, calm air, smoke will rise vertically . Water is mirror-like. 1 1-3 mph 1-5 kph 1-3 knots Light Air Rising smoke drifts, wind vane is inactive.
14 9 47-54 mph 75-88 kph 41-47 knots Strong Gale Slight damage occurs to buildings, shingles are blown off of roofs. High waves (6 meters), rolling seas, dense foam, Blowing spray reduces visibility. 10 55-63 mph 89-102 kph 48-55 knots Whole Gale or Storm Trees are broken or uprooted, building damage is considerable.
15 MOUNTING Note: Before permanently mounting ensure that the indoor weather station is able to receive WWVB signals from the desired location. Also, extreme and sudde n changes in temperature w ill d.
16 II. THE REMOTE WIND SPEED SENSOR The remote wind speed sensor can be m ounted two ways: • With the use o f screws • Using nylon straps A. MOUNTING WITH SCREWS 1) Unlock the mounti ng bracket from the rem ote wind speed sensor leaving t he wire going through the bracket.
17 5) Place the remote temperature/hum idity sensor and indoor weather st ation in position so the stra ight-line signal is not passing through more than t wo or three walls.
18 SPECIFICATIONS Weather data measuring range: Indoor: 14.2 ° F to 139.8 ° F with 0.1 ° F resolution (0 ° C to 59.9 ° C w ith 0.1 ° C resolution) “OFL” displayed if out side this range Outdoor and dew point: -21.8 ° F to 157.8 ° F with 0.
19 WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this weathe r stat ion. Contact La Crosse Technology i mmedi ately upon discovery of any defects covered by t his warranty. Before sending the W eather Station in for repairs, contact La Crosse Tech nology.
An important point after buying a device La Crosse Technology WS-9035TWC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought La Crosse Technology WS-9035TWC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data La Crosse Technology WS-9035TWC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, La Crosse Technology WS-9035TWC you will learn all the available features of the product, as well as information on its operation. The information that you get La Crosse Technology WS-9035TWC will certainly help you make a decision on the purchase.
If you already are a holder of La Crosse Technology WS-9035TWC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime La Crosse Technology WS-9035TWC.
However, one of the most important roles played by the user manual is to help in solving problems with La Crosse Technology WS-9035TWC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device La Crosse Technology WS-9035TWC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
