Instruction/ maintenance manual of the product Radio Controlled Projection Alarm WT-5600 La Crosse Technology
Go to page of 15
WT-5600 Radio Controlled Projection Alarm Instruction Manual PRO J EC TI O N.
2 TABLE OF CONTENTS Topic Page Invent ory o f Conte nt s 3 About W WVB 3 Quick Set -Up Gui de 4 Detailed Set-Up Guide Battery Installation 5 Program Mode Programming Sequence 6 Function Button s 6 Tim.
3 INVENTORY OF CONTENTS 1) WT-560 0 Al arm Clock 2) AC adapter/transfor mer 3) Instruct ion ma nual and war ranty car d. ADDITIONAL EQUIP MENT (not inclu ded) 1) Two fres h 1.5V AA batteries (optional for alarm clock) FEATURES OF PROJECTION ALARM 1. Radio-c ontrolle d time and date 2.
4 QUICK SET-UP GUIDE 1) Insert two AA batteries into the Projection alarm and/o r plug into wall 2) Wait 10 mi nutes for WWVB reception. 3) If there is no WWVB reception, m anually set the time and date (instructions in the Program Mode). 4) Program the settings.
5 AC adapter receptacle DETAILED SET-UP GUIDE BATTERY INSTALLATION 1. Rem ove the bat tery cove r. 2. Observe the correct polarity an d install 2 AA batteries. 3. In addition or instead of inserting batteries, the AC adapter can be used. Simply plug the ad apter into the receptacle on the bottom of the alarm clock and the n plug in adap ter.
6 PRO J EC TIO N PROGRAM MODE To enter the Program Mod e, hold down the “MODE+” button for 2 seconds, until th e time zone (“-5” defau lt) flash es in the lower right.
7 3. From –5h to –8h, a US map with the highlighted time zone will also be displayed to the right of the time display. 4. Press the “ AL” button to move to the hou r setting or press the “SNOOZE” button to co nfirm the time zone and return to th e display mod e.
8 E. DATE SETTING Note: When the WWVB signal is found, that date will over-ride the man ually set date. 1. Hold do wn the “MODE/+” button for 2 seco nds (the selected time zone will flash), press the “AL” button three times until the year flashes.
9 B. RADIO-CONTROLLED TIME AND DATE 1. The projection alarm will automatically search for the time signal upon initial set-up and ev ery nigh t. 2. When the signal is being received , th ere will be a “tower” icon flashing to the right of the time display.
10 Li g ht Intensit y Projection Direction C. PROJECTION OF TIM E 1. When plugg ed into an AC outlet, th e projection alarm can continuously project the time. 2. When operating on ba tteries alo ne, the Projection Alarm will o n ly project when a bu tton is pressed.
11 Alarm is Active 2. ACTIVATIN G/DEACTIVATING THE ALARM a. After entering the alarm-settin g mode, the alarm is activated. b. To toggle between activating and deactivating the alarm , press the “AL ” button briefly. “((( • )))” will be disp layed to the left of the time display when the alarm is activated.
12 F. CHANGIN G DISPL AY MODE (DAY, SE CON DS , AN D ALA RM TIME) There is th ree possible display m odes to view t he date, sec onds and alarm time. To change the displ ay (start ing at the defaul t of m onth - date ): 1. Press the “MODE/+” button and the display will n ow show seconds.
13 TROUBLESHOOTING Problem: The Projection is faint Solution: 1) Chang e in ten sity setting 2) Use AC adapter 3) Darke n surroun dings 4) Use fresh batteries (if AC i s not used) Problem: The LCD is fai nt. Solution: 1) Replace the batteries. Problem: No reception of WWVB signal.
14 W AR R AN T Y IN F O RM AT I ON La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship.
15 For warranty work, technical support, or information contact: La Crosse Technology 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.1020 e-mail: support@lacrossetechnology.com (warranty work) sales@lacrossetechnology.com (information on other products) web: www.
An important point after buying a device La Crosse Technology Radio Controlled Projection Alarm WT-5600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought La Crosse Technology Radio Controlled Projection Alarm WT-5600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data La Crosse Technology Radio Controlled Projection Alarm WT-5600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, La Crosse Technology Radio Controlled Projection Alarm WT-5600 you will learn all the available features of the product, as well as information on its operation. The information that you get La Crosse Technology Radio Controlled Projection Alarm WT-5600 will certainly help you make a decision on the purchase.
If you already are a holder of La Crosse Technology Radio Controlled Projection Alarm WT-5600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime La Crosse Technology Radio Controlled Projection Alarm WT-5600.
However, one of the most important roles played by the user manual is to help in solving problems with La Crosse Technology Radio Controlled Projection Alarm WT-5600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device La Crosse Technology Radio Controlled Projection Alarm WT-5600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
