Instruction/ maintenance manual of the product WS-7212U La Crosse Technology
Go to page of 7
WS-7212U Wireless 433 MHz Weather Station Instruction Manual INVENTORY OF CONTENTS 1. Two indoor weather stations (Figure 1) 2. The remote temperature/humidity sensor (TX4U) and mounting bracket. (Figure 2) 3. Mounting hardware. 4. Instruction Manual and Warranty Card.
After both indoor temperature and outdoor temperature and humidity are displayed for 10 minutes you can place your remote temp/humidity sensor outdoors and set your time. Notes on Outdoor Sensor Placement The remote temp/humidity sensor should be placed in a dry, shaded area.
SETTING THE TIME 6. Press and hold the “ SET” button for 5 seconds. 7. The hour will begin to flash. 8. Press and releas e the “ +” button to advance the hour to your desired hour. 9. Press and releas e the “SET” button to move to the minute setting.
D. VIEWING AND OPERATING WITH MULTIPLE REMOTE SENSOR UNITS 1. To view the temperature of a different re mote sensor unit, press and release the “CH” button.
Problem: Temperatures do not match if units are placed next to each other. Solution: Each temp/humidity sensor is manufactured to be accurate to within 2 degree plus or minus and under normal conditions. It is possible for two temp/humidity sensors to be as much as 4 degrees different.
MAINTENANCE AND CARE INSTRUCTIONS • Extreme temperatures, vibration, and shock shoul d be avoided to prevent damage to the units. • Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings.
WARRANTY INFORMATION La Crosse Technology provides a 1-y ear warranty on this weat her station. Contact L a Cr osse Technology im mediately upon discovery of any defects covered by this war ranty. Before sending the weather station in for re pairs, contact La Crosse T echnology.
An important point after buying a device La Crosse Technology WS-7212U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought La Crosse Technology WS-7212U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data La Crosse Technology WS-7212U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, La Crosse Technology WS-7212U you will learn all the available features of the product, as well as information on its operation. The information that you get La Crosse Technology WS-7212U will certainly help you make a decision on the purchase.
If you already are a holder of La Crosse Technology WS-7212U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime La Crosse Technology WS-7212U.
However, one of the most important roles played by the user manual is to help in solving problems with La Crosse Technology WS-7212U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device La Crosse Technology WS-7212U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
