Instruction/ maintenance manual of the product 10-300 Kuhn Rikon
Go to page of 17
Record the serial number and date of purchase in your manual for future reference. Serial number: Date of purchase: For more information: www .rikontools.
Safety Instructions...............................................................................................................................................3-4 Carton Contents......................................................................
SAFETY INSTRUCTIONS General Safety Warnings KNOW YOUR POWER TOOL. Read the owner’s manual carefully . Learn the tool’s applications, work capabilities, and it s Always Keep V isitors A way from Running Machines. All visitors should be kept a safe distance from the work area.
Never Overreach. Keep your proper footing and balance at all times. Never St and on T ools. Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted.
CARTON CONTENTS The model 10-300 10 ” Bandsaw is shipped complete in one box. Unpacking and Checking Contents a. Separate all parts from carton and check each item with “Table of Carton Contents” to make sure all items are accounted for , before discarding any packing material.
ASSEMBL Y Initial Assembly The machine is supplied partly assembled. Prior to use, the following items have to be installed: bandsaw table, star knob (blade tensioning) and rip fence. T o avoid injury , do not attempt to run or use this machine until all parts are assembled and working properly .
Mounting the Bandsaw For maximun stability during use, it is strongly recommended that the bandsaw be mounted on a sturdy bench or worktable. It should be bolted down utilizing the 1/4” holes in the bandsaw base plate. (See Fig. 6) Dust Collection The bandsaw has a 2-1/2” dust extraction port (See Fig.
Installing/Changing and Setting the Saw Blade Cont. h. Replace leveling wing nut and screw to table. i. Close and lock both bandsaw wheel doors before recon- necting the power supply . T racking the Bandsaw Blade Set the tracking of the blade before setting the blade guides.
OPERA TION 1. The blade cuts on a continuous down-stroke. 2. Check all the necessary settings and adjustments, and ensure that all the recommended safety procedures are in place. 3. S tart the bandsaw by placing the switch towards the ‘on’ position.
MAINTENANCE T o avoid injury due to unexpected starting, before cleaning or carring out maintenance work, switch off and disconnect the bandsaw from the power source. Never use water or other liquids to clean the bandsaw . Use a dry brush. Regular maintenance of the bandsaw will prevent unneces- sary problems.
TROUBLE SHOOTING Problem Diagnosis Remedy The machine does not work when switched on. 1. No power supply . 2. Defective switch. 1. Check the cable for breakage. 2. Check the fuse or breaker . 3. Contact you local dealer for repair parts. The blade does not move with the motor running.
12 Eletrical Requirement s In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug.
Parts List 13 Key No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 6.
Parts Explosion 14.
Notes 15.
W arranty 2-Y ear Limited W arranty RIKON Power T ools/Richen Enterprise, Inc. (“Seller”) warrants to only the original retail consumer/ purchaser of our products that each product be free from defects in materials and workmanship for a period of two (2) years from the date the product was purchased at retail.
For more information: 400 West Cummings Park, Suite 1000 Woburn, MA 01801 877-884-5167/781-933-8400 techsupport@rikontools.com www .rikontools.com Copyright Richen Enterprise, Inc.
An important point after buying a device Kuhn Rikon 10-300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kuhn Rikon 10-300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kuhn Rikon 10-300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kuhn Rikon 10-300 you will learn all the available features of the product, as well as information on its operation. The information that you get Kuhn Rikon 10-300 will certainly help you make a decision on the purchase.
If you already are a holder of Kuhn Rikon 10-300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kuhn Rikon 10-300.
However, one of the most important roles played by the user manual is to help in solving problems with Kuhn Rikon 10-300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kuhn Rikon 10-300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
