Instruction/ maintenance manual of the product Krell KPS 28c Krell Industries
Go to page of 21
"rile I.-EAriER IN AUDIO ENGINEERING KPS 28c Krell Playback System with Krell CAST Technology Instructions for Use Owner’s Reference.
KPS 28c Krell Playback System with Krell CAST Technology v 00.0 Krell Industries, Inc. 45 Connair Road Orange, CT 06477-3650 USA TEL 203-799-9954 FAX 203-891-2028 E-MAIL krell @ krellonline.com WEBSITE http:l/www.krellonline.com This product complies with the EMC directive (89/336/EEC) and the low-voltage directive (73/23/EEC).
Contents INTRODUCTION DEFINITION OF TERMS REVOLUTIONARY KRELL CAST TECHNOLOGY UNPACKING PLACEMENT AC Power Guidelines QUICK START Input and Output Connections Power On To Play a Compact Disc FRONT PAN.
Illustrations FIGURE 1 The KPS 28c Front Panel FIGURE 2 The KPS,28c Back Panel FIGURE 3 The KPS 28c Remote Control Page 5 7 9 iv Krell Playback System 28c.
Introduction Definition of Terms Thank you for your purchase of the Krell Playback System 28c. The KPS 28c’s transport design eliminates error-producing wobble and delivers exceptional tracking and focus accuracy, regard- less of environment or disc characteristics.
Revolutionary Krell CAST Technology Current Audio Signal Transmission, .termed CAST, is a revolutionary method of connecting analog audio components for unparalleled sonic performance.
Unpacking Placement 1. Open the shipping box and remove the top layer of foam. You see these items: 1 KPS 28c 1 AC power cord 1 12 VDC (12 Volt trigger) remote cable link 1 1.25 amp slowblow fuse 1 T-10 Torx wrench 1 KPS 28c remote control 2 AAA size 1.
Quick Start The abbreviated procedures in this Quick Start section enable you to connect and operate your KPS 28c system quickly to enjoy its basic fea- tures. To access the full array of available fea- tures for the KPS 28c, please read the entire owner’s reference manual.
FIGURE 1 THE KPS 28c FRONT PANEL 2 POWER 9 8 10 11 12 KPS 28c 6 7 Compact Disc Transport Functions 1 Compact Disc Transport 2 Open/Close Button Power 3 Stand-by LED 4 Power Button 5 Power LED Compact .
Front Panel Description See Figure I on page 5 The front panel of the KPS 28c accesses power on and off and compact disc functions. The compact disc display shows compact disc play- back and programming status, Front panel fea- tures and their descriptions follow.
FIGURE 2 THE KPS 28c BACK PANEL 14 ? 20 LEFT IN IN KPS 28c Krell Playback System KRELLINDUSTRIES. INC. 4~ OONNAIR ROAD ORANGE, CT 08477-3850 USA 18 19 21 17 16 Analog Outputs 13 Left and Right CAST Ou.
Back Panel Description See Figure 2 on page 7 The back panel of the KPS 28c provides Con- nections for analog and digital outputs, power, and remote control inputs.
FIGURE 3 THE KPS 28c REMOTE CONTROL 22 23 26 27 28 30 +10 MUTE f-- OISPI-&Y~ (~ (~ (~OPEN MODE 0 CL.R PRO~ r-- LEVEL’~ PAUSE STOP PLAy r-- TRACK’--I I’--SEAFICH --i KPS 280 25 24 32 33 34 29.
Remote Control Description See Figure 3 on page 9 BA’n’ERY INSTALLATION AND REMOVAL The KPS 28c remote control uses two AAA-size 1.5 Volt batteries. Batteries are included with the shipment. To install the batteries: 1. Remove the backplate, using the supplied T-10 Torx wrench.
Remote Control, continued See Figure 3 on page 9 29 Play Key Use this key to start playback from the begin- ning of the compact disc, to resume playback after pause, or to start playback of a pro- grammed sequence. 30 Track Forward and Back Keys Use these keys to select and begin playing the track that follows or precedes the current track.
Connecting the KPS 28c to Your System See Figure 2 on page 7 INPUT AND OUTPUT CONNECTIONS Analog Output Connections The KPS 28c is equipped with three analog out- put connections: CAST, balanced, and single- ended.
Connecting Your KPS 28c, continued See Figure 2 on page 7 Operating Your KPS 28c Note You can set up your KPS 28c to play a musi- cal selection in three different areas.
Operating the KPS 28c, continued Key in the desired track sequence using the direct track access keypad (26). The select- ed tracks, the number of tracks selected, and the total playing time of the programmed track sequence appear in the compact disc display in the order in which the tracks are stored.
Warranty This Krell product has a limited warranty of five years for parts and labor on circuitry and three years for parts and labor on all mechanical components. Should this product fail to perform at any time during the warranty, Krell will repair it at no cost to the owner, except as set forth in this warranty.
Return Authorization Procedure If you believe there is a problem with your com- ponent, please contact your dealer, distributor, or the Krell factory to discuss the problem before you return the component for repair.
Krell Industries, Inc. 45 Connair Road Orange, CT 06477-3650 USA TEL 203-799-9954, FAX 203-891-2028 E-MAIL krell@ krellonline.com WEBSITE http://www.krellonline.com KPS 28c Krell Playback System with Krell CAST Technology v 00.0 Specifications FREQUENCY RESPONSE 20 Hz-20 kHz +0.
An important point after buying a device Krell Industries Krell KPS 28c (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Krell Industries Krell KPS 28c yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Krell Industries Krell KPS 28c - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Krell Industries Krell KPS 28c you will learn all the available features of the product, as well as information on its operation. The information that you get Krell Industries Krell KPS 28c will certainly help you make a decision on the purchase.
If you already are a holder of Krell Industries Krell KPS 28c, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Krell Industries Krell KPS 28c.
However, one of the most important roles played by the user manual is to help in solving problems with Krell Industries Krell KPS 28c. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Krell Industries Krell KPS 28c along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
