Instruction/ maintenance manual of the product 100 Konftel
Go to page of 11
User guide Conference phone K o n f t e l 1 0 0 Dansk I Deutsch I English I Español I Français Italiano I Norsk | Suomi I Svenska Conference phones for every situation.
Contents Description Connection, accessories, spare parts Calling Incoming calls Outgoing calls Redial Multi-party calls Programming the R key Conference key V olume control, mute, tuning, ring signal.
T elephone line input (POTS) T op Bottom Loudspeakers Green/red mic indicators Microphone Keypad Power supply Description Konftel 100 • User Guide 4 OK key Conference key R key Up/Down key Mute/Paus.
2 PIN (-) 3 PIN (-) 4 PIN (+) 5 PIN (+) Description 5 Konftel 100 • User Guide Connectors underneath Konftel 100 Connection 240 V mains outlet Mains trans- former Power supply and analogue POTS network cable, 7.
0–9... A ring signal is heard and the green mic indicators light to indicate the incoming call. Press the OK key to answer . T o end the call, press OK. Incoming calls Outgoing calls Press OK. Dial the number . T o end the call, press OK. Calling 6 Konftel 100 • User Guide Redial Press the Redial key .
Calling Konftel 100 • User Guide 7 The requirements for the operation of the R key vary between PBXs and from country to country . Konftel 100 therefore lets you program the R-pulse time so that it works with most PBXs on the market. Hold down the R key for three seconds until the green LEDs flash and you hear three short beeps.
Conference key Konftel 100 • User Guide 8 Programming the Conference key Keep the Conference key depressed 3 sec until the red LEDs flash and you hear a repeating tone. Enter your phone conference number with the keypad (max 20 digits). If Konftel 100 must wait for a second dial tone, you should insert a pause with the Mute/ Pause key .
V olume control, mute, tuning, ring signal volume Konftel 100 • User Guide 9 V olume control Adjust the speaker volume with the Up/Down key during the call. Mute function Press the Mute key to switch off the micro- phone. The mic indicators change to red.
Konftel 100 • User Guide 10 T roubleshooting and maintenance T roubleshooting 1. Check that the microphone is on during the call. The green microphone indicators must be lit. 2. Check that the Konftel 100 is connected to an analogue telephone jack. 3.
11 T echnical data Konftel 100 Mains transformer (Europe): DC transformer 240 V AC/12 V DC; 700 mA. Mains transformer (UK): DC transformer 100 - 240 V AC/12 V DC; 700 mA. Network interface: Analogue PBX or PSTN, RJ-11. Power supply and network cable: 7.
Developed by Konftel AB Box 268, SE-901 06 Umeå, Sweden Phone: +46 90 706 489 Fax: +46 90 131 435 E-mail: info@konftel.com W eb: www .konftel.com Konftel is a leading company within speaker communication and audio technology .
An important point after buying a device Konftel 100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Konftel 100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Konftel 100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Konftel 100 you will learn all the available features of the product, as well as information on its operation. The information that you get Konftel 100 will certainly help you make a decision on the purchase.
If you already are a holder of Konftel 100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Konftel 100.
However, one of the most important roles played by the user manual is to help in solving problems with Konftel 100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Konftel 100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
