Instruction/ maintenance manual of the product KMA-160 Krell Industries
Go to page of 4
45 Connair Drive Orange, CT 06477-0533, USA KMA-160 OWNER, S MANUAL: INSTALLATION & OPERATION INSTRUCTIONS JUNE. !,.. 19.89 GENERAL INFORMATION Thank you for purchasing the KMA-160 Monaural Amplifiers. The KMA-i60 represents the absolute latest evolution in amplifier technology and has many innovative design features.
Amplifiers dissipate much of the power they consume in heat. The KMA-160 should be installed in a location that provides unobstructed ventilation. If you have to install the units on shelves or in a cabinet, extra ventilation might be necessary. This can be easily done with fans in a variety of ways.
PROTECTION CIRCUITRY The KMA-160 has a sophisticated series of circuits that protect it from dangerous input signals or loads on the output. They also analyze various amplifier functions to prevent speaker damage caused if the amp should fail. When the protection circuit is engaged, the amplifier will stop functioning.
Once the amplifiers are in place and turned off, connect the speaker and interconnect cables. The preamplifier should be on at this point, with level fully attenuated; all other sources should be off. Connect the AC last. OPERATION When turning on the system, the amplifiers should always be last.
An important point after buying a device Krell Industries KMA-160 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Krell Industries KMA-160 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Krell Industries KMA-160 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Krell Industries KMA-160 you will learn all the available features of the product, as well as information on its operation. The information that you get Krell Industries KMA-160 will certainly help you make a decision on the purchase.
If you already are a holder of Krell Industries KMA-160, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Krell Industries KMA-160.
However, one of the most important roles played by the user manual is to help in solving problems with Krell Industries KMA-160. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Krell Industries KMA-160 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
