Instruction/ maintenance manual of the product KSP7B Krell Industries
Go to page of 9
KSP-7B STEREO PREAMPLIFIER OWNER’S MANUAL.
45 Connair Road Orange, CT 06477-0533, USA INTRODUCTION & GENERAL INFORMATION Thank you for purchasing the KRELL KSP-7B Preamplifier. The KSP-7B is the latest evolution of KRELL’s entry level preamplifier technology. Many of its design concepts are similar to our more expensive preamplifiers and are wholly unique to KRELL.
ABOUT THE OWNERS ~ MANUAL The KSP-7B Owner’s Manual is divided into various groups of information. The purpose of he document as a whole is to familiarize you with the unit and guide you through its set-up, installation and operation in a logical progression.
Moving Coil Cartridges:’ The KSP-7B is shipped with the phono section gain set for moving coil cartridges and a load of 800 ohms. The load can be changed with a set of internal switches. To access these the top cover must be removed with the supplied allen driver.
Co When installing th’e KSP-7B, always connect the DC cable between the preamplifier chassis and the power supply before plugging the power supply into the AC mains. d. Always disconnect the AC from the mains before disconnecting the DC cable from the preamplifier.
This supply does not’ require that an AC circuit be dedicated for its use only. It should be connected to a 15 or 20 amp circuit that is dedicated for the source components and preamplifier. Do not connect this supply to the mains with light-gauge (18 or higher) extension cords or multiple outlet adapters.
i. For use with an~plifiers with single-ended (unbalanced) inputs: connect the RCA Main Outputs to the amplifier inputs. This constitutes the conventional hook-up for a single-ended unbalanced system. ii. For use with amplifiers with balanced inputs: connect the XLR Main Outputs to the amplifier inputs.
Note: Components that are not being listened to should be turned off or have their volume turned down. For instance, a tuner should be turned off or have its volume lowered while it is not being listened to. Use the ~ switch to choose between the output of the ~ switch or the playblack from a tape deck for monitoring.
The KSP-7B has a limited warranty of five years from the date of purchase. Please return the completed warranty card immediately after successful installation and operation are completed. The warranty for KRELL products is valid in the country to which they were originally shipped and at the factory.
An important point after buying a device Krell Industries KSP7B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Krell Industries KSP7B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Krell Industries KSP7B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Krell Industries KSP7B you will learn all the available features of the product, as well as information on its operation. The information that you get Krell Industries KSP7B will certainly help you make a decision on the purchase.
If you already are a holder of Krell Industries KSP7B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Krell Industries KSP7B.
However, one of the most important roles played by the user manual is to help in solving problems with Krell Industries KSP7B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Krell Industries KSP7B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
