Instruction/ maintenance manual of the product 602T Kramer Electronics
Go to page of 14
KRAMER EL ECTRONICS LTD. USER MANUAL MODELS: 602T T wo-fiber Detachable Opti cal DVI Transmitter 602R T wo-fiber Detachable Opti cal DVI Receiver P/N: 2900-000646 Rev 2.
.
602T, 602R – Contents i Contents 1 Introduction 1 2 Getting St arted 2 2.1 Achieving the Best Performance 2 3 Ove rvi ew 3 3.
602T, 602R - Introduction 1 1 Introduction Welcome to Kramer Electronics! Si nce 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadca sting professional on a daily basis.
2 602T, 602R - Getting Started 2 Getting Started We recommend that you: • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment • Review the contents of this user manual • Use Kramer high-performance, high-resolution cabl es Go to http://www.
602T, 602R - Overvie w 3 3 Overview The 602T and 602R are a small and lightweight fiber optic transmitter and receiver pair for DVI signals. The 602T converts electrical signals to optical signals and the 602R decodes the optical signals ba ck to electrical signals.
4 602T, 602R - Overvie w 3.2 Defining EDID The Extended Display Identification Data (EDID) is a data-structure provided by a display, to describe its capabilities to a graphics card (that is connected to the display’s source). The EDID enables the computer to “know” what kind of monitor is connected to the output.
602T, 602R - Using the T wo-fiber Detachable Optical DVI Sy stem 5 4 Using the Two-fiber Detachable Optical DVI System This section describes how to: • Capture the EDID of the display device (see Section 4.1 ) • Connect t he d e ta c ha b l e op t ic a l D VI t r an s m it t er and receiver (se e Section 4.
6 602T, 602R - Using the T wo-fiber Detachable Optical DVI Sy stem The EDID LED flashes several times wh ile reading the EDID. The LED turns OFF after about eight seconds. 5. Disconnect the transmitter from the display. The LED lights 6. Disconnect the 602T .
602T, 602R - Using the T wo-fiber Detachable Optical DVI Sy stem 7 Figure 3: Connecting the Fiber Optic Cables 6. Turn ON the Power on the comp uter and then on the display device. 7. If the transmitter does not power up, connect the 5V po wer adapter to the 602T transmitter, and connect the adapter to the m ains electricity.
8 602T, 602R - Using the T wo-fiber Detachable Optical DVI Sy stem 4.3 Avoiding Pitfalls During Operation If any of these problems occur, we recommend the following: If the display device shows only a.
602T, 602R - Techni cal Specificatio ns 9 5 Technical Specifications INPUTS: DVI IN (602T), 2 LC opti cal connector s (602R) OUTPUTS: 2 LC optical con nec tors (602T), DVI OUT (602R) RESOLUTION: Up to WUXGA @60Hz (1 .65Gbps) POWER SOURCE: 5V DC, 570mA max.
.
.
An important point after buying a device Kramer Electronics 602T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kramer Electronics 602T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kramer Electronics 602T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kramer Electronics 602T you will learn all the available features of the product, as well as information on its operation. The information that you get Kramer Electronics 602T will certainly help you make a decision on the purchase.
If you already are a holder of Kramer Electronics 602T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kramer Electronics 602T.
However, one of the most important roles played by the user manual is to help in solving problems with Kramer Electronics 602T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kramer Electronics 602T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
