Instruction/ maintenance manual of the product 1050E Konica Minolta
Go to page of 190
Chapter 1 : Introduction Chapter 2 : Overview of the Scanning Features Chapter 3 : Before Using the Scanning F eatures Chapter 4 : About the Copied Data Processing Features Chapter 5 : About the Netwo.
bizhub PRO 1050/1050e Scanner i Table of contents 1 Introduction 1.1 Introduction . ................. ................. ................ ................. ................. .. 1-2 1.1.1 ACKNOWLEDGEMENTS: .... ................. ................. ......
ii bizhub PRO 1050/1050e Scann er 4 About the Copied Data Processing Features 4.1 Overview of the STO RE/RECALL Features .. ................. ..................4-2 4.1.1 About folders and boxes .......... ...... ..... ................. ...............
bizhub PRO 1050/1050e Scanner iii 6.2 Registering an E-Mail Add ress .................. ................ .................... .. 6-4 6.3 Registering the HDD-B ... ............................ ................................. ..... 6-6 6.4 Registering the FTP server .
iv bizhub PRO 1050/1050e Scann er 11 Utility Tools 11.1 PageScope JobEdit or ...................... .............. ................. ................11-2 11.1.1 How to use PageScope JobEditor . ................... ................. ...........11-3 11.
1 Introducti on Chapter 1 Introduction.
1 Introduction 1-2 bizhub PRO 1050/1050e Scanner Introducti on Chapter 1 1 Introduction 1.1 Intro duction Thank you very much for purchasing the bizhub PRO 1050/105 0e.
Introduction 1 bizhub PRO 1050/1050e Scanner 1-3 Introducti on Chapter 1 1.1.3 OpenSSL Statement OpenSSL License Copyright (c) 1998-2000 The OpenSSL Project. All ri ghts reserved. Redistribution and use in source and bi nary forms, with or without modifica- tion, are permitted provided that the following con d itions are met: 1.
1 Introduction 1-4 bizhub PRO 1050/1050e Scanner Introducti on Chapter 1 Original SSLeay License Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@crypt- soft.com).
Introduction 1 bizhub PRO 1050/1050e Scanner 1-5 Introducti on Chapter 1 GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILI- TY, WH.
1 Introduction 1-6 bizhub PRO 1050/1050e Scanner Introducti on Chapter 1 1.2 Composition of User's Guide This machine is provided with the follo wing user's guides as printed matters. User's Guide - Copier This guide describes an outline of the machine and copy operations.
Introduction 1 bizhub PRO 1050/1050e Scanner 1-7 Introducti on Chapter 1 1.3 About this Manual This manual is the User's Guide for bizhub PRO 1050/105 0e Network Scan- ner features. This manual describes the following features operated on the Control Panel.
1 Introduction 1-8 bizhub PRO 1050/1050e Scanner Introducti on Chapter 1 1.3.1 Manual Composition This manual is composed of the following 12 chapters: Chapter 1 Introduction This chapter describes this User's Guide.
Introduction 1 bizhub PRO 1050/1050e Scanner 1-9 Introducti on Chapter 1 1.3.2 Conventions Used in this Manual Notation of each product The following abbreviations are used in this m anual: 1 bizhub P.
1 Introduction 1-10 bizhub PRO 1050/1050e Scann er Introducti on Chapter 1 1.3.3 Utility Tools of This Product The utility tools used in the Network Scanner featu res are as follows. For more information on how to operate the utility tools, refer to t he User's Guide for the each or the correspon ding pages of this manual.
Introduction 1 bizhub PRO 1050/1050e Scanner 1-11 Introducti on Chapter 1 1.3.4 How to read this Manual 6 Configuring Destination for the Network Scanner Features 6.2 Registering an E-Mail Address When using the function to send the scanned data as an E-Mail attached file, you can register the destination E-Mail address in advance.
.
2 Overview of the Scan ning Features Chapter 2 Overview of the Scanning Features.
2 Overview of the Scanning Features 2-2 bizhub PRO 1050/1050e Scanner Overview of the Scan ning Features Chapter 2 2 Overview of the Scanning Features 2.1 Overview of Features and Connection Modes The copier has the Network Scanner features and the Copied Data Process- ing Features.
Overview of the Scanning Features 2 bizhub PRO 1050/1050e Scanner 2-3 Overview of the Scan ning Features Chapter 2 2.1.2 Copied Data Processing Features The Copied Data Proces sing features enable you.
2 Overview of th e Scanning Features 2-4 bizhub PRO 1050/1050e Scanner Overview of the Scan ning Features Chapter 2 ! Detail For more information on the Copied Data Processing Features, refer to "About the Copied Data Proce ssing Features" on Page 4-2.
Overview of the Scanning Features 2 bizhub PRO 1050/1050e Scanner 2-5 Overview of the Scan ning Features Chapter 2 2.1.3 Network Scanner Features The Network Scanner features ena ble the followings by converting a scanned document to digital data. The Network Scanner features are op era ted by using the [SCAN] tab.
2 Overview of th e Scanning Features 2-6 bizhub PRO 1050/1050e Scanner Overview of the Scan ning Features Chapter 2 2.2 Product Specifications For information on the prod uct specifications of the copier, the print control- ler and the network, refer to the User's Guide for the each or contact your administrator for the each.
3 Before Using the Scanning Feat ures Chapter 3 Before Using the Scanning Features.
3 Before Using the Scanning Featu res 3-2 bizhub PRO 1050/1050e Scanner Before Using the Scanning Feat ures Chapter 3 3 Before Using the Scanning Features 3.1 About the Con trol Pan el For detailed information on names and functions of variou s parts of the Con- trol Panel, refer to the User's Guide (Copy).
Before Using the Scann ing Features 3 bizhub PRO 1050/1050e Scanner 3-3 Before Using the Scanning Feat ures Chapter 3 8 Star t LED lights in green wh en machine operation is available, and turns red if any operation cannot be started. 9 [C] (Clear quantity) allows resetting of print quantity.
3 Before Using the Scanning Featu res 3-4 bizhub PRO 1050/1050e Scanner Before Using the Scanning Feat ures Chapter 3 3.2 How to operat e the Touch Panel To operate the Copied Data Processing Features/Network Scanner features , use the Touch Pa nel of the copier.
Before Using the Scann ing Features 3 bizhub PRO 1050/1050e Scanner 3-5 Before Using the Scanning Feat ures Chapter 3 ! Detail You may also input values through the Keypad on the Control Panel. For more information on how to input characters, refer to "How to Input Characters" on Pa ge 3-6.
3 Before Using the Scanning Featu res 3-6 bizhub PRO 1050/1050e Scanner Before Using the Scanning Feat ures Chapter 3 3.3 How to Input Characters As you touch the item where you can input characters, the character input screen appears. You can input alphabets an d signs.
Before Using the Scann ing Features 3 bizhub PRO 1050/1050e Scanner 3-7 Before Using the Scanning Feat ures Chapter 3 3.4 How to Search The Copied Data Proce ssing Features/Network Scan ner features enables you to search th e registered destination and specif ied storage location by their names.
3 Before Using the Scanning Featu res 3-8 bizhub PRO 1050/1050e Scanner Before Using the Scanning Feat ures Chapter 3 3.4.2 Searching a box/file In the Copied Data Processing Features, you can searc h quickly the desired box out of the boxes created on the HDD-A b y its Box No.
Before Using the Scann ing Features 3 bizhub PRO 1050/1050e Scanner 3-9 Before Using the Scanning Feat ures Chapter 3 ! Detail Pressing the [Cancel] key ca ncels the input Box No., and the No. Search screen closes. If a password is configured for the box, you need to enter the password.
3 Before Using the Scanning Featu res 3-10 bizhub PRO 1050/1050e Scann er Before Using the Scanning Feat ures Chapter 3 4 Input the File Name and press the [OK] key . – When a corresponding file does not exist, the message "Failed direct call " appears.
Before Using the Scann ing Features 3 bizhub PRO 1050/1050e Scanner 3-11 Before Using the Scanning Feat ures Chapter 3 3.5 Thumbnail When transmitting or outputting the da ta stored in the HDD-A, contents of the data can be confirmed in advance by displaying the thumbnail.
.
4 About the Copie d Data Processing Featur es Chapter 4 About the Copied Data Processing Features.
4 About the Copied Data Processing Features 4-2 bizhub PRO 1050/1050e Scanner About the Copie d Data Processing Featur es Chapter 4 4 About the Copied Data Processing Fea- tures 4.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-3 About the Copie d Data Processing Featur es Chapter 4 ! Detail PageScope JobEditor and PageScope JobEditorServer for USA are ex- cluded. About how to obtain PageScope Jo bEditor and PageScope JobEditorS- erver, contact your service representative.
4 About the Copied Data Processing Features 4-4 bizhub PRO 1050/1050e Scanner About the Copie d Data Processing Featur es Chapter 4 4.1.1 About folders and boxes Copied data are managed by boxes created in fo lders on the HDD-A.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-5 About the Copie d Data Processing Featur es Chapter 4 Types of a folder, box and file ! Detail For more information on the Secure Folder, refer to Chapter "9 About the Secure Folder".
4 About the Copied Data Processing Features 4-6 bizhub PRO 1050/1050e Scanner About the Copie d Data Processing Featur es Chapter 4 4.2 About Screens of th e STORE/RECALL Tabs Screens of the STORE/REC.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-7 About the Copie d Data Processing Featur es Chapter 4 4.3 Registering a Personal Folder A Personal Folder is registered (created) for each user, wh ere you manage data you want to STORE/RECALL.
4 About the Copied Data Processing Features 4-8 bizhub PRO 1050/1050e Scanner About the Copie d Data Processing Featur es Chapter 4 4 Press the [New Register] key. 5 Press the [Folder Name Input] key to display the ch aracter input screen. Input an y Folder Name.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-9 About the Copie d Data Processing Featur es Chapter 4 7 Press the [OK] key. The box list screen appears. 8 If you register only a folder, press the [Cancel] key to go to the step 9.
4 About the Copied Data Processing Features 4-10 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 4.4 Deleting a Pe rsonal Folder To delete a registered Personal Fol d er, follow the steps below. 1 Select the [RECALL] tab.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-11 About the Copie d Data Processing Featur es Chapter 4 4 Press the [Folder Delete] key. – If a Password is not configured for the Folder, a screen ap- pears and confirms you whether to delete the folder.
4 About the Copied Data Processing Features 4-12 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 4.5 Creating a Bo x (Personal Folder/Public Folder) The copied data are ma naged in boxes created in the folders of the HDD-A (Personal Folder/Public Folder).
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-13 About the Copie d Data Processing Featur es Chapter 4 – For more information on the types of folder, refer to "Overview of the STORE/RECALL Features" on Page 4-2.
4 About the Copied Data Processing Features 4-14 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 If you do not register a Box Na me, the Box No. becomes the Box Name. 6 If you configure a Password for a box, press the [Password Input] key to display the character input screen.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-15 About the Copie d Data Processing Featur es Chapter 4 9 If you register only a box, press the [Return] and go t o the step 10. If you go on to store data on the HDD-A, go to the step 5 of “Scan- ner to HDD” on Page 4-22.
4 About the Copied Data Processing Features 4-16 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 4.6 Deleting a Box (Personal Folder/Public Folder/Secur e Folder) Delete a box in the following steps. 1 Select the [RECALL] tab.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-17 About the Copie d Data Processing Featur es Chapter 4 – When you select a Secure Folder Press the [Secure Folder] key.
4 About the Copied Data Processing Features 4-18 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 – When you select a Personal Folder – When you sel ect a Public Fold- er – When you select a Secure Folder If a Password is configured for the box, the Password input screen appears.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-19 About the Copie d Data Processing Featur es Chapter 4 6 Press the [Yes] key.
4 About the Copied Data Processing Features 4-20 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 4.7 Selecting a St orage Location If you want not to print but to store copied data, select a storage location by using the [STORE] tab.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-21 About the Copie d Data Processing Featur es Chapter 4 2 Press the [Scanner to HDD] key. 3 Select a folder in which you store data. – When you select a Personal Folder – Press the [Personal Folder] key to display the list.
4 About the Copied Data Processing Features 4-22 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 – In case of Public Folder – Press the [No. Search] key and enter a Box No. to select a box by Box No.. For more informa- tion, refer to "No.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-23 About the Copie d Data Processing Featur es Chapter 4 8 Set an original and press the [ Start] button. The original is scanned, and the copied data are stored in a speci fied box.
4 About the Copied Data Processing Features 4-24 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 Scanner to PC You can transmit copied data from the copier to a computer to store them by using PageScope JobEditor/PageS cope JobEdito rServer.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-25 About the Copie d Data Processing Featur es Chapter 4 Store copied data in a comp uter in the following steps. 1 Select the [STORE] tab. 2 Press the [Scanner to PC] key. The setting screen appears.
4 About the Copied Data Processing Features 4-26 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 5 Connect to the copier through Page Scope Jo bEditor installed on the computer, and store the copied da ta. PageScope JobEditorServer re- ceives data automatically.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-27 About the Copie d Data Processing Featur es Chapter 4 HDD to PC You can transmit c opied data stored on the HDD-A to a computer to store them by using PageScope JobEditor/P ageScop e JobEditorServer or FTP/ SMB.
4 About the Copied Data Processing Features 4-28 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 3 Select a Folder. – When you select a Personal Folder – Press the [Personal Folder] key to display the list. Select any folder and pres s the [OK] key.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-29 About the Copie d Data Processing Featur es Chapter 4 – In case of Public Folder – If a Password is configure d for the box, the Password input screen appear s. Enter the Password.
4 About the Copied Data Processing Features 4-30 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 7 Confirm the File Name, FTP Ad- dress, SMB Address and select File Form and press [OK] key.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-31 About the Copie d Data Processing Featur es Chapter 4 4.8 About the Copied Data Storage Setting Screen On the Copied Data Storage Setting scre en, such settings as original set- tings and quality settin gs can be configured.
4 About the Copied Data Processing Features 4-32 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 Special Image Pressing the [Speci al Image] key ena- bles you to configure the following set- tings.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-33 About the Copie d Data Processing Featur es Chapter 4 Application Annotation Pressing the [Annotation ] key enables you to configure the following settings. Frame/Folder Eraser Pressing the [Frame/Folder Eraser] key enables you to configure the following settings.
4 About the Copied Data Processing Features 4-34 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 4.9 Changing Data Transmission Method to PC There are 3 methods to transmit copied data to the computer: [Transmit to PC], [Operate on PC] and [FTP/SMB].
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-35 About the Copie d Data Processing Featur es Chapter 4 ! Detail An administrator needs to speci fy the IP Address of the target c omputer on the copier. For more informat ion, contact your administrator.
4 About the Copied Data Processing Features 4-36 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 3 Press the [Transmit to PC] key. – If you have not spec ified a tar- get computer on the copier, you cannot select the [Trans- mit To PC] key.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-37 About the Copie d Data Processing Featur es Chapter 4 Operate on PC If you configure the receiving operat ion on a PC, the computer with Page- Scope JobEditor can receive copied da ta.
4 About the Copied Data Processing Features 4-38 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 3 Press the [Operate on PC] key.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-39 About the Copie d Data Processing Featur es Chapter 4 FTP/SM B By setting the FTP/SMB in advance, copied da ta stored in the HDD-A can be converted to PDS/TIFF data and transmi tted to the FTP server or SMB serv- er.
4 About the Copied Data Processing Features 4-40 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 4 Press the [OK] key to close the screen.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-41 About the Copie d Data Processing Featur es Chapter 4 4.10 Output from the HDD-A Co pie d da ta s tor ed o n th e HD D-A wit h the [STORE] tab or secure print jobs transmitted from a computer can be output using the [RECALL] tab.
4 About the Copied Data Processing Features 4-42 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 – When you select Secure Fold- er – Press the [Secure Folder] key. – For more info rmation on the types of folder, refer to "Over- view of the STORE/RECALL Features" on Page 4-2.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-43 About the Copie d Data Processing Featur es Chapter 4 formation, refer to "No. Search" on Page 3-8. – If you know the target file, press th e [Direct Call] key to specify the location directly.
4 About the Copied Data Processing Features 4-44 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 7 To continue recalling data, press the [Yes] key. To finish recalling data, press the [No] key. – Pressing the [Yes] key displays the file list screen.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-45 About the Copie d Data Processing Featur es Chapter 4 4.11 About the Recall Ta b’s Output Setting Screen On the Recall Tab’s Ou tput Setting screen, you can configure the settin gs for outputting stored copied data or secure output print jobs.
4 About the Copied Data Processing Features 4-46 bizhub PRO 1050/1050e Scann er About the Copie d Data Processing Featur es Chapter 4 Auto Output If this key is pressed, the output start s without pressing the start butt on.
About the Copied Data Processing Feat ures 4 bizhub PRO 1050/1050e Scanner 4-47 About the Copie d Data Processing Featur es Chapter 4 The flow of operation of the Wait Output and Proof Output Change settings Change settings Output the one sheet for a confirmation Exit the operation as it is.
.
5 About the Netw ork Scanner Features Chapter 5 About the Network Scanner Features.
5 About the Network Scanner Features 5-2 bizhub PRO 1050/1050e Scanner About the Netw ork Scanner Features Chapter 5 5 About the Network Scanner Features 5.1 Overview of the Ne twork Scanner Features The Network Scanner featur es to use the intern al HDD (HDD-B) of the print controller are operated on the SCAN tab sc reen.
About the Network Scanner Features 5 bizhub PRO 1050/1050e Scanner 5-3 About the Netw ork Scanner Features Chapter 5 ! Detail "About the Scanner Setting Basic Screen" .. p.7-26 To use the copier as a network sca nner, it needs to be connected to the network.
5 About the Network Scanner Features 5-4 bizhub PRO 1050/1050e Scanner About the Netw ork Scanner Features Chapter 5 5.2 Send by an E-Mail You can send the data re ad in from the copier's ADF or the original scann ing glass (scanned data) to an E-Mail ad dress as an attach ed file.
About the Network Scanner Features 5 bizhub PRO 1050/1050e Scanner 5-5 About the Netw ork Scanner Features Chapter 5 ! Detail When the E-Mail is in excess of the maximum transmission size that has been set, it is not sent to the SMTP server, but cancelled on the bizhub PRO 1050/1050e.
5 About the Network Scanner Features 5-6 bizhub PRO 1050/1050e Scanner About the Netw ork Scanner Features Chapter 5 5.3 Store on the HDD-B In order to store the data read in from the copier's ADF or the original sca n- ning glass (scanned data) on the HDD-B, you need to configu re boxes on the HDD-B in advance.
About the Network Scanner Features 5 bizhub PRO 1050/1050e Scanner 5-7 About the Netw ork Scanner Features Chapter 5 5.4 Send to the FTP se rver You can send the data re ad in from the copier's ADF or the original sc anning glass (scanned data) to the FTP server.
5 About the Network Scanner Features 5-8 bizhub PRO 1050/1050e Scanner About the Netw ork Scanner Features Chapter 5 You can register a Host Address, File Path, Login Name and Password in ad- vance. For information on how to regist er them, refer to "Registering the FTP server" on Page 6-9.
About the Network Scanner Features 5 bizhub PRO 1050/1050e Scanner 5-9 About the Netw ork Scanner Features Chapter 5 5.5 Send to the SMB server You can send the data re ad in from the copier's ADF or the original sc anning glass (scanned data) to the SMB server.
5 About the Network Scanner Features 5-10 bizhub PRO 1050/1050e Scann er About the Netw ork Scanner Features Chapter 5 2 Reminder Depending on a network co ndition, transmission to the SMB server may damage the scanned data. Make sure that the sca nned data are not damaged.
About the Network Scanner Features 5 bizhub PRO 1050/1050e Scanner 5-11 About the Netw ork Scanner Features Chapter 5 5.6 Send to a Group If you register multiple destinations/storage locati ons as a Group, you ca n send/store the data read in from the copier's ADF or the original scanning glass (scanned data) to them at one time.
5 About the Network Scanner Features 5-12 bizhub PRO 1050/1050e Scann er About the Netw ork Scanner Features Chapter 5 5.7 Use the Networ k Scanner Features To scan data using the Network Scanne r features, follow the flow below.
6 Configuring Destination for the Network Scanner Features Chapter 6 Configuring Destination for the Network Scanner Features.
6 Configuring Destination for the Network Scanner Featu res 6-2 bizhub PRO 1050/1050e Scanner Configuring Destination for the Network Scanner Features Chapter 6 6 Configuring Destination for the Network Scanner Features 6.
Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-3 Configuring Destination for the Network Scanner Features Chapter 6 6.1.2 The keys on the Destination Manual Input screen You can register a destination in the Dest ination Manual Input screen.
6 Configuring Destination for the Network Scanner Featu res 6-4 bizhub PRO 1050/1050e Scanner Configuring Destination for the Network Scanner Features Chapter 6 6.2 Registering an E-Mail Address When using the function t o send the sc anned data as an E-Mail attached file, you can register the destination E-Mail address in advance.
Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-5 Configuring Destination for the Network Scanner Features Chapter 6 4 Configure the necessary items on the Manual Address screen. Pressing an each item displays the character input screen.
6 Configuring Destination for the Network Scanner Featu res 6-6 bizhub PRO 1050/1050e Scanner Configuring Destination for the Network Scanner Features Chapter 6 6.3 Registering the HDD-B If you want to store the scanned data on the HDD-B, you need to register boxes on the HDD-B.
Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-7 Configuring Destination for the Network Scanner Features Chapter 6 your administrator of the copier. The Manual Address scre en appears. 4 Configure the necessary items on the Manual Address screen.
6 Configuring Destination for the Network Scanner Featu res 6-8 bizhub PRO 1050/1050e Scanner Configuring Destination for the Network Scanner Features Chapter 6 5 Press the [Register] key. Pressing this key brings you back to the Select Destinations/Storage Locations screen (HDD).
Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-9 Configuring Destination for the Network Scanner Features Chapter 6 6.4 Registering the FTP server If you want to send t he scanned data to the FTP server, you can register the destination FTP server.
6 Configuring Destination for the Network Scanner Featu res 6-10 bizhub PRO 1050/1050e Scann er Configuring Destination for the Network Scanner Features Chapter 6 4 Configure the necessary items on the Manual Address screen. Pressing an each it em displays the character input screen .
Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-11 Configuring Destination for the Network Scanner Features Chapter 6 6 Make sure that th e registered Name is displayed. ! Detail If the desired Name is not di splaye d on the page, pre ss [ ▼ ] / [ ▲ ] to switch between pages.
6 Configuring Destination for the Network Scanner Featu res 6-12 bizhub PRO 1050/1050e Scann er Configuring Destination for the Network Scanner Features Chapter 6 6.5 Registering the SMB server If you want to send the scanned data to the SMB server, you can register the destination SMB server.
Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-13 Configuring Destination for the Network Scanner Features Chapter 6 The Manual Address scre en appears. 4 Configure the necessary items on the Manual Address screen.
6 Configuring Destination for the Network Scanner Featu res 6-14 bizhub PRO 1050/1050e Scann er Configuring Destination for the Network Scanner Features Chapter 6 6 Make sure that the registered Name is displayed. ! Detail If the desired Name is not di splayed on the page, press [ ▼ ] / [ ▲ ] to switch between pages.
Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-15 Configuring Destination for the Network Scanner Features Chapter 6 6.6 Registering a Group If you want to send the scanned data to multiple destinations/storage loca- tions, you can register them as a Group.
6 Configuring Destination for the Network Scanner Featu res 6-16 bizhub PRO 1050/1050e Scann er Configuring Destination for the Network Scanner Features Chapter 6 4 Press the [Group Name] key, and input a Group name on the char- acter input screen.
Configuring Destination for the Network Sca nner Features 6 bizhub PRO 1050/1050e Scanner 6-17 Configuring Destination for the Network Scanner Features Chapter 6 9 Make sure that th e registered Name is displayed.
.
7 Using the Network Sca nner Features Chapter 7 Using the Network Scanner Features.
7 Using the Network Scanner Features 7-2 bizhub PRO 1050/1050e Scanner Using the Network Sca nner Features Chapter 7 7 Using the Network Scanner Features 7.1 The keys on the Select Destinations/Storage Loca- tions Screen In order to run scanning, you need to specify a destination/storage location to which you send the scan ned data.
Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-3 Using the Network Sca nner Features Chapter 7 Button Function [A-C] - [W-Z] k ey (Index key) When this key is pr essed, the first alphabet characte r of the reg- istered name corresponding to the key is displayed.
7 Using the Network Scanner Features 7-4 bizhub PRO 1050/1050e Scanner Using the Network Sca nner Features Chapter 7 7.2 Transmission to an E-Mail Address When you send the scann ed data as an attached file of an E-Ma il, necessary procedures depend on whether the a ddresses are registered in advance or they are input ma nually.
Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-5 Using the Network Sca nner Features Chapter 7 3 If you want to put a Title on an E- Mail, press the [Title] key. – Not putting any Title will no t cause any problem. An E-Mail without a Title wi ll be sent with the scanned data being at- tached.
7 Using the Network Scanner Features 7-6 bizhub PRO 1050/1050e Scanner Using the Network Sca nner Features Chapter 7 6 Press [1] - [5] or the [Manual Inp ut] key to determine the Sentence and press the [OK] key. – Pressing the [Manual Input] key displays the character in- put screen.
Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-7 Using the Network Sca nner Features Chapter 7 9 Configure the nece ssary items. – For more info rmation on the configurations on the Scann er Setting Basic screen, refer to "About the Scanner Setting Basic Screen" on Pa ge 7-26.
7 Using the Network Scanner Features 7-8 bizhub PRO 1050/1050e Scanner Using the Network Sca nner Features Chapter 7 When an E-Mail Address is Input Manually 1 Follow the Step 1 to 6 of "When an E-Mail Address is Already Regis- tered" on Page 7-4.
Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-9 Using the Network Sca nner Features Chapter 7 7.3 Storage on the HDD-B When you store the scanned data on the HDD-B, necessary procedures de- pend on whether or not the boxes are registered in advance.
7 Using the Network Scanner Features 7-10 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 3 Press the Name of the Box No.. – You can refine the registered destination by the search fun c- tion. For more information on how to search, refer to "How to Search" on Page 3-7.
Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-11 Using the Network Sca nner Features Chapter 7 7 To send another scanned data, press the [Yes] key. To finish the scanning, press the [No] key. – Pressing the [Yes] key brings you back to the Scanner Set- ting Basic screen.
7 Using the Network Scanner Features 7-12 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 When a Box is Not Registered 1 Follow the Step 1 to 2 of "When a Box is Already Registered" on Page 7-9. 2 Press the [Manual Address] key.
Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-13 Using the Network Sca nner Features Chapter 7 5 Press the [Scanner Settin g] key. The Scanner Setting Basic screen appears. 6 Follow the Step 5 an d after of "When a Box is Already Re gistered" on Page 7-9.
7 Using the Network Scanner Features 7-14 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 7.4 Transmissio n to the FTP server When you send the scanned data to an FTP se rver, ne cessary procedures depend on whether the FTP se rver is regis tered in ad vance or it is input man- ually.
Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-15 Using the Network Sca nner Features Chapter 7 3 If you need to change the Port No., press the [Port No.] key. If unnec- essary, go to the step 5. 4 Input a Port No. and press the [OK] key .
7 Using the Network Scanner Features 7-16 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 – To deselect the Name, press the selecte d Name again. – If you input a destination manually, refer to "When an FTP server is Input Manually" on Page 7-17.
Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-17 Using the Network Sca nner Features Chapter 7 When an FTP server is Input Manually 1 Follow the Step 1 to 5 of "When an FTP server is Already Registered" on Page 7-14. 2 Press the [Manual Address] key.
7 Using the Network Scanner Features 7-18 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 5 Press the [Login Name] key to in- put a Login Name .
Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-19 Using the Network Sca nner Features Chapter 7 7.5 Transmissi on to the SMB server When you send the scanned data to an SMB server, necessary procedures depend on whether the SMB server is registered in advan ce or it is input manually.
7 Using the Network Scanner Features 7-20 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 3 Press the Name of the destination SMB server. – You can refine the registered destination by the search fun c- tion. For more information on how to search, refer to "How to Search" on Page 3-7.
Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-21 Using the Network Sca nner Features Chapter 7 7 To send another scanned data, press the [Yes] key. To finish the scanning, press the [No] key. – Pressing the [Yes] key brings you back to the Scanner Set- ting Basic screen.
7 Using the Network Scanner Features 7-22 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 When an SMB server is Input Manually 1 Follow the Step 1 to 2 of "Whe n an SMB server is Already Registere d" on Page 7-19.
Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-23 Using the Network Sca nner Features Chapter 7 5 Press the [Login Name] key to in- put a Login Name .
7 Using the Network Scanner Features 7-24 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 7.6 Transmission to a Group To send the scanned data to a registered Group, follow the steps below. ! Detail For more information on how to register a Group, refer to "Registering a Group" on Page 6-15.
Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-25 Using the Network Sca nner Features Chapter 7 4 Press the [Scanner Screen] key.
7 Using the Network Scanner Features 7-26 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 7.7 About the Scanner Setting Basic Screen Pressing the [Scanner Scre en] key on the Select De stinations/Storage Loca- tions screen displays the Scanner Sett ing Basic screen.
Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-27 Using the Network Sca nner Features Chapter 7 Original Sett ing Pressing the [Original Setting] key ena- bles you to confi gure the following set- tings.
7 Using the Network Scanner Features 7-28 bizhub PRO 1050/1050e Scann er Using the Network Sca nner Features Chapter 7 ×1.0 Application Pressing the [Application] key enables you to configure the following settings. File Edit Image Edit All Off Book Copy Pressing the [Book Copy] key enables you to con- figure the following settings.
Using the Network Scanner Features 7 bizhub PRO 1050/1050e Scanner 7-29 Using the Network Sca nner Features Chapter 7 Scan Size Size Setting Pressing the [Size Setting] key enables you to configure the following settings.
.
8 About the Networ k Scanner Driver Chapter 8 About the Network Scanner Driver.
8 About the Network Scanner Driver 8-2 bizhub PRO 1050/1050e Scanner About the Networ k Scanner Driver Chapter 8 8 About the Network Scanner Driver 8.1 Reading in from HDD-B To read scanned data sitting on the HDD-B to a computer, you need eith er of the following.
About the Network Scanner Driver 8 bizhub PRO 1050/1050e Scanner 8-3 About the Networ k Scanner Driver Chapter 8 8.1.1 Network Scanner Driver When the KONICA MINOLTA Scanner Driv er is installed, you can download scanned data from the HDD-B of the print controller to a computer using TWAIN-compliant applications.
8 About the Network Scanner Driver 8-4 bizhub PRO 1050/1050e Scanner About the Networ k Scanner Driver Chapter 8 8.2 To install the Ne twork Scanner Driver To install the scanner driver, pe rform the following procedure. 1 Turn on the computer and start Windows.
About the Network Scanner Driver 8 bizhub PRO 1050/1050e Scanner 8-5 About the Networ k Scanner Driver Chapter 8 8.3 Import Scanned Data to Computers 8.
8 About the Network Scanner Driver 8-6 bizhub PRO 1050/1050e Scanner About the Networ k Scanner Driver Chapter 8 4 In the [Scanne r Box No. Set-up] win- dow, input a [Scanner Server name (IP address)] to which you connect, a [Scanner Name] for identification by the driver, a [Box No.
About the Network Scanner Driver 8 bizhub PRO 1050/1050e Scanner 8-7 About the Networ k Scanner Driver Chapter 8 7 You can open the read-in document withi n the application for editing/ saving. Deleting images stored on the HDD-B Perform the following step s to delete a scanned da ta file from the HDD-B.
8 About the Network Scanner Driver 8-8 bizhub PRO 1050/1050e Scanner About the Networ k Scanner Driver Chapter 8 8.4 Features and Sett ings of the Netw ork Scanner Driver [KONICA MINOLTA Scanner Driver] window Information displayed on the [KON ICA MINOLTA Scanner Driver] win- dow are the following.
About the Network Scanner Driver 8 bizhub PRO 1050/1050e Scanner 8-9 About the Networ k Scanner Driver Chapter 8 [Resolution] Shows horizontal resolution (dpi) of the fi r st page of each scanned data file. The [KONICA MINOLTA Scanner Driver ] window contains the following features.
8 About the Network Scanner Driver 8-10 bizhub PRO 1050/1050e Scann er About the Networ k Scanner Driver Chapter 8 [Scanner Selection] Click this button when establishing a co nnection to another scanner, regis- tering new scanner settin gs , or performing editing, copying and deleting.
About the Network Scanner Driver 8 bizhub PRO 1050/1050e Scanner 8-11 About the Networ k Scanner Driver Chapter 8 [Close] This button is used to close the scanner driver. [Help ] This button is used to access Help. Sorting Feature You can sort what is displayed b y clic king [Document], [Dat e & Time], [Page], [Size] and [Resolution].
.
9 About the Secure Fold er Chapter 9 About the Secure Folder.
9 About the Secure Folder 9-2 bizhub PRO 1050/1050e Scanner About the Secure Fold er Chapter 9 9 About the Secure Folder 9.1 Overview of the Secure Folder You can perform secure printing of th e printing featur es using the secure folder.
About the Secure Folder 9 bizhub PRO 1050/1050e Scanner 9-3 About the Secure Fold er Chapter 9 9.2 Creating a Bo x (Secure Folder) After being transmitted from the print co ntroller , a print job configured as se- cure output is stored in a secure box.
9 About the Secure Folder 9-4 bizhub PRO 1050/1050e Scanner About the Secure Fold er Chapter 9 4 Press the [Box Name Input] to dis- play the character inpu t screen. Enter any Box Name. – If you do not register a Box Name, a Box No. becomes the Box Name.
About the Secure Folder 9 bizhub PRO 1050/1050e Scanner 9-5 About the Secure Fold er Chapter 9 7 Make sure that the Box Name you registered on the box list is dis- played. – If you want to create multiple boxes, return to the step 3 and repeat the procedures.
9 About the Secure Folder 9-6 bizhub PRO 1050/1050e Scanner About the Secure Fold er Chapter 9 9.3 Deleting a Bo x (Secure Folder) Delete a box in the secure folder in th e same steps as you delete a box in the personal folder or public folder.
About the Secure Folder 9 bizhub PRO 1050/1050e Scanner 9-7 About the Secure Fold er Chapter 9 9.4 Output from the Secure Folder Perform output from the secure folder in the same steps as you output from the personal folder or public folder.
.
10 Troubles hooting Chapter 10 Troubleshooting.
10 Troubleshooting 10-2 bizhub PRO 1050/1050e Scann er Troubles hooting Chapter 10 10 Troubleshooting 10.1 Cannot connec t to the scanner If an error message appears when atte mpting to access th e scanner, perform the following checks: 0 Consult your network administrator about your network settings.
Troubleshooting 10 bizhub PRO 1050/1050e Scanner 10-3 Troubles hooting Chapter 10 ! Detail In [Controller NIC Setting] of [Network Setting], if you set [Server] of [FTP] to [Not Use], a n access cannot be ma de by the TWAIN driver. For more informatio n, contact your administrator .
10 Troubleshooting 10-4 bizhub PRO 1050/1050e Scann er Troubles hooting Chapter 10 10.2 When an Error Message Appears The following describes the cause and th e solution for an error message that appears during scanning. 10.2.1 Errors during scanning with the [STORE] tab During storing data with the [STORE] tab, the following errors may occur.
Troubleshooting 10 bizhub PRO 1050/1050e Scanner 10-5 Troubles hooting Chapter 10 10.2.2 Errors during scanning with the [SCAN] tab During scanning with the [SCAN] ta b, the following errors may occur.
10 Troubleshooting 10-6 bizhub PRO 1050/1050e Scann er Troubles hooting Chapter 10 Solutions To increase free space on the print controller's internal HDD, t ry either of the followings. - Delete scanned data stor ed on the print controlle r's internal HDD using the KONICA MINOLTA Scanner Driver.
11 Utility Tools Chapter 11 Utility Tools.
11 Utility Tools 11-2 bizhub PRO 1050/1050e Scann er Utility Tools Chapter 11 11 Utility Tools 11.1 PageScope JobEditor Using PageScope JobEditor enables you to import the copier's image data (copied data) from a computer on the network to edit/process them.
Utility Tools 11 bizhub PRO 1050/1050e Scanner 11-3 Utility Tools Chapter 11 11.1.1 How to use PageScope JobEditor To use PageScope JobEditor, you need to configure the connec tion be- tween your computer and the copier. Basic window [Shift X] You can shift the h orizontal printing position by the 0.
11 Utility Tools 11-4 bizhub PRO 1050/1050e Scann er Utility Tools Chapter 11 [File] - [connect] - [JOB Restore] This makes the cop ier to output the computer-s tored copied data. [File] - [connect] - [JOB Edit ] Edit the copied data stored in the copier.
Utility Tools 11 bizhub PRO 1050/1050e Scanner 11-5 Utility Tools Chapter 11 Printing Setting win dow [Print ] Specify the num ber of copies to output. [After transfer copier work] - [print immediately] The copier outputs image data immediately after reception.
11 Utility Tools 11-6 bizhub PRO 1050/1050e Scann er Utility Tools Chapter 11 Settings window [Copies IP Address] Configure the copier's IP Address. [Setting temporary folder] Specify the storage location for the image data imported from the copier.
Utility Tools 11 bizhub PRO 1050/1050e Scanner 11-7 Utility Tools Chapter 11 How to use Help You can refer to the html Help that describes how to operate PageScope JobEditor. For more informati on, please refer to Help. Refer to Help in the following steps.
11 Utility Tools 11-8 bizhub PRO 1050/1050e Scann er Utility Tools Chapter 11 11.2 PageScope JobEditorServer To store image data sent from the copier on your computer automatically, in- stall PageScope JobEditorServer on your computer. ! Detail The JOB control fi le named HEAD and image dat a files are sent to a com- puter.
Utility Tools 11 bizhub PRO 1050/1050e Scanner 11-9 Utility Tools Chapter 11 11.2.1 How to use PageScope JobEditorServer When PageScope JobE ditorServer receives image data from the copier, cre- ate a directory according to the prior configuration to automatically store da- ta.
11 Utility Tools 11-10 bizhub PRO 1050/1050e Scanner Utility Tools Chapter 11 ! Detail By default, C:My DocumentJEjobs is specified. To change this, click the [Change] button and specify a folder. [Save job name] You can choose how to name a Folder Na me for automatically received im- age data.
Utility Tools 11 bizhub PRO 1050/1050e Scanner 11 -11 Utility Tools Chapter 11 How to use Help You can refer to the html Help that describes how to operate PageScope JobEditorServer. For more information, please refer to Help. Refer to Help in the following steps.
.
12 Appendix Chapter 12 Appendix.
12 Appendix 12-2 bizhub PRO 1050/1050e Scann er Appendix Chapter 12 12 Appendix 12.1 Glossa ry Item Description 10BASE-T/100BASE-TX/ 1000BASE-TX Types of specifications in compliance with the Ether- net standard. Cables made of two stranded co pper wire rods are used.
Appendix 12 bizhub PRO 1050/1050e Scanner 12-3 Appendix Chapter 12 Gateway Hardware or software serving as a point conne cting networks. Not only connecting, it conve rts the for- mat, address, protocol, etc . of the data according to the network to be co nnected.
12 Appendix 12-4 bizhub PRO 1050/1050e Scann er Appendix Chapter 12 PostScript Representative page description languag e generally used for printing requiring specifically high quality, developed by US Adobe. ppm Abbreviation of Pages Per Minute. Unit to indicate the number of sheets whic h can be printed in one minute.
Appendix 12 bizhub PRO 1050/1050e Scanner 12-5 Appendix Chapter 12 12.2 Index B Box No. ........... .................... ..... 5-6 Boxes ........... ................. ........... 4-4 C Control Panel ................ ........... 3-2 Copied Data .......
MEMO.
MEMO.
MEMO.
56UE97932E 2006 2006.10 3 www .konicaminolta.com.
An important point after buying a device Konica Minolta 1050E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Konica Minolta 1050E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Konica Minolta 1050E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Konica Minolta 1050E you will learn all the available features of the product, as well as information on its operation. The information that you get Konica Minolta 1050E will certainly help you make a decision on the purchase.
If you already are a holder of Konica Minolta 1050E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Konica Minolta 1050E.
However, one of the most important roles played by the user manual is to help in solving problems with Konica Minolta 1050E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Konica Minolta 1050E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
