Instruction/ maintenance manual of the product WS-6003U La Crosse Technology
Go to page of 11
WS-6003U Atomic Clock Instruction Manual .
2 TABLE OF CONTENTS Topic Page Inventory of Conte nts/ Addi tional Equi pment 3 About WW VB 3 Quick Set-U p Guide 3 Detailed Set-Up Guide Battery Installation 4 Program Mode Function Buttons 5 Time Zo.
3 INVENTORY OF CO NTENTS 1) WS-6003U 2) Instructi on manual a nd warranty card. ADDITIONAL EQUIPME NT (not included) 1) Two fresh 1.5 V AA batt eri es.
4 1) Remove the battery cove r, locat ed on the backsi de of the un it and directl y above the function buttons. 2) Observe the correct polarity, and in stall 2 AA batteries. 3) Replace the battery cove r. Note: After the batteries have been installed all the LCD’s (Liquid Crystal Display) will briefly light up.
5 program each function separat ely, or you can follow the i nstructions entirely to program the Atomic Clock. Complete programming is usually don e for the initial set-up, and will require you to skip step 1 of programming se ctio ns III through VIII.
6 3) Press and release the “ SET” button to confirm the DST setting, and to advance to select the la nguage for the weekday. IV) LANGUAGE SELECTION FOR THE WEEKDAY 1) Hold do wn the “ SE T” bu.
7 4) The default month “1” will flash. Press and release the “+” bu tton to select the appropriate mon th . 5) Press and release the “ SET” button to confirm the month, an d to set the date. 6) The default date “1” will flash. Press and release the “+” button to select the appropriate da te.
8 3) Press and release the “+” button a third time and the display will return to th e normal di splay. II) INDOOR TEMPERATURE The Indoor Temperature a ppear s on the right side of the Date LCD. The temperature is checked every 10 seconds, and upd ated whenever there is a c hange.
9 3) Place the Atomic Clock onto the scre ws, using the hanging holes on the backside. Gently pull th e Atomic Clock down to lock the screw s into place. MAINTENANC E & CARE • Extreme tem peratures, vib rations, and s hock shoul d be avoided t o prevent dam age to the units.
10 SPECIFICATIONS Temperature: Measuring range: 32 ° F to 122 ° F with 0.2 ° F resolution (0 ° C to 50 ° C with 0.1 ° C reso lution) Outside range: “OFL” will be displayed Checking intervals: Every 10 second s Power source: Battery type: 2 x AA, IEC LR6, 1.
11 WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this Atomic Clock. Contact La Crosse Technology i mmediately upon discovery of any defects covere d by this warranty. Before sending the Atomic Clock in for repa irs, contact La Crosse Technology.
An important point after buying a device La Crosse Technology WS-6003U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought La Crosse Technology WS-6003U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data La Crosse Technology WS-6003U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, La Crosse Technology WS-6003U you will learn all the available features of the product, as well as information on its operation. The information that you get La Crosse Technology WS-6003U will certainly help you make a decision on the purchase.
If you already are a holder of La Crosse Technology WS-6003U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime La Crosse Technology WS-6003U.
However, one of the most important roles played by the user manual is to help in solving problems with La Crosse Technology WS-6003U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device La Crosse Technology WS-6003U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
