Instruction/ maintenance manual of the product 30-100 Kuhn Rikon
Go to page of 24
8” Bench Drill Press Model: 30-100 Owner ’ s Manual For more information: www .rikontools.com or info@rikontools.com For Parts or Questions: techsupport@rikontools.com or 877-884-5167 Record the serial number and date of purchase in your manual for future reference.
Safety W arnings IMPORT ANT! Safety is the single most important consideration in the operation of this equipment. The following instructions must be followed at all times.
SA VE THESE INSTRUCTIONS. Refer to them often. 3 California Proposition 65 W arning W ARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
T able of Contents Safe ty W arni ngs. ... .... ... .... .... ... .... .... ... .... .... ... .... ... .... .... ... .... .... ... .... .... ... .... .... ... .... ... .... .... ... .... .... ... .... .... ..2 -3 Special Safety Rules For Drill Presses.
5 Contents of Package Unpacking and Checking Contents Item Description 1 Drill Press Head 2 Base 3 T able 4 1/2” Chuck 5 Chuck Key 6 Hardware Bag (See Contents Below) 7 Feed Handle 8 Column Item Des.
6 Getting to Know Y our Drill Press 1 2 3 6 7 8 10 1 1 12 Item Description 1 Base 2 T able Lock Handle 3 T able 4 Column Support T ube 5 Handle Return Spring 6 Depth Stop 4 5 Item Description 7 Belt C.
Unpacking and Clean-up 1. Carefully nish removing all contents from shipping carton. Compare contents of the shipping carton with the list shown on page 5. Place parts on a protected surface. 2. Report any shipping damage to your local distributor .
8 Assembly 3. Slide the drill press head over the column. (Fig.03) 4. Center the drill press head over the table and base. T ighten the drill press head into position by locking the two hex screws on the side of the casting. (A-Fig.04) Fig.03 Fig.04 5.
9 Assembly 6. The feed handle (A-Fig.06) is secured to the feed shaft with the supplied Allen bolt (B-Fig.06). Fig.06 A B 7. Depth Stop: The depth stop and scale are found on the left side of the switch box. T o adjust, lower the drill chuck until pointer shows desired depth on the scale .
Assembly 10 Fig.09 10. Loosen the motor lock knob (A-Fig.10). Move the motor (B-Fig.10) manually toward the feed handle to take tension off of the belt. Fig.10 A B 1 1.Move the drive belt to the desired speed position, refer to speed chart inside belt cover .
T roubleshooting 1 1.
Use this section to record maintenance, service and any calls to T echnical Support: 12 Notes W ARNING: This machine must be grounded. Replacement of the power supply cable should only be done by a qualied electrician.
In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug.
Explosion Diagram 14.
Parts List 15 KEY No. Bushing-Rubber Knob Screw-Pan Hd.M5x0.8-1.2 Belt-”V” 5/16x26 Guard w/Labels Screw-W asher Hd. Ring Retaining Bearing-Ball 17mm Spacer Insert-Pulley Pulley-Spindle Nut-Pulley Clamp Cord Screw-Pan Hd.
.
.
Explosion Diagram 18.
KEY No. Gasket-Quill Bearing-Ball 12mm T ube-Quill Screw-Pan M5x0.8-20 Collar-Stop Ring Retaining Shaft-Spindle Chuck Key-Chuck Nut-Hex M6x1.0 Nut-Hex M5x.
Explosion Diagram 20.
KEY No. Support-T able w/Scale Support-Lock Handle T ube/Support Base Screw-Hex Hd. M8x1.25-20 Screw-Hex Hd. 1/2-12x7/8 T able 30-100-1D 30-100-2D 30-100-3D 30-100-4D 30-100-5D 30-100-6D 30-100-7D Des.
5-Y ear Limited W arranty RIKON Power T ools Inc. (“Seller”) warrants to only the original retail consumer/purchaser of our products that each product be free from defects in materials and workmanship for a period of ve (5) years from the date the product was purchased at retail.
Notes.
For more information: 16 Progress Rd Billerica, MA 01821 877-884-5167 / 978-528-5380 techsupport@rikontools.com www .rikontools.com Copyright RIKON Power T ools, Inc.
An important point after buying a device Kuhn Rikon 30-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kuhn Rikon 30-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kuhn Rikon 30-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kuhn Rikon 30-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Kuhn Rikon 30-100 will certainly help you make a decision on the purchase.
If you already are a holder of Kuhn Rikon 30-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kuhn Rikon 30-100.
However, one of the most important roles played by the user manual is to help in solving problems with Kuhn Rikon 30-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kuhn Rikon 30-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
