Instruction/ maintenance manual of the product WS-8120U-IT La Crosse Technology
Go to page of 9
1 Model WS- 8120 U- IT Solar Powered Wireless Temperature Sta tion INSTRUCTION MANUAL Model TX62U-IT/Solar-po wered Transmitter (Sensor): LC D shows temperature r eadings Transmits outdoor tempera ture to indoor receiver using 915 MHz signals 200 FT.
2 BATTERY COMPARTMENT INITIAL SETUP (USING INCLUDED S OLAR RECHARGEABLE BATTERIES FROM THE FACTORY) 1. Open battery compartme nt on the back of the Weather Station and make sure that the battery switch under the battery compart ment is to the left. If it is not, please slide the switc h to the left before proceeding.
3 SOLAR-POWERED TRANSMITTER OPERATION MODES (1) NORMAL MODE: NORMAL MODE occurs when t he battery voltage is 2.5V or greater. It measures and transmits t emperature data to the indoor receiver every 8 seconds. It checks the brightness level of the surrounding environment every 5 seconds.
4 PROGRAM MENU: SET THE TIME: Press an d hold the SET button for 3 seconds to enter t he time setting mode. HOUR : The Hour digits will flash. Press and release the PLUS button to set the Hour. Press and release the SET button once. MINUTES : The Minute digits will flash.
5 DISPLAY MODES: Press and release the SET butt on to view different display modes: Outdoor temperature in the first line o n the left side and outdoor minimum in the second line on the left side .
6 WALL MOUNTING 1. Install a mounting screw (not included) into a wall — leaving approximately 3/16 of an inch (5mm) extended from the wall. 2. Place the Weather Station onto the screw, using the hanging hole on the backsi de. Gently pull the Weather Station do wn to lock the screw into place.
7 Note : For best performance, standard alkaline batteries should be replaced at least once every 2 years to maintain the best running accur acy. Ensure that the batteries used are new and the corre ct size. Please help in the preserv ation of the environment and return used batteries to an authorized depot.
8 SPECIFICATIONS: Indoor Temperature Range: 15.8 F to 139.8 F Indoor Humidity Range: 20% - 95% Outdoor Temperature Ran ge: -39.2 F to 139.8F Transmission Range: 200 Feet (open air, no obstructions) Po.
9 This warranty gives you specific le gal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of consequential or incidental damages therefo re the above exclusion of limitation may not apply to you. For warranty work, technical sup port, or information contact: La Crosse Technology 2817 Losey Blvd.
An important point after buying a device La Crosse Technology WS-8120U-IT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought La Crosse Technology WS-8120U-IT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data La Crosse Technology WS-8120U-IT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, La Crosse Technology WS-8120U-IT you will learn all the available features of the product, as well as information on its operation. The information that you get La Crosse Technology WS-8120U-IT will certainly help you make a decision on the purchase.
If you already are a holder of La Crosse Technology WS-8120U-IT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime La Crosse Technology WS-8120U-IT.
However, one of the most important roles played by the user manual is to help in solving problems with La Crosse Technology WS-8120U-IT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device La Crosse Technology WS-8120U-IT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
