Instruction/ maintenance manual of the product SAS-DVR1004 Konig
Go to page of 58
S A S-DVRSET35/45 SAS -DVR1004 /1008/1016 SAS-CAM11 x 0/12 x 0 MANUAL.
ENGLISH 2 Contents SAFETY INSTRUCTION ............................................................................................................. 5 CHAPTER 1 : FEATURES AND FUNCTIONS ..................................................................
ENGLISH 3 5.2.4.5 Email set ................................................................................................................................ 27 5.2.4.6 DDNS Set ..........................................................................
ENGLISH 4 6.3.3.6 System ................................................................................................................................... 47 6.3.3.7 Advanced ..........................................................................
ENGLISH 5 Safety Instruction 1. Read Instruction All the safety and operating instruction should be read before the equipment is operated. 2. Power sources This equipment should be operated only from the type of power source indicated on the marking label.
ENGLISH 6 Chapter 1: Features and Functions Function Brief and Description Real time monitoring Double video output; with monitor, VGA virtual output port or HDMI Output; Support net-viewer and MP live surveillance and also support zoom in/out, auto sequence and PIP display.
ENGLISH 7 Chapter 2: Overview 2.1 4CH DVR Front Panel Item Key title /Indicator Marks Function 1 HDD indicator HDD When the “Red” indicator ashes it means the hard drive is being read or writte.
ENGLISH 8 2.2 4CH DVR Rear Panel Item Physical port Connection method 1 Video input Connect video input device (BNC interface) 2 Video output Connect monitor output(BNC interface) 3 Audio Input 4CH au.
ENGLISH 9 2.3 4CH Remote Controller Item Key title Key function 1 Mute Mute on/o 2 ALL Multiple display mode 3 1-8 9, 0 Channel select 1-8 Clicking numeric “0” allows you switch to output devic.
ENGLISH 10 2.4 Mouse Operation Except using buttons of front panel or remote controller, you also can use mouse to perform system operation. TYPE Function Click left key of Mouse In menu lock mode, en.
ENGLISH 11 Chapter 3: DVR CONNECTION 3.1 HDD Installation Caution: Please do not Install or take out hard drive when DVR is running! HDD Installation: (1) Cut power rstly, and then remove screws an.
ENGLISH 12 4.2 Live Interface Picture 4-2 After nishing initialization the system will enter into <Live> screen. Picture 4-2 is the 16-split display defaulted by system, which is showing no video input status. Once there are video inputs, the screen will display live images from the cameras.
ENGLISH 13 5.1 Main Menu Guide Search Record Search Record Playback Event Search Display Main Menu Live set Privacy zone Backup Clip Set Record Parameters Schedule Main St ream Record Sub stream Netwo.
ENGLISH 14 5.2 Main Menu Picture 5-2 On <Live> mode, click [Menu] button on the front panel or Remote controller to enter into Main menu interface shown as Picture 5-2.
ENGLISH 15 5.2.1.2 Output mode Go to [Main menu Display Output] to enter into the output set interface shown as Picture5-5. Go to [Main menu Display Output] to enter into the output set interface shown as Picture 5-5. Click [Live] to pop up the interface shown as Picture 5-6.
ENGLISH 16 ¾ Transparency: allow you adjust menu’s transparency, and its range is 1~128. ¾ Margin: allow you adjust the whole screen’s margin. Details operations please refer to the Picture 5-10. Volume: allow you adjust the DVR volume shown as Picture 5-11.
ENGLISH 17 5.2.2 Record set 5.2.2.1 Record parameters Picture 5-14 Click [Main menu Record Record Para] to enter into the interface shown as Picture 5-14.
ENGLISH 18 5.2.2.3 Main Stream Go to [Main menu Record Main Stream] to enter into the interface shown as Picture 5-16. Picture 5-16 ¾ Resolution: support 960H and D1. 960H: includes WD1, WHD1 and WCIF; D1: include D1, HD1 and CIF ¾ Frame rate: PAL: 1-25 f/s; NTSC: 1-30 f/s.
ENGLISH 19 ¾ Time Search: In the <Search screen>, user can search for a specic date and time for a recording and view it in Playback mode. This is useful for hunting a specic recording of an incident if you know the date and time it occurred.
ENGLISH 20 5.2.3.3 Time Axis setup, le clip and zoom in/out 1) The DVR supports the processing control bar function when playing back record les shown as Picture 5-19A (Up to 4CH is available). 2) Click [ ] icon beside the processing bar to pop up the interface shown as Picture5-19A-1.
ENGLISH 21 • Record Clip and backup function and Zoom in/out function Picture 5-19B-2 Picture 5-19C ¾ Clip and backup: When one channel is playing-back, the [ ] icon will appear in the [Play control] bar shown as Picture 5-19B-1.
ENGLISH 22 5.2.3.5.1 back-up le based on event In the [File List] mode, if you wish to backup records, please tick-select the BAK check-boxes which correspond to the records and click [Backup] button to enter into the below windows illustrated in Picture 5-21.
ENGLISH 23 Picture 5-25 Picture 5-26 Play button: click the icon to playback the backup record Pause button: click the icon to pause the backup record Stop button: click the icon to stop the backup record Next: Click the icon to play next record Prev.
ENGLISH 24 5.2.3.6 Log Search Go to [Main menu Search Log] option to enter into the Log search interface shown as Picture 5-28. Herein allow you preview the log information you have searched. And click [Backup] to export all the log information which is listed.
ENGLISH 25 5. Visit a remote DVR http: // public net IP: HTTP port (such as: 19010) http: //intranet IP: HTTP port (such as: 19010 - only use for Intranet) 6. Input the IP address of your domain name server Friendly Reminder: 1. All the parameters you set are available only when you click [Apply] and after system are restarted.
ENGLISH 26 Picture 5-34 When selecting 3G from the Type. Details please follow below steps: 1. Input Mobile Port (China Telecom:#777;Others: *99#) 2. Click <Apply>. System will automatically capture IP. 3. Enter IP address:web port to visit DVR remotely.
ENGLISH 27 Picture 5-35 Friendly Reminder: The router’s port forwarding interface may be dierent, however, when entering into virtual server, user will always need forward port (range: 1025~65535.
ENGLISH 28 Picture 5-38 ¾ Sender address: indicates sender’s email address. The email address should be consistent with the server you use. That is to say, when you use email address – aaa@gmail.com, the according server should be smtp.gmail.com.
ENGLISH 29 ¾ Buzzer time: you can set how long the buzzer will sound when motion is detected (o, 10s, 30s, 40s, 60s). ¾ Send Email: Allows you set the alarm images is issued to a specied email. ¾ Full screen Alarm: The function is defaulted to “On”.
ENGLISH 30 ¾ Record Channel: allow you select channels you want to record. ¾ Post Recording: you can set how long alarm record will last when alarm ends (30s,1minute, 2minutes, 5minutes). ¾ Copy: allow you copy all the setting of one channel to other ones.
ENGLISH 31 ¾ Auto-overwrite: When set to ENABLE the DVR will record over the oldest les on the hard drive. The DVR will always be able to record events as they happen, however, it does means that .
ENGLISH 32 5.2.7 System 5.2.7.1 General Click [Main Menu System General] to enter into the interface shown as Picture 5-49 Picture 5-49 You will be allowed to modify system date/time, date/time format, time zone, language, video format and menu time out.
ENGLISH 33 The model supports up to seven users with one Admin and six users. Click [Edit] button to enter into the [User Edit] interface shown as Picture 5-53. And input user name and password. Select one <common user> and click <Apply>, and then enter into <Authority set> interface shown as Picture 5-54.
ENGLISH 34 Picture 5-56 ¾ Auto Reboot: You can enable the auto maintain function regularly as per user’s need. ¾ System Upgrade: After decompressing update le package, copy the le named “dvrupgrade” to root directory of U ash disk; Insert the U ash disk into USB port of DVR; Click <Upgrade>.
ENGLISH 35 Picture 5-59 Friendly Reminder: Administrator has full authority over Main Menu operations and has an authority to limit common user’s operation. 5.4 Split mode The model displays 4/8 live images in the sequence of single, 4-split and 9-split modes.
ENGLISH 36 5.6 PIP Mode You can display a Picture-in-Picture in live mode. PIP has two display modes, including 1x1 display mode and 1x2 display mode. 1x1 display mode 1x2 display mode 5.7 Record Search You could enter into [Record Search] menu from Pop-up menu conveniently and quickly and search/playback the record histories.
ENGLISH 37 Chapter 6: Web Application Manager 6.1 ActiveX control download and installation Open your web browser and input the IP address and web port of DVR, such as:http://172.18.6.202:8080/. If your computer is connected to internet, it will download and install “ActiveX” Plug-in automatically.
ENGLISH 38 Picture 6-1 If running the web application for the rst time, you need about one minute to nish download and install the ActiveX controls, please wait patiently.
ENGLISH 39 6.3 Live interface After successful logging-in web manager, you will enter into the Live interface shown as Picture 6-3 Picture 6-3 6.3.1 Menu Bar Menu bar include [Live], [Replay], [Conguration], [Path Conguration] and [Logout] options 6.
ENGLISH 40 6.3.1.2 PTZ Control Picture 6-5 ① PTZ moving Direction control: allow you control PTZ camera’s direction. And the middle button is called [Auto-cruise] button. ② : PTZ speed control bar ③ : Iris, Focus and Zoom control ④ : Preset setting/clear; Start cruise/stop cruise 6.
ENGLISH 41 6.3.2.1 Record search Firstly, select one day you want to check and tick-select <Synchronous playback> and the channels you desire to playback shown as Picture 6-8. Picture 6-8 Secondly, select record type (Normal record, Alarm record and All) and then click < > button shown as Picture 6-9.
ENGLISH 42 Detail brief description is shown as below list Key Description Key Description Play Open/close audio Pause Volume adjust Stop Playback control bar (x1/2,1/4,1/8, normal, x2, x4, x8) By fra.
ENGLISH 43 Record le download Click [ ] icon to enter into the below interface shown as Picture 6-12. Picture 6-12 Tick-select the record le you want to download and click [Start download]. System will download the record le in turn and save to local PC.
ENGLISH 44 6.3.3.2 Record Click <Record> option to unfold its sub-options: Record parameter, Schedule and Main stream. Picture 6-15 Picture 6-16 Picture 6-17 1. Record Parameters: Under [Record parameters] option, allow you set channel, record enable, pack time and Pre-record status shown as Picture 6-15; 2.
ENGLISH 45 Picture 6-19 Picture 6-20 2. Sub stream (shown as Picture 6-21): Relative parameters should be consistent with DVR local setting. Picture 6-21 3. Email setting: Click [Email setting] option to allow you set alarm email conguration parameters shown as Picture 6-22.
ENGLISH 46 6.3.3.4 Alarm Set Click <Alarm> option to unfold its sub-options: Motion, I/O Alarm shown as Picture 6-24. Picture 6-24 1. Motion Detection: allow you congure its <Sensitivity>, <Alarm out>, <Alarm record> and <Alarm Capture> etc.
ENGLISH 47 6.3.3.5 Device Click <Device> to unfold its sub-options: HDD and PTZ. 1. HDD: Allow you check out HDD status and overwritten time shown as Picture 6-27.
ENGLISH 48 2. Users: Allow you congure user name and password shown as Picture 6-30. Details setting should be consistent with DVR local setting. Picture 6-30 3. Information: Allow you check out device name, number, type, MAC address, software version, IE version and hardware version shown as Picture 6-31.
ENGLISH 49 Please follow below steps to upgrade the system: a. Select the upgrade le’s path shown as Picture 6-33. Please note that the format of upgrade le is *.sw. Picture 6-33 b. Click <Start update>, now processing bar will display current upgrade status shown as Picture 6-34.
ENGLISH 50 3. Events: Allow you congure abnormal type, buzzer output time, and alarm email and show message shown as Picture 6-36. Details setting should be consistent with DVR local setting. Picture 6-36 4. Maintain: Allow you set auto system maintain for DVR remotely shown as Picture 6-37.
ENGLISH 51 Chapter 7: Appendix 7.1 Operation Function Table Type Title Description Basic setting Time setting Set system date/time, display format and day-light saving time.
ENGLISH 52 Type Title Description Network Function Live display Rea-time video surveillance remotely. Remote record Set record mode and status of DVR remotely. Remote playback Check local record history via network. PTZ control Remotely control PTZ camera, position, focus, zoom and iris etc.
ENGLISH 53 7.2 Record Alarm setting Under the record mode, [ ] icon or [ ] icon will appear on the screen, and alarm will be issued. You have congured record type to <Normal> on the <Sched.
ENGLISH 54 7.4 Troubleshooting 1. Q: What can I do if the system does not detect the HDD? A: Check if the power supply system is properly connected and data cord and power cables are securely connected.
ENGLISH 55 7.6 System Connection Diagram To camera input To DC 12 V input Connect divider cable to power supply Max. 4 camera inputs for 1004; 8 for 1008; 16 for 1016 To AC 220 V power outlet Connecti.
ENGLISH 56 Chapter 8: Cameras SAS-CAM1100 /1110 , 1200/1210 Specications: • Image chip: 1/4” CMOS • Lens: 3 . 6 0 mm • Horizontal resolution: 700 TVL • View angle: 45° • Infrared LED: 2 4 pcs, 5~10 M • Light sensitivity: 1.5 lux • Electronic shutter: 1/50(1/60)~1/100,000 sec.
ENGLISH 57 • Light sensitivity: 1.5 lux • Electronic shutter: 1/50(1/60)~1/100,000 sec. • S/N ratio: > 48 dB • Gain: auto • Gamma correction: > 0.
ENGLISH 58 Chapter 10: General information Warranty: Any changes and/or modications to the product will void the warranty. We cannot accept any liability for damage caused by incorrect use of this product. Disclaimer: Designs and specications are subject to change without notice.
An important point after buying a device Konig SAS-DVR1004 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Konig SAS-DVR1004 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Konig SAS-DVR1004 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Konig SAS-DVR1004 you will learn all the available features of the product, as well as information on its operation. The information that you get Konig SAS-DVR1004 will certainly help you make a decision on the purchase.
If you already are a holder of Konig SAS-DVR1004, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Konig SAS-DVR1004.
However, one of the most important roles played by the user manual is to help in solving problems with Konig SAS-DVR1004. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Konig SAS-DVR1004 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
