Instruction/ maintenance manual of the product WS-9023U La Crosse Technology
Go to page of 11
1 WS-9023U 915 MHz Wireless Weather Station Instruction Manual.
2 TABLE OF CONTENTS Introduction……………………………………………………………………………………..3 Inventory of Contents……………………………………….
3 12 or 24 Hour Time Display Indoor Temperature (°F or °C) Connection w/ Sensor Icon Set/Channel Button Outdoor Temperature (°F or °C) Outdoor Humidity (%RH) Minimum/Maximum Temperature & Humi.
4 INVENTORY OF CONTENTS 1. Wireless Weather Station (Figure 1) 2. Wireless Thermo-Hygro Sensor (TX21U) and mounting bracket. (Figure 2) 3. 3 each, 1/2” Philips screws. 4. One strip of doubl e sided adhesive tape. 5. Instruction Manual and Warranty Card.
5 indoor temperature and the time as 12:00 will be displayed. If they are not shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. Once the indoor da ta is displayed user may proceed to the next step.
6 * When the signal is successfully received by the Weather Station, the icon will be switched on. (If not successful , the icon will not be shown in LCD) So the user can easily see whether the last reception was succe ssful (icon on) or not (icon off).
7 1. Remove all the batteries from the receiver and sensor(s) and wait 60 seconds. During these 60 seconds, press any button 20 times to discharge any excess power. 2. Insert the batteries to t he first Thermo-hygro sensor. 3. Within 2 minutes of powering up the fi rst sensor, insert the batteries to the Weather Station.
8 III. MOUNTING Note: To achieve a true temperature reading, avoid mounting in direct sunlight. We recommend that you mount the thermo-hygro sensor on an outside North-facing wall (under the eve of a house is ideal). The sending range is 330 feet; obstacles such as walls, stucco walls, concrete, and large meta l objects will reduce the range.
9 7) During the course of the 15 minu tes an outdoor temperature should appear on the display. You can now put your sensor(s) back outside. MAINTENANCE AND CAR E INSTRUCTIONS • Extreme temperatures, vibr ation, and shock should be avoi ded to prevent damage to the units.
10 Battery life Up to 24 Months WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-y ear limited warranty on this product against manufacturing defects in materials and workmanship.
11 LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHE R SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF TH IS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION.
An important point after buying a device La Crosse Technology WS-9023U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought La Crosse Technology WS-9023U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data La Crosse Technology WS-9023U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, La Crosse Technology WS-9023U you will learn all the available features of the product, as well as information on its operation. The information that you get La Crosse Technology WS-9023U will certainly help you make a decision on the purchase.
If you already are a holder of La Crosse Technology WS-9023U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime La Crosse Technology WS-9023U.
However, one of the most important roles played by the user manual is to help in solving problems with La Crosse Technology WS-9023U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device La Crosse Technology WS-9023U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
