Instruction/ maintenance manual of the product 100/D Konftel
Go to page of 18
User guide Conference unit Konftel 1 00/D English Intelligent communications Westlake Communications 0800 015 0286.
ENGLISH CONTENTS Definitions ________________________________ 1 Positioning ________________________________ 2 Connection to telephone ____________________ 3 Switchbox ____________________________ 4 S.
ENGLISH 1 Upper side Underside Switch box Speaker Red LEDs Microphone Key set Green On/Off- indicator Holes for wall attachment Power input T ape recorder output Line IN/OUT Not in use FEA TURES Input.
ENGLISH 2 The Konftel 100/D conference unit is designed to function in rooms of up to 25 m 2 with normal acoustics . Konftel can offer other systems for larger premises. The unit’ s omnidirectional microphone has a fantastic ability to pick up sound.
ENGLISH 3 Connection to telephone Konftel 100/D is connected to the handset connection on a digital system telephone as shown in the diagram. Perform connection in the following order: 1. Remove the system telephone connector from the telephone wall jack.
ENGLISH 4 The Konftel 100/D is delivered with a switch box that makes possible auto- matic switching between calls via the telephone handset and Konftel 100/D.
ENGLISH 5 V olume settings Different makes of system telephones function in different ways. That is why the volume on the Konftel 100/D must always be accurately adjusted the first time it is connected. This will ensure the best function in conjunction with the system telephone being used.
ENGLISH 6 Connection to a PC Konftel 100/D is connected to a sound card on a PC as shown in the figure above. NOTE: T o achieve full duplex speech communication, the PC sound card must support full duplex. Perform the connection as follows: 1. T urn off the power to the PC.
ENGLISH 7 V olume settings Konftel 100/D has a default volume setting that may be used when setting volume level in the Microsoft® V olume Control. Choose V olume Control from the Start menu: Start>Program>Accessories> Multimedia>Volume control.
ENGLISH 8 KEY SET Key functions 1 On/Off-key T urns the Konftel 100/D on and off. 2 Mute key T urns the microphone on and off. 3 + and – keys Repeatedly pressing these keys increases / decreases sound level in the loudspeakers. After a completed call, Konftel 100/D retains the latest volume settings until they are changed again.
ENGLISH 9 Automatic tuning When the Konftel 100/D is turned on, it auto- matically adjusts sound levels to the room and the telephone line. Konftel 100/D registers the room’ s acoustics and makes adjustments continually during the call. Manual tuning T o eliminate possible echo during a call, Konftel 100/D can be tuned manually .
ENGLISH 10 MUTE, T APE RECORDER Mute function T urns off the microphone and the red LEDs extinguish. Press again to turn on the microphone. T ape recorder output On the underside of the Konftel 100/D is an output for a tape recorder . The output accepts a 3.
ENGLISH 11 Calling with telephone Lift the handset on the telephone and dial the number . Press On/Off on the Konftel 100/D for loudspeaker function. Leave the handset off the telephone. The call is terminated by placing the handset back on the telephone and pressing the On/Off key on the Konftel 100/D.
ENGLISH 12 CALLING WITH PC There are many video and speech communication products for PC, Microsoft Netmeeting, Intel Proshare and Internet Phone from V ocalT ec to name just a few . All of these products have different ways of working. The following instructions are therefore a simplified version of how to use Konftel 100/D with PC products.
ENGLISH 13 T elephone troubleshooting 1 Check that the microphone is switched on. The red LEDs should be lit (see page 1). 2 T une the Konftel 100/D manually (see page 9). 3 Reduce the microphone volume if the party called complains about too much echo (see page 5).
ENGLISH 14 Main unit Power supply: 230 V AC/13 V DC, 1.2 A transformer (T ufvasson T ype PFLF15 or Dantrafo DT 14313. Inputs: Analogue line in/out, modular 6/6. Rec (speaker) -10 dBm (adjustable). Send (microphone) -30 dBm (adjustable) . Outputs: Connection for tape recorder , tele 3.
ENGLISH SOM 15 Switch box Input for handset: Modular 4/4. Input 100/D: Cable, modular 6/6. Output, telephone: Cable, modular 4/4. The contact for connecting the switch box to the system telephone may only be connected to SEL V voltage according to SS-EN 60 950.
Developed by Konftel T echnology AB – a Konftel Group company Box 268, SE-901 06 Umeå, Sweden Phone: +46 90 706 489 Fax: +46 90 131 435 E-mail: konfteltech@konftel.com W eb: www .konfteltech.com Konftel T echnology was one of the first companies in the world to develop advanced conference phones with Full Duplex-technology .
An important point after buying a device Konftel 100/D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Konftel 100/D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Konftel 100/D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Konftel 100/D you will learn all the available features of the product, as well as information on its operation. The information that you get Konftel 100/D will certainly help you make a decision on the purchase.
If you already are a holder of Konftel 100/D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Konftel 100/D.
However, one of the most important roles played by the user manual is to help in solving problems with Konftel 100/D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Konftel 100/D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
