Instruction/ maintenance manual of the product CONCEPT1T APart
Go to page of 12
INFO@AP ART -A UDIO .COM MANU AL CONCEPT1 CONCEPT1T.
WWW .AP ART -AUDIO .COM 2 Main features 3 basic operating modes combined in 1 device: stereo, 2Zone linked mono and 2Zone individual mono. Paging microphone input with 2 zone programmable paging control. Standalone and/or RS232 controlled operation. Removable 19 inch rack ears included.
INFO@AP ART -A UDIO .COM 3 Front panel 2 10 9 1 3 4 5 11 6 7 8 1) Power on/off button: push this button to turn the power on and of f 2, 3, 4, 5) Source A-D selector: push this button to select line source A-D. A led above the knobs is lit when source A-D is selected.
WWW .AP ART -AUDIO .COM 4 Rear panel 1 2 3 5 6 7 8 9 10 11 12 13 14 15 16 17 18 4 1) Microphone input: connect your (paging) microphone on this euroblock connector , connect the signal on +, -, the screen on GND. Connect the eventual paging contacts between GND and Z1 (for zone 1) and between GND and/or Z2 (for zone 2).
INFO@AP ART -A UDIO .COM 5 CONCEPT1T V ersion Difference on Concept 1T 12 13 14 15 12) Lo-cut right channel/zone 2: when this button is pushed, the signal to the internal power amplier reduces the sub bass frequencies for driving small sized top speakers.
WWW .AP ART -AUDIO .COM 6 User Operation The table below shows the 3 possible operating modes: stereo, 2 separate mono zones with one linked music volume control and 2 separate mono zones with individual music volume control. Y ou can adjust the volume by turning the large rotary control from -80 dB (lowest) to 0 dB (highest).
INFO@AP ART -A UDIO .COM 7 Expert Operation RS232 & IR Information Blockdiagram In order to edit the EXPERT parameters, push select repeatedly until “EXPERT” appears in the display .
WWW .AP ART -AUDIO .COM 8 Accessories CONCEPT1T -KIT PIR-REC CONCEPT1-RC MICP A-2 Kit of 2 pcs 100V transformers to change 1 or 2 channels of the CONCEPT1 into 100 V olt line outputs. Infrared remote receiver with 5 meters of cable and mini jack connector .
INFO@AP ART -A UDIO .COM 9 ERROR conditions Symptom DiSpla y Solution no power no DiSpla y replace main fuSe. the fuSe iS loca teD inSiDe the unit near the power Switch. for qualifieD perSonnel onl y . no power, unit iS Very hot no DiSpla y power off the unit , wait for cool Down anD power on again.
WWW .AP ART -AUDIO .COM 10 CONCEPT1 & CONCEPT1T TEChNiCal sPECifiCa TiONs concept 1 DynamicS program power, both channelS DriVen, 8 ohm 50 w + 50 w DynamicS program power, both channelS DriVen, 4 .
INFO@AP ART -A UDIO .COM 11 CONCEPT1 & CONCEPT1T TEChNiCal sPECifiCa TiONs imD < 0,09% noiSe a-weighteD > 100 Dba gain 33 Db Damping factor > 100 protection SyStemS Dc, temp , clip , oVer.
WWW .AP ART -AUDIO .COM 12 ANY SUGGESTION? They are well appreciated and eventually rewarded! Send your ideas or suggestions to suggestions@apart-audio.com CONCEPT1 is developed by Audioprof nv Lanteernhofstraat 90 BE-2100 Deurne BELGIUM • Please check the carton box for any kind of damage on reception of the goods.
An important point after buying a device APart CONCEPT1T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought APart CONCEPT1T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data APart CONCEPT1T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, APart CONCEPT1T you will learn all the available features of the product, as well as information on its operation. The information that you get APart CONCEPT1T will certainly help you make a decision on the purchase.
If you already are a holder of APart CONCEPT1T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime APart CONCEPT1T.
However, one of the most important roles played by the user manual is to help in solving problems with APart CONCEPT1T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device APart CONCEPT1T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
