Instruction/ maintenance manual of the product 50 Konftel
Go to page of 14
User guide Conference unit Konftel 5 0 Deutsch I English I Español I Français I Italiano I Svenska Intelligent communications Available in the UK from Westlake Communications Tel : 0800 298 8011 Fax : 0870 443 9045 www.
ENGLISH Following parts included: Konftel 50 Art nr 910101040 Switchbox incl cable 0.5 m Art nr 900101042 T ransformer Art nr 900102056 (Universal) or 90102026 (Europe) 826102026 (GB) 900102048 (AUS) Connection cable power , 6 m Art nr 900103355 Connection cable tele , 3 m Art nr 900103316 Connection cable PC , 1,5 m Art nr 900103318 www.
ENGLISH Contents Connection to telephone .................. 2 V olume setting telephone ......... 3 Call .............................................. 4 Mute ............................................. 5 T rimming ..................................
ENGLISH 2 Connection to telephone IMPORT ANT The microphone volume is to be adjusted when installing. See next page. 1 2 3 Only mains transformer of FRIWO type 7237, ML120P070F , ML120P070G or Pantene PI-48-235AU may be connected. Microphone LEDs Loudspeakers On/off button - button Mute button + button T rim button 6 m 3 m www.
ENGLISH 3 V olume setting telephone Lift the handset, make a call and put it to one side. Switch to loudspeaker by turning on your Konftel 50. V olume setting for loudspeakers Set the volume in the loudspeakers with the help of the - and + buttons. Note that the system telephone volume control affects the volume in the Konftel 50 loudspeakers.
ENGLISH 4 Call with Konftel 50 Dialling Lift the handset, make a call and put it to one side. Switch to loudspeaker by turning on your Konftel 50. Finish the call by putting down the handset and turning off Konftel 50. Answer call Answer in your normal telephone when it rings, and switch to loudspeaker mode by turning on your Konftel 50.
ENGLISH 5 Mute function Switch off the microphone, the LEDs change from green to red. The receiving party can now not hear what you are saying. Switch on the microphone by pressing the button again. Automatic trimming Konftel 50 is automatically trimmed to eliminate echoes when it is turned on.
ENGLISH M IC - IN L IN E - O U T PC/Soundcard 6 Connection to PC Connection to PC Konftel 50 is connected to a sound card on a PC or Macintosh as shown in the figure. Note: T o obtain full duplex speech, you must have an appropriate sound card. Connect in the following order: 1.
ENGLISH 7 V olume setting PC V olume setting loudspeakers Konftel 50 has a default setting that is advis- able to follow when setting the volume in the Microsoft V olume Control in the PC. Select V olume control from the Start menu: Start>Programs>Accessories> Multimedia>V olume control.
ENGLISH 8 Call via PC A description of how calls are made via a PC follows below . Note that there may be variations between different software and computers. Dialling with PC Tu rn on Konftel 50 for loudspeaker function. Call with the PC. The call is completed by interrupting the dialling with the PC and turning off Konftel 50.
ENGLISH 9 Tr oubleshooting Some of the problems that may arise when using Konftel 50 are described below . Calls are audible through the telephone headset but not through Konftel 50 1. Is Konftel 50 properly connected? See the page on connecting telephone.
ENGLISH 10 Tr oubleshooting, maintenance, accessories Poor sound quality , echo 1. Check the position. The unit is designed to stand flat on the table. A void moving it around during call. Neither should it be placed too close to a wall or under objects such as lamp shades or leaves from potted plants.
ENGLISH 11 Te chnical Data Central unit Power supply: T ransformer 12 V DC/230 V AC, 700 mA Input: Analogue line in/out, modular 6/6. Rec (loudspeakers) -10 dBV (adjustable). Send (microphone) -30 dBV (adjustable). Loudspeaker volume: Adjustable in 15 stages.
Developed by Konftel T echnology AB Box 268, SE-901 06 Umeå, Sweden Phone: +46 90 706 489 Fax: +46 90 131 435 Konftel T echnology was one of the first companies in the world to develop advanced conference phones with Full Duplex-technology .
An important point after buying a device Konftel 50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Konftel 50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Konftel 50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Konftel 50 you will learn all the available features of the product, as well as information on its operation. The information that you get Konftel 50 will certainly help you make a decision on the purchase.
If you already are a holder of Konftel 50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Konftel 50.
However, one of the most important roles played by the user manual is to help in solving problems with Konftel 50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Konftel 50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
