Instruction/ maintenance manual of the product KS-324F KTI Networks
Go to page of 17
Installation Guide 24 - port 10/100 Fast Ethernet Switch with 1 Fiber Connection Model Name : KS - 324 F.
We make no warranties with respect to this documentation and disclaim any implied warranties of merchantability, quality, or fitness for any particular purpose.
Contents 1. Introduction 1.1 Package Contents 2. Where to Place the 24port Switch 3. Configure The Network Connection 3.1 Connecting Devices to the 24port Switch 3.2 Connecting to Another Ethernet Switch/Hub 3.3 Application 4. For 100Ba seFX Connection 4.
.
1. Introduction This 24port Switch is a 24 - port 10/100Mbps Fast Ethernet switch. This switch supports the advanced features for current switch design. This switch can auto detect the 10/100Mbps speed, full/half duplex mode and MDI/MDI - X connection.
2. Where To Place the 24port Switch This 24port Switch can be placed on a flat surface (your desk, shelf or table). Place the 24port Switch at a location with these connection considerations in mind: l The switch configuration does not break the rules as specified in Section 3.
3. Configure the Network Connection 3.1 Connecting Devices to the 24port Switch [ Connection Guidelines: ] l Use Category 3 or 5 twisted - pair Ethernet cable when connecting 10BaseT devices to the sw.
3.3 Application A switch can be used to overcome the hub to hub connectivity limitations as well as improve overall network performance. Switches make intelligent decisions about where to send network traffic based on the destination address of the packet.
4. For 100BaseFX Connection 4.1 Adding 100BaseFX Module This 24port switch has a module port for 100BaseFX connection extension. You can add a 100Bas eFX module to the switch and this switch gets a 100BaseFX port for long distance fiber optic cable connection.
5. LEDs Conditions Definition 5.1 LEDs Defined The LEDs provide useful information about the switch and the status of all individual ports. LED STATUS CONDITION Power ON Switch is receiving power. ON Port has established a valid link. Flashing Data packets being rece ived or sent.
6. Configure from Console 6.1 Hardware Setting for Console Before using the console connection to configure the switch, please make sure that you have already install the terminal program "HyperTrm" in your Windows. If you can not find it in your Windows, pl ease install it first with your Windows Installation Disk.
disable the backpressure function for half duplex. If it is enable, it can prevent packets lost in half duplex mode. But it will also reject packets when the network traffic is very h eavy and that may cause some network connections fail. 2. Port Setting : You can set the operation speed, duplex mode from here.
You can configure VLAN groups from this function. Because every port must belong to some VLAN, the removed port from VLAN will be assigned to Group 24 automatically if it does not belong to any VLAN any more after being removed. In the setting, VLAN groups can be overlapped on ports in this switch.
A. Product Specifications Access Method CSMA/CD, 10 Mbps or 100 Mbps Standards Conformance IEEE 802.3 10BASE - T, IEEE 802.3u 100BASETX/FX Communication Rate 10/100Mbps on RJ - 45 ports, 100Mbps on FX.
B. Cable Specification Two different types of cable could be used on this 24port Switch: l Straight through cable l Cross - over cable l Fiber Optic cable if this 2 4port Switch has FX port Cable Sche.
C. Compliances EMI Certification FCC Class A Certification (USA) Warning: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction man ual, may cause interference to radio communications.
D. Warranty We warrant to the original owner that the product delivered in this package will be fre e from defects in material and workmanship for a period of warranty time from the date of purchase from us or the authorized reseller. The warranty does not cover the product if it is damaged in the process of being installed.
An important point after buying a device KTI Networks KS-324F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KTI Networks KS-324F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KTI Networks KS-324F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KTI Networks KS-324F you will learn all the available features of the product, as well as information on its operation. The information that you get KTI Networks KS-324F will certainly help you make a decision on the purchase.
If you already are a holder of KTI Networks KS-324F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KTI Networks KS-324F.
However, one of the most important roles played by the user manual is to help in solving problems with KTI Networks KS-324F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KTI Networks KS-324F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
