Instruction/ maintenance manual of the product 208 V APC
Go to page of 6
990-3567-001 03/2009 Smart-UPS ® Addendum UPS Rack-Mount Installation English.
.
1 Introduction The APC Uninterruptible Power Supply (UPS) is designed to prevent utility b lack outs, brownouts, sags, and surges from reaching your electronic e qui pment.
2 I NST ALLA TION Install the Rails in the Rack The UPS fits in a standard 19 inch, (46.5 cm) rack..
3 Mount the UPS in a Rack The UPS is h eavy. To lighten it, you must remove the battery before mounting the unit in th e rack, Steps n and o . Ensure that both cleats are properl y seated in the rail. Check to ensure the rack will not tip a fter installing the UPS into the rack.
4 Install and Connect the Battery and Attach the Front Bezel n o p q.
An important point after buying a device APC 208 V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought APC 208 V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data APC 208 V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, APC 208 V you will learn all the available features of the product, as well as information on its operation. The information that you get APC 208 V will certainly help you make a decision on the purchase.
If you already are a holder of APC 208 V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime APC 208 V.
However, one of the most important roles played by the user manual is to help in solving problems with APC 208 V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device APC 208 V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
