Instruction/ maintenance manual of the product K-3394 Kohler
Go to page of 8
1 13362-2- EA (9532) Copyright 1995 Kohler Co. SAN RAPHAEL PRESSURE LITE VITREOUS CHINA SIPHON JET TOILET BEFORE YOU BEGIN HOW TO USE THESE INSTRUCTIONS Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences.
2 1 13362-2- EA (9532) Kohler Co., Kohler , WI MA TERIALS REQUIRED Supply stop (3/8” recommended) Closet flange T oilet gasket (wax seal) T oilet T -bolts 1/2” or 5/16” diameter .
3 Kohler Co., Kohler , WI 1 13362-2- EA (9532) ROUGH-IN PLUMBING T urn off the main water supply . Install or relocate the supplies and outlets as necessary to conform to roughing-in dimensions. See Fig. #3 . For supply stop location, See Fig. #4 . CAUTION: Risk of trap seal loss in back-to-back installations.
4 1 13362-2- EA (9532) Kohler Co., Kohler , WI Install new 1/4” or 5/16” diameter T -bolts. Fig. #5 T -Bolts Closet Flange INST ALLA TION INST ALL TOILET GASKET Carefully set the new toilet upside down on padding. Firmly install the gasket onto the toilet outlet.
5 Kohler Co., Kohler , WI 1 13362-2- EA (9532) CONNECT SUPPLIES Carefully bend the supply stop tubing to fit. Measure for required penetration into the supply stop. Cut and de-burr the tubing. Position the connection hardware onto the tubing, as shown.
6 1 13362-2- EA (9532) Kohler Co., Kohler , WI ST ART -UP T urn on the water supply to bring the Pressure Lite system to operating pressure (approximately 1 minute). Check for leaks. Slight retightening of leaking connec- tions should stop any seal leaks.
7 Kohler Co., Kohler , WI 1 13362-2- EA (9532) TROUBLESHOOTING CHART The troubleshooting guide below is mean to for general aid only . All fittings in this toilet except for the piston nut are preset by the manufacturer to prevent adjustment. Any attempt to adjust the fittings (except the piston nut and winterizing) may damage the toilet.
8 1 13362-2- EA (9532) Kohler Co., Kohler , WI IMPORT ANT CONSUMER INFORMA TION CONSUMER RESPONSIBILITIES CAUTION: Risk of product damage. Do not use any oil or lubricants on the Pressure Lite system. This may result in damage to the system. NOTE: Cleaning of the Pressure Lite system is not necessary .
An important point after buying a device Kohler K-3394 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kohler K-3394 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kohler K-3394 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kohler K-3394 you will learn all the available features of the product, as well as information on its operation. The information that you get Kohler K-3394 will certainly help you make a decision on the purchase.
If you already are a holder of Kohler K-3394, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kohler K-3394.
However, one of the most important roles played by the user manual is to help in solving problems with Kohler K-3394. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kohler K-3394 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
