Instruction/ maintenance manual of the product PRS1020 Kreg
Go to page of 18
RT1 01 16 V ersion 20070701 · Woodworking machines are dangerous, and can cause personal injury if not used properly . · Read safety instructions and operating instructions for your machine completely , before using products. Using this system before understanding its safe and proper use could result in serious injury to the operator .
Precision R outer T able T op Assembly T urn the Router T able top (#2) so it’ s face down on the fl oor . Locate the two Support Struts (#7) and align them to the pre-drilled holes in the bottom of the Router T able T op. Mount the struts to the top using the eight ¾” Coarse Thread Screws (#16).
Precision R outer T able T op Assembly Precision R outer T able T op Assembly Step 5: Mounting the router to the Insert Plate Step 6: Leveling the Insert Plate to the Opening Step 7: Installing & .
1 Phenolic Insert Plate RT10101 1 2 T able T op RT10102 1 3 T-Miter Track RT10103 1 4 2” Reducing Ring RT10107 1 5 1-13/64” Reducing Ring RT10106 1 6 Brass Starting Pin RT10108 1 7 Support Strut R.
Precision R outer T able T op Assembly Precision R outer T able T op Assembly Step 5: Mounting the router to the Insert Plate Step 6: Leveling the Insert Plate to the Opening Step 7: Installing & .
Precision R outer T able T op Assembly T urn the Router T able top (#2) so it’s face down on the fl oor . Locate the two Support Struts (#7) and align them to the pre-drilled holes in the bottom of the Router T able T op. Mount the struts to the top using the eight ¾” Coarse Thread Screws (#16).
RT1 01 16 V ersion 20070701 · Woodworking machines are dangerous, and can cause personal injury if not used properly . · Read safety instructions and operating instructions for your machine completely , before using products. Using this system before understanding its safe and proper use could result in serious injury to the operator .
Tools Required: • 7/16” Open Ended Wrench • Flat Head Screwdriver • Phillips Head Screwdriver Router T able Fence Precision ASSEMBL Y INSTRUCTIONS Item# PRS1 0 1 0 7. RT10142 V ersion 20070701 www.kregtool.com • 800.447.8638 When jointing, it’s always best to make light passes so you’ll probably use the 1/32-in.
Safety Guidelines Step 13 Step 14 Step 15 Locate the 48” Center Reading T ape (#35) and trim each side to the 17-15/16” mark with a sturdy scissors. Carefully remove one corner of the backing, apply the tape 1/16 from the edge of the Large Fence and continue to remove the backing while you press the tape across the surface of the fence.
Precision R outer T able Fence Assembly Precision R outer T able Fence Assembly 2. 5. Locate the Mounting Rail (#1) and slide it over the ¾” Hex Bolts (#5) as shown. If you intend on using the Kreg Micro-Adjuster (sold separately), position the mounting rail so it’s fl ush with the front edge of the T able Mount.
Hardware # Description Part# Quantity 1 MOUNTING RAIL RT10124 1 2 CLAMP BLOCK ASSEMBL Y RT10125 1 3 FENCE MOUNT RT10126 1 4 LARGE FENCE RT10122 1 5 T ABLE MOUNT RT10123 1 6 FENCE FACE RT10128 2 7 FENC.
Precision R outer T able Fence Assembly Precision R outer T able Fence Assembly 2. 5. Locate the Mounting Rail (#1) and slide it over the ¾” Hex Bolts (#5) as shown. If you intend on using the Kreg Micro-Adjuster (sold separately), position the mounting rail so it’s fl ush with the front edge of the T able Mount.
Safety Guidelines Step 13 Step 14 Step 15 Locate the 48” Center Reading T ape (#35) and trim each side to the 17-15/16” mark with a sturdy scissors. Carefully remove one corner of the backing, apply the tape 1/16 from the edge of the Large Fence and continue to remove the backing while you press the tape across the surface of the fence.
Tools Required: • 7/16” Open Ended Wrench • Flat Head Screwdriver • Phillips Head Screwdriver Router T able Fence Precision ASSEMBL Y INSTRUCTIONS Item# PRS1 0 1 0 7. RT10142 V ersion 20070701 www.kregtool.com • 800.447.8638 When jointing, it’s always best to make light passes so you’ll probably use the 1/32-in.
2 Universal Steel Stand Tools Required: • Square • 1/2” Socket wrench & extension • (2) 3/4” Open-end or adjustable wrenches • Phillips head driver bit Please call us at 800-447-8638 with any questions regarding the assembly of this stand.
Installing Height adjusters: In this step you will be adding the Height Adjusters to the bottom of each Leg. Place the Steel Stand face-down on your work surface so that all four legs are pointed up in the air , and are easily accessible, as shown in image A .
Installing Height adjusters: In this step you will be adding the Height Adjusters to the bottom of each Leg. Place the Steel Stand face-down on your work surface so that all four legs are pointed up in the air , and are easily accessible, as shown in image A .
2 Universal Steel Stand Tools Required: • Square • 1/2” Socket wrench & extension • (2) 3/4” Open-end or adjustable wrenches • Phillips head driver bit Please call us at 800-447-8638 with any questions regarding the assembly of this stand.
An important point after buying a device Kreg PRS1020 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kreg PRS1020 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kreg PRS1020 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kreg PRS1020 you will learn all the available features of the product, as well as information on its operation. The information that you get Kreg PRS1020 will certainly help you make a decision on the purchase.
If you already are a holder of Kreg PRS1020, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kreg PRS1020.
However, one of the most important roles played by the user manual is to help in solving problems with Kreg PRS1020. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kreg PRS1020 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
