Instruction/ maintenance manual of the product KS-108F KTI Networks
Go to page of 14
-1- Installation Guide 10/100 Fast Ethernet Switch with 100FX Connectivity KS-108F V er .B Series DOC.060302-KS108FB.
-2- (C) 2005 KTI Networks Inc. All rights reserved. No part of this documen- tation may be reproduced in any form or by any means or used to make any directive work (such as translation or transformation) without per- mission from KTI Networks Inc. KTI Networks Inc.
-3- The information contained in this document is subject to cha nge without prior notice. Copyright (C) All Rights Reserved. TRADEMARKS Ethernet is a registered tra demark of Xerox Corp. FCC NOTICE This device complies with Class B Part 15 the FCC Rules.
-4- T a ble of Contents 1 . Introduction .................................................................. 5 1 . 1 Features ........................................................................................... 6 1 . 2 Specifications ...........
-5- 1. Introduction This 8-port Fast Ethernet switch series provides seven 10/100 TP ports and one 100BASE-FX fiber port, each capable of transmitting or receiv- ing information simultaneously at full wire speed to control and allocate the network bandwidth.
-6- 1. 1 Features Designed for resolving congestion problems caused by bandwidth-hun- gry devices and bandwidth-intensive applications as well as a high num- ber of users, the switches not only a dhere to the IEEE 802.
-7- 1.2 Specifications 10/100 Ports IEEE 802.3 10BASE-T , IEEE 802.3u 100BASE-TX std. Shielded RJ-45 jacks with Auto MDI-X detection Auto-negotiation capable Speed for 10Mbps or 100Mbps Full-duplex or half-duplex mode support 100FX Port IEEE 802.
-8- 100FX Port Fiber Specifications KS-108FB-xxx Duplex Series Model Ext Fiber Wavelength Tx Power Sens. Ref.Distance -T S T MMF 1310nm -19 ~ -14dBm -31dBm 2 km -C S C MMF 1310nm -19 ~ -14dBm -31dBm 2.
-9- 2 . In stalling the Switch 2. 1 Unpacking Check to see that you have everything before you start the installation. • Installation guide • The switch unit • One AC power adapter for the unit 2.2 Checking AC Power Before you begin the installation, check the AC voltage of your area.
-10- The DC power ja ck for the AC power a da pter is located on the rear of the switch as shown below: 2. 3 Installing the Switch 1 . Install the switch with the AC power adapter provided. 2 . Connect the power adapter cable to the switch before connecting the adapter to the AC outlet.
-11- 3. Making Network Connections 3.1 Switched Ports The following figure shows the locations of the switched ports: 3.2 Making UTP Connections 10/100 TP Port Configuration All 10/100 TP ports suppor.
-12- Cables Depending on the connection speed, use the proper UTP cables: Speed Cables used Distance 100M Cat. 5, 5e, or higher grade 100 meters 10M Cat. 3, 4, 5, 5e, or higher grade 100 meters Auto-MDI-X Function An Auto-MDI-X function will automatically detect if a crossover is re- quired a nd make the swap of Tx pair a nd Rx pair internally .
-13- 100FX Duplex Selector This selector is used for 100FX port duplex mode selection as follows: The following table lists the maximum MM fiber cable length connecting to different devices: Connected.
-14- 4. LED Indicators 4. 1 LED Pa nel The switch provides comprehensive LED indicators for di agnosing a nd monitoring the operation of the switch as illustrated below: 4.2 Interpretation LED Functions POWER LED : indicates the power status of the switch.
An important point after buying a device KTI Networks KS-108F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KTI Networks KS-108F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KTI Networks KS-108F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KTI Networks KS-108F you will learn all the available features of the product, as well as information on its operation. The information that you get KTI Networks KS-108F will certainly help you make a decision on the purchase.
If you already are a holder of KTI Networks KS-108F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KTI Networks KS-108F.
However, one of the most important roles played by the user manual is to help in solving problems with KTI Networks KS-108F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KTI Networks KS-108F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
