Instruction/ maintenance manual of the product SDQ5PIR-BL APart
Go to page of 12
INFO@AP ART -AUDIO .COM MANU AL SDQ5Pir.
WWW .AP ART -A UDIO.COM 2 F eatures The APart SDQ5Pir powered loudspeaker set is a versatile and very compact, easy to use, plug and play sound system. It consists of an amplied loudspeaker with a 5.25” woofer , a high frequency unit and a second linkable passive loudspeaker , powered by the second amplier built into the active speaker .
INFO@AP ART -AUDIO .COM 3 Rear panel 1 3 2 4 5 12 6 7 8 9 10 11 13 14 1. Power switch: turn mains power on and off. 2. Power cord inlet: attach the power cord supplied to this socket.
WWW .AP ART -AUDIO.COM 4 Communication with SDQ5Pir via RS232 is done with simple ASCII Commands and Replies. The port settings are 19200 Baudrate, 8 databits, no parity and 1 stop bit. The physical connection is as described below: Standard 9 pin serial cable, wired straight through (no null modem cable !!!).
INFO@AP ART -AUDIO .COM 5 Conguration Settings: SELECT is input source selection, a possible command could look like this: “Set select AB<CR>”. In this case, both inputs A and B will be mixed together by the SDQ5Pir unit. Possible values are A, B, AB or WI.
WWW .AP ART -AUDIO.COM 6 Restore Factory Settings: The factory defaults are shown in the RS232 commands table. In order to restore the factory default settings, enter the following command: SET REST ORE ON<CR> This function can also be executed without using RS232 commands.
INFO@AP ART -AUDIO .COM 7 Attribute Description Commands V alue Factory default SDQL VL V olume level GET , SET , INC, DEC OFF (-64) -63 to 0 0 MAXL VL Maximum allowed level GET , SET BACK, OFF (-64) .
WWW .AP ART -AUDIO.COM 8 ir Remote Control If you don’t use the remote for an extended period of time, remove the battery and store it in a safe location. This will avoid possible damage or corrosion from battery leakage. W arning: Do not attempt to recharge, disassemble, or incinerate this type of battery .
INFO@AP ART -AUDIO .COM 9 ir Commands SDQ5Pir device code is “807F” Infrared commands have been coded according to the NEC® protocol Function ir COMMAND Power ON 12 Power ST ANDBY 1A Input A 01 I.
WWW .AP ART -AUDIO.COM 10 T echnical specifications Speaker type 2 way bass reflex, active Input impedance minijack input A 5 k ohm Input sensitivity minijack input A 500 mV Input impedance balanced i.
INFO@AP ART -AUDIO .COM 11 • Please check the carton box for any kind of damage on reception of the goods. In case of a damaged carton, please contact your dealer before opening the carton. • Read all documentation before operating your equipment.
WWW .AP ART -AUDIO.COM 12 Company names, product names, and names of formats etc. are the trademarks or registered trademarks of their respective owners.
An important point after buying a device APart SDQ5PIR-BL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought APart SDQ5PIR-BL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data APart SDQ5PIR-BL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, APart SDQ5PIR-BL you will learn all the available features of the product, as well as information on its operation. The information that you get APart SDQ5PIR-BL will certainly help you make a decision on the purchase.
If you already are a holder of APart SDQ5PIR-BL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime APart SDQ5PIR-BL.
However, one of the most important roles played by the user manual is to help in solving problems with APart SDQ5PIR-BL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device APart SDQ5PIR-BL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
