Instruction/ maintenance manual of the product i2340Ve AOC
Go to page of 63
www .aoc.com c 201 0 AOC.All Rights Reserved..
2 Safety ........................................................................................................................................................................ 4 National Conventions ..................................................
3 EPEA T Declarati on .......................................................................................................................................... 5 9 Service ..............................................................................
4 Safe ty National Con ventions The following subsections describe notational conventions used in this document. Notes, Cautions, and W a rnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in it alic type.
5 Power The monitor should be operated only from the type of power source indicated on the label. I f you are not sure of the type of power supplied to your home, consult your dealer or local power company . The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin.
6 Inst allation Do not place the monitor o n an unstab le cart, stand, tripod, br a cket, or table. If the monitor falls, it can inj ure a person and c ause seriou s damage t o this product. U se only a cart , stand, tripod, bracket, or t abl e recommended by the manufacturer or sold with this product.
7 Cleaning Clean the cabinet regularly with the cloth provided. Y ou can use sof t -detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. W hen cleaning, make su re no detergen t is leaked into t he product.
8 Other If the product is emitting a strange smell, sound or smoke, disconnect the pow e r plug IMMEDIA TEL Y and contact a Service Center . Make sure that the ventilating openings are not blocked by a t a ble or curtain. Do not engage the LCD monitor in severe vibration or high imp act conditions during operation.
9 Setup Content s in Box Not all signal cables (Analog, Audio, DVI, and HDMI cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office fo r confirmation.
10 Setup St and & Base Please setup or remove the base following the steps as below . Setup: Remove:.
11 Adjusting Vie w ing Angle For optimal viewing it is recommended to look at the f u ll face of the monitor , then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor w hen you c hange the monitor's angle.
12 Connecting the Monitor Cable Connections On Back of Monitor and Computer: 1. DVI 2. Analog (DB-15 VGA cable) 3 . Power T o p rotect equipment, always turn off the PC an d LCD monitor before connecting. 1 Connect the power cable to the AC port on the back of the monitor .
13 Adjusting Setting Optimal Resol ution Windows V ista For Windows Vist a: 1 Click ST ART . 2 Click CONTROL P ANEL. 3 Click Appearance and Personalization.
14 5 Click Display Settings. 6 Set the resolution SLIDE-BAR to 1920 by 1080 ..
15 Windows XP For Windows XP: 1 Click ST ART . 2 Click CONTROL P ANEL. 3 Click Appearance and Themes. 4 Double click DISPLA Y . 5 Click SETTINGS..
16 6 Set the resolution SLIDE-BAR to 1920 by 1080 . Windows ME/2000 For Windows ME/2000: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Double click DISPLA Y .
17 Hotkeys 4:3 or wide image ratio hot key : W hen there is no OSD, press > continuously to change 4:3 or wide image ra ti o. (If the pro duc t s creen s ize is 4:3 or input signal resolution is wide format, the h ot key is disable to adjust) e-Sensor hot key .
18 OSD Setting Basic and simple instruction on the control key s. 1) Press the MENU-button to activate the OSD window . 2) Press ◄ or ► to navigate through the functions. Once the desired function is highlighte d, press the MENU-button to activate sub-menu .
19 Luminance Press Menu to display MEN U Press Menu to display MEN U Press (Menu) to display menu. Press ◄ or ► to select (Luminance) , and press to enter . Press ◄ or ► to select submenu, press to enter , and press ◄ or ► to adjust. Press to exit.
20 Brightness 0-100 Backlight Adjustment Contrast 0-100 Contrast from Digital-register. Eco mode Standard Standard Mode Text Text Mode Internet Internet Mode Game Game Mode Movie Movie Mode Sp orts Sp.
21 Image Setup Press (Menu) to display menu. Press ◄ or ► to select (Im age Setup) , and press to enter . Press ◄ or ► to select submenu, press to enter , and press ◄ or ► to adjust.
22 Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise. Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise H.Position 0-100 Adjust the horizontal position of the picture. V.Position 0-100 Adjust the vertical position of th e picture.
23 Color T emperature Press (Menu) to display menu. Press ◄ or ► to select (Color T emperature) , and press to enter . Press ◄ or ► to select submenu, press to enter , and press ◄ or ► to adjust.
24 W arm Recall W arm Co lo r Temperature from EEPROM. Normal Recall Normal Col or Temperature from EEPROM. Cool Recall Cool Color Temperature from EEPROM. sRGB Recall SRGB Color Temperature from EEPROM. User Red Red Gain from Digital-register Green Green Gain Digital-register.
25 Color Boost Press (Menu) to display menu. Press ◄ or ► to select (Color Boost) , and press to enter . Press ◄ or ► to select submenu, press to enter , and press ◄ or ► to adjust.
26 Full Enhance on or off Disable or Enable Full Enhance Mode Nature Skin on or off Disable or Enable Nature Skin Mode Green Field on or off Disable or Enable Green Field Mode Sky-blue on or off Disab.
27 Picture Boost Press (Menu ) to display MENU. Press ◄ or ► to select (Picture Boost); and press to ente r . Press ◄ or ► to select Bright Frame. Select “on” to activate Picture Boost. Press ◄ or ► to select submenu, press to enter , and press ◄ or ► to adjust.
28 Frame Size 14 -100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightness Contrast 0-100 Adjust Frame Contrast H. position 0- 100 Adjust Frame horizontal Position V.
29 OSD Setup Press (Menu) to display menu. Press ◄ or ► to select (OSD Setup) , and press to enter . Press ◄ or ► to select submenu, press to enter , and press ◄ or ► to adjust.
30 OSD Setup H.Position 0-100 Adjust the horizontal position of OSD V.Position 0-100 Adjust the vertical position of OSD Timeout 5- 120 Adjust the OSD Timeout Transparence 0- 100 Adjust the transparen.
31 Extra Press (Menu) to display menu. Press ◄ or ► to select (OSD Setup) , and press to enter . Press ◄ or ► to select submenu, press to enter , and press ◄ or ► to adjust.
32 Input Select Auto Analog Digit al Select to Auto Detect input signal Select Analog Sigal Source as Input Select Digital Sigal Source as Input Auto Config yes or no Auto adjust the picture to defaul.
33 Reset Press ◄ or ► to select YES o r NO. Press (Menu) to display menu. Press ◄ or ► to select (R ese t), and press to enter . Press to exit.
34 Reset yes or no Reset the menu to default.
35 Exit Exit Exit the main OSD Press (Menu) to display menu. Press ◄ or ► to select (Exit); and press to enter ..
36 LED Indicator St atus LED Color Full Power Mode Blue Active-off Mode Orange.
37 Driver Monitor Dri ver Windows 7 1. S tart W indow s ® 7 2. Click on the 'St art' button and then click on 'Control Panel'. 3. Click on the 'Display' icon.
38 4.Ckick on the “ Change display settings ” button. 5. Click the “ Advanced Settings” button. 6. Click the “Monitor” tab and then click the “Properties” button.
39 7. Click the “Driver” tab. 8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver ... “ and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device drivers on my computer" .
40 10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X: Drivermo dule name (w here X is t he drive letter designator for the CD-ROM drive). 11. Select the "xxx.inf" file and click the “Open” button.
41 Windows V ista 1. Click "S tart " and "Control Panel". T h en, double -click on "Appearanc e and Personalization". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings.
42 4. Click "Properties" in the "M onito r" tab. If the "Properties" button is deacti vated, it means th e configuration for your monitor is completed. T h e monitor can be used as is. If the message "Windows needs..
43 Windows XP 1. S tart Windows® XP 2. Click on the 'S tart' button and then click on 'Control Panel'. 3. Select and click on the category „Appearance and T he mes‟ 4.
44 5. Select the 'Settings' tab then click on the 'Advanced' button. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please sto p i nstallation. - If the 'Properties' button is active, click on 'Properties' butto n.
45 8. Select the 'Install from a list or specific location [advanced]' radi o button and then click on the 'Nex t' bu tton. 9. Select the 'Don't Search. I will choose the driver to install' radio button. T hen click on the 'Next' button.
46 Windows 2000 1. S tart Windows® 2000 2. Click on the 'S tart' button, point to 'Settings', and then c l ick on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced.
47 i-Menu Welcome to “i - Menu” sof tware by AOC. i -Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor .
48 e-Sensor Welcome to AOC “ e-Sensor ” ! AOC “e -Sensor ” is an infrared s ensor embedded in your m onitor bezel; it enables your m o nitor to turn of f while you are away .
e-Saver Welcome to use AOC e-Saver monitor po wer management software! The AOC e-Saver features Smart Shutdo wn functions for your monitors, all ows your monitor to timely s hutdown when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below).
50 Screen+ Welcome to "Screen+" software by AOC, Screen+ software is a d esktop screen splitting tool, it splits the desktop into different panes, each pane displays a dif f erent window . Y ou only need to drag the window to a corresponding pane, when you want to access it.
5 1 T roubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make s ure th e pow er button i s ON and th e P ower Cord is pr operly connected to a grounded power outlet and to the monitor . No images on the screen Is the power cord connected properly? Check the power cord connection and power supply .
5 2 Monitor Is Stuck In Active Off-Mode" The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly f i tted in its slot. Make sure the monitor's video cable is properly connected to th e co mputer . Inspect the monitor's video cable and make sure no pin is bent.
5 3 S pecification General Specification Panel Product name i2340Ve Driving system TFT Col or LCD Viewable Image Size 58.42 cm diagon al Pixel pitch 0.2652 mm(H) x 0.2652 mm( V) Video R, G , B Analog lnterface & Digital Interface Separate Sync. H/V TT L Display Color 16.
5 4 Operating 10% to 85% (non-condensing) Non-Operating 5% to 93 % (non-condensing) Altitude: Operating 0~ 3658m (0~ 12000 ft ) Non-Operating 0~ 12192m (0~ 40 000 ft ) Preset Displa y Modes ST AND RESOLUTIO N Horizontal V ertical VGA 640×480@60Hz 31.
5 5 Pin Assignment s Pin Number 15 -Pin Side of the Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 N.C. 5 Detect Cable 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 Ground 11 N.C. 12 DDC -Serial data 13 H-sync 14 V -sync 15 DDC -Serial clock Pin No. Signal Name Pin No.
5 6 Plug and Pla y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabiliti e s according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity a nd, depending on the level of DDC used, c om municate additional information about its display cap abili ties.
5 7 Regulation FCC Notice FCC Class B Radio Frequency I nterference Statement W ARNIN G: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested an d found to co mply w ith the limits for a Class B digital device, pur s uant to Part 15 of the FCC Rules.
5 8 WEEE Declaration Disposal of Was te Equipment by Users in Private Household in the European Union. This symbol on the product or on its p ackaging indicates that this product must not be disposed of with your other household waste.
5 9 EPE A T Decl aration EPEA T is a s ystem to help purchasers in the public and priva te s ectors evaluate, comp a re and select desktop computers, notebooks and monitors based on their environmental a ttribute s.
60 Service W arranty S tatement for Europ e LIMITED T H REE-YEAR WAR RANTY* AOC Color Monitors sold within Europe AOC International (Europe) GmbH warrants this product to be free from def e cts in material and w o rkmanship for a period of Three (3) years af ter the o riginal date of consumer purchase.
6 1 modified or altered; you bear the sole responsibility and liabil ity for a ny such modification or alt eration. ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING T HE WARRANTIES OF ME.
6 2 W arranty St atement for North & South America (excluding Brazil) WARR ANTY ST A TEMENT for AOC Color Monitors Including those Sold within North America as S pecified Envision Peripherals, Inc.
6 3 ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANT A BILITY AND FI TNESS FOR A P ART ICULAR P URPOSE) ARE LIMITED IN DURA T ION TO A PERIOD OF T HREE (3) YEARS FOR P ART S AND L ABOR AND ONE (1) YEAR FOR CR T TUBE OR LCD P ANEL FROM T HE O RIGINAL DA TE OF CONSUMER PURCHASE.
An important point after buying a device AOC i2340Ve (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AOC i2340Ve yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AOC i2340Ve - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AOC i2340Ve you will learn all the available features of the product, as well as information on its operation. The information that you get AOC i2340Ve will certainly help you make a decision on the purchase.
If you already are a holder of AOC i2340Ve, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AOC i2340Ve.
However, one of the most important roles played by the user manual is to help in solving problems with AOC i2340Ve. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AOC i2340Ve along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
