Instruction/ maintenance manual of the product 24-Port 10/100 Workgroup Switch KTI Networks
Go to page of 5
KS-124 24-Port 10/100 Workgroup Switch User ’ s Guide DOC.070524-KS124.
1 . Introduction The 10BASE-T/100BASE-TX Switches which are high-performance Fast Ethernet switches designed for the network core. It provides 24 10BASE-T/100BASE-TX ports that can si gnificantly improve the performance of your network’ s backbone, and de liver the throughput needed to support a broad range of advanced network applications .
z Runt and CRC Filtering eliminates erroneous packet s to optimize the network bandwidth. z Support to handle up to 1522 bytes packet. z LED indicators for simple diagnostics and management. z Internal switching power supply . z Plug and Play . 3 . Package Content s z Rackmount Kit.
4.3 Rear Panel The rear panel of the 24-port Fast Et hernet Switch indicates an AC inlet, which accepts 100-240V AC 50-60Hz power input. Specifications St andard IEEE 802.
5. FCC W arning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide re asonable protection against harmful interference when the equipment is operated in a commercial environment.
An important point after buying a device KTI Networks 24-Port 10/100 Workgroup Switch (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KTI Networks 24-Port 10/100 Workgroup Switch yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KTI Networks 24-Port 10/100 Workgroup Switch - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KTI Networks 24-Port 10/100 Workgroup Switch you will learn all the available features of the product, as well as information on its operation. The information that you get KTI Networks 24-Port 10/100 Workgroup Switch will certainly help you make a decision on the purchase.
If you already are a holder of KTI Networks 24-Port 10/100 Workgroup Switch, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KTI Networks 24-Port 10/100 Workgroup Switch.
However, one of the most important roles played by the user manual is to help in solving problems with KTI Networks 24-Port 10/100 Workgroup Switch. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KTI Networks 24-Port 10/100 Workgroup Switch along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
