Instruction/ maintenance manual of the product Radio Controlled Projection Alarm WT-5350 La Crosse Technology
Go to page of 8
Contents Language Page English 2 F rançais 31 Spanish 61 FCC ID: OMO-01RX (receiver) THIS DEVICE COMPLIES WITH P AR T 15 OF THE FCC R ULES. OPERA TION IS SUBJECT TO THE FOLLO WING TWO CONDITIONS: 1. THIS DEVICE MA Y NOT CA USE HARMFUL INTERFERENCE, AND 2.
GB P.2 GB P.3 GB P.4 GB P.5 T ABLE OF CONTENTS T opic Pa ge Inv entor y of Contents 4 About WWVB 5 Quic k Set-Up Guide 6 Detailed Set-Up Guide Battery Installation 7 Program Mode Programming Sequence .
a tone will sound f or ev er y second. It is possible that y our Projection Alarm ma y not be exactly on the second due to the v ariance in the quar tz. Howe ver , the clock will adjust the quartz timing over the course of sev eral days to be v ery accurate; under .
A. PROGRAMMING SEQUENCE 1. Time Zone Setting 2. Hour Setting 3. Minute Setting 4. Y ear Setting 5. Month Setting 6. Day Setting 7. 12/24-hour Mode 8. Daylight Sa ving Time On/Off B. FUNCTION BUTTONS There are 5 function buttons located on the front of the Projection Alarm.
1. Hold down the "MODE/+" button for 2 seconds (the selected time z one will flash), press the "AL" button three times until the y ear flashes. 2. Press the "MODE/+" button to select the year . 3. Press the "AL" button to confir m the y ear and move to the month setting.
7. For more detail visit http://www .boulder.nist.go v/timefreq.htm. T o listen to the NIST time call (303) 499-7111. This number will connect you to an automated time, announced at the top of the minute in "Coordinated Universal Time", which is also known as Greenwich Mean Time (GMT).
3. TURNING ALARM OFF (WHILE SOUNDING) Note: The alarm will sound for 23 seconds and then increase in v olume and speed for another 62 seconds (85 seconds total). If no button is pushed it will shut off and be activ e for the ne xt day . a. While the alarm is sounding, press the "SNOOZE" bar to disable the alarm for six minutes .
1 WARRANTY INFORMATION La Crosse Technolog y, Ltd pr ovid es a 1-year limited warrant y on this product against manufactur in g d efects in materi als an d workmanship.
An important point after buying a device La Crosse Technology Radio Controlled Projection Alarm WT-5350 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought La Crosse Technology Radio Controlled Projection Alarm WT-5350 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data La Crosse Technology Radio Controlled Projection Alarm WT-5350 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, La Crosse Technology Radio Controlled Projection Alarm WT-5350 you will learn all the available features of the product, as well as information on its operation. The information that you get La Crosse Technology Radio Controlled Projection Alarm WT-5350 will certainly help you make a decision on the purchase.
If you already are a holder of La Crosse Technology Radio Controlled Projection Alarm WT-5350, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime La Crosse Technology Radio Controlled Projection Alarm WT-5350.
However, one of the most important roles played by the user manual is to help in solving problems with La Crosse Technology Radio Controlled Projection Alarm WT-5350. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device La Crosse Technology Radio Controlled Projection Alarm WT-5350 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
