Instruction/ maintenance manual of the product K-3402-EB Kohler
Go to page of 12
106423-0290 SIPHON VORTEX L OW PROFILE ONE-PIECE TOILETS INTRODUCTION This service instruction will help you understand the opera tion and repair of Kohler low profile onepiece toilets.
- 2 - K-3385-EB Rochelle I.P .S. SUPPL Y OF OUTLET Fig. #6 Fig. #4 K-3378-EB Pillow T alk OF OUTLET I.P .S. SUPPL Y Fig. #7 K-3397-EB San Raphael I.P .S. SUPPL Y K-3383-EB Palarre Fig. #5 OF OUTLET I.P .S. SUPPL Y Fig. #8 K-3402-PB Rialto OF OUTLET I.
- 3 - ROUGHINGIN AND INST ALLA TION CONSIDERA TIONS Kohler low profile, onepiece toilets are perfect for remodel ing and new installations. Refer to the roughingin draw ings Figs. #4 - #9. Always refer to your local codes and the installation in structions packed with the toilet.
- 4 - HOW TO REP AIR THE RIAL TO , SAN RAPHAEL , CABERNET , AND PILL OW T ALK FL OA T AND FLUSH VAL VE. INTRODUCTION The following instructions are used to replace the plunger assembly on the flush valve for the San Raphael, Rialto, Cabernet, and Pillow T alk toilets.
- 5 - Old Style Flush Valve Fig. #13 T rip Chain Flush Ball Flapper Hooks Mounting Hooks Screws controls flow at various water pressures. An antisiphon valve prevents backflow . F or most satisfactory operation of this toilet, 25 to 80 psi working pressure is required at the fixture.
- 6 - VOL UME CONTROL . If necessary , you can adjust the flow of water with adjusting screw . Decrease the flow by turning the screw downward or increase the flow by turn ing the screw upward. The screw must be locked after adjustment with the locknut.
- 7 - 4. Place seat on toilet, centering the seat/cover bolts in bolt holes as shown in Fig. #17. French Curve Seat Installation Fig. #17 Bolt Washer Nut 5. Align the nut on the seat/cover bolt. 6. After nut has been started on bolt, hold the nut in place and drive the bolt from the top with a screwdriver until tight.
- 8 - SERVICING THE P ALARRE TOILET SEAT 1. Insert the seat hinge bolts through the holes in the toilet bowl ledge and secure with two wing nuts as shown in Fig. #20. Assembling the Palarre Seat Fig. #20 Seat Hinge Bolts T oilet T oilet Seat Wing Nuts 2.
- 9 - LUSTRA SEA T REMOVAL 1. Refer to Fig. #24. Pry up seat hinge post covers and loosen screws. Remove wing nuts. Lustra Seat Removal Fig. #24 Seat Hinge Post Covers Screw Wing Nut 2. Remove seat from toilet. PILL OW T ALK SEA T REPLACEMENT 1. Refer to Fig.
- 10 - the float valve may not be shutting off. Refer to the ap propriate chart on the following pages. 4. If the water level has dropped below the water line, check for leaks. Sources of leaks may be at the flapper , the base of the flush valve, or within the china water closet.
- 11 - T oilet does not shut off and water is flowing into the flush valve overflow . SYMPTOMS PROBABLE CA USE CORRECTIVE ACTION P oor flush. A . Low tank water level. A . Check water level in tank, ad just per startup instructions. B. Supply stop not fully open.
- 12 - SYMPTOMS PROBABLE CA USE CORRECTIVE ACTION TROUBLESHOOTING GUIDE FOR ROCHELLE AND P ALARRE P oor flush. A . W ater pressure is below 25 psi. A . Increase running water pres sure. B. Water level in tank is too low . B. Bend float rod up slightly .
An important point after buying a device Kohler K-3402-EB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kohler K-3402-EB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kohler K-3402-EB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kohler K-3402-EB you will learn all the available features of the product, as well as information on its operation. The information that you get Kohler K-3402-EB will certainly help you make a decision on the purchase.
If you already are a holder of Kohler K-3402-EB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kohler K-3402-EB.
However, one of the most important roles played by the user manual is to help in solving problems with Kohler K-3402-EB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kohler K-3402-EB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
