Instruction/ maintenance manual of the product IKD 1157.1 GE-UL Kuppersbusch
Go to page of 9
INSTRUCTIONS FOR USE AND INST ALLA TION INSTRUCTIONS IKD 1 157.1 GE-UL Manual ND ISLA UL ing.qxd 6/05/2003 11:50 PÆgina 1.
Dear client: Congratulations on your choice. We are sure that this modern, functional and practical apparatus, made with top quality materials, will fully satisfy your needs.
• Once the kitchen hood has been installed, ensure that the feed cable to the network is not in contact with any live metal edges. • Avoid connecting the apparatus to conductors used exits for fumes produced by a non-electric energy source. E.g.: boilers, chimneys, etc.
4 ENG To improve draught we recommend to turn the extractor fan on a few minutes before cooking so that the flow of air is continuous and stable when fumes are extracted. Similarly, keep the extractor fan on for a few minutes after cooking to completely extract fumes and odours.
5 ENG Problem solving Proceed with the following checks before calling the Technical Service: Sizes and specifications 2 1 3 Problem Possib le caus e Solution The extractor fan ce ases to function The kitchen hood feed cable is not c onnected to the network.
6 ENG KÜPPERSBUSCH reserves the right to make changes and corrections to its products as it deems necessary, without altering their basic characteristics . Technical Code Network C ode (V) Network Frecuency (Hz) Lights/ Motor Po wer (W ) Motor Volu me 22UL324I S 120 60 2x20 / 340 850 m 3 /h S U L U C Tec.
7 ENG On installing the kitchen hood make sure that the Safety Instructions set out on page 2 are complied with. • WARNING : TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: a.
8 ENG FIG.1 When exterior gas extraction to the outside is not possible, then the kitchen hood may be set to purify the air by recycling it through active charcoal filters. The active charcoal filters have an active life of between three to six months, depending on the individual conditions of use.
9 ENG 6) Fit the part (A) if the inner tube (not supplied) is Ø150 or (A) + (B) if it is Ø120. 7) Attach the inner tube with a clamp (not supplied) to (A) or (B) as the case may be. 8) Introduce the upper tubecover (A8) into the lower tubecover (A9).
An important point after buying a device Kuppersbusch IKD 1157.1 GE-UL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kuppersbusch IKD 1157.1 GE-UL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kuppersbusch IKD 1157.1 GE-UL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kuppersbusch IKD 1157.1 GE-UL you will learn all the available features of the product, as well as information on its operation. The information that you get Kuppersbusch IKD 1157.1 GE-UL will certainly help you make a decision on the purchase.
If you already are a holder of Kuppersbusch IKD 1157.1 GE-UL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kuppersbusch IKD 1157.1 GE-UL.
However, one of the most important roles played by the user manual is to help in solving problems with Kuppersbusch IKD 1157.1 GE-UL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kuppersbusch IKD 1157.1 GE-UL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
