Instruction/ maintenance manual of the product I2267FWH AOC
Go to page of 66
I 2 3 6 7F / I 2267 F W H / I2367F I2267F W / / I2067F LED B acklight L C D Monitor User Manual.
2 Safety ........................................................................................................................................................................ 3 National Conv entions .................................................
3 Safety Nationa l Con ventio ns The following sub sections describe notational conv entions used in this do cument. Notes, Cauti ons, and W arn ings Throughout this guide , blocks of text may be accomp anied by an icon and pr inted in bol d type or in itali c type.
4 Pow er The monitor should be operate d only fr om the ty pe of pow er source indicated on the label. I f you ar e not sure of the t ype of pow er suppli ed to your ho me, consu lt your dea ler or loc al power company . The monitor is equipp ed with a three - pron ged grou nded plug, a p lug with a third (gro unding) pin .
5 Installation Do not pla ce the mo nitor on an unstabl e cart, sta nd, trip od, br acket, or ta ble. If t he monitor falls , it can i njure a person and cause s erious da mage t o this pr oduct. U se only a cart, stand, tripod, bracket, or table recomme nded by the manufact urer or sold with t his product.
6 Cleaning Clean the cabinet regu larly w ith clo th . Y ou can use soft - detergent to wipe o ut the st ain, instea d of str ong - detergen t which w ill cauteriz e the pr oduct cabi net. When c leaning, ma ke sure no det ergen t is lea ked int o the product.
7 Other If the prod uct is emi tting a stra nge smell, sound or smoke, di sconnect th e power pl ug IMMED IA TEL Y and contact a S ervice Cent er . Make sure th at the v entilating openings are not blo cked by a table or curta in. Do not enga ge the LCD monitor in severe v ibration or high i mpact condit ions duri ng operation.
8 S etup Conten ts in Box ch eck with t he lo cal dealer or AOC branch of fice for confirm ation. Monitor CD Manual Base Adapter Power Cable * Audio Cable Not all si gnal cable s (Analog, and HDM I cables) w ill be prov ided for a ll countrie s and region s.
9 Setup Stand & Base Please setup or remov e the base fo llowing t he steps a s below . Setup: Remove: 1 2.
1 0 Unit standing without base is available. (Caution: must put unit in flat surf ace. Any uneven or sloped surfa ce may result unit damaged or injur y to user .
Adjusti ng Viewing A ngle For optim al viewing it is reco mmended t o look at t he full face of the monitor , then adjust the monitor's angle to y our own prefer ence. Hold the st and so you will not t opple the monitor w hen you change t he mon itor's ang le.
1 2 Connecti ng the Monit or 1. Pow e r 2. 5. H D M I 3. T o protect eq uipment, alw ays t urn off the PC an d LCD monit or before c onnecting. 1 Connect th e power ca ble to the AC port on the bac k of the m onitor .
1 3 Connecti ng the Monit or 1. Pow e r 2. DVI 3. T o protect eq uipment, alw ays t urn off the PC an d LCD monit or before c onnecting. 1 Connect th e power ca ble to the AC port on the bac k of the m onitor .
Adjust ing Setting Optimal Resolution Windo ws V ista For Windo ws Vist a: 1 Click S T A R T. 2 Click CONTROL P ANEL. 3 Click A ppearance an d Personalizat ion.
5 Click Dis play Settings. 6 Set the re solution SLIDE - BAR to . 1 Optimal preset resolution . 5.
Windows XP For Windo ws XP: 1 Click S T A R T. 2 Click SETTING S. 3 Click CONTROL P ANEL. 4 Click A ppearance an d Themes. 5 Double c lick DISPLA Y . 1 6.
6 Click SETTING S. 7 Set the re solution SLIDE - BAR to Windo ws ME/20 00 For Windows ME/20 00: 1 Click S T A R T. 2 Click SETTING S. 3 Click CONTROL P ANEL.
Hotke ys 1 2 3 Menu/Enter 4 5 Pow er Press the P ower bu tton to turn o n/ off th e monitor . 1 1 2 3 4 5 4:3 or wide / ∧ ∨ Source/Auto/Exit Power ∨ Ec o (DCR) / Eco (DCR) Press the Eco key continuously to select the Eco m ode of brightness an d DCR on when there is no OSD.
OSD Se tting Basic and si mple inst ruction on the con trol key s. 1) Press the MENU - button to act ivate the OSD w indow . 2) Press or to nav igate thr ough the f unctions. O nce the desired f unction is highlight ed, pres s the MENU - button to activ ate it .
L uminance 1. Press MENU (M enu) to displ ay menu. 2. Press or to select ( Luminanc e ), and pres s MENU to enter . 3. Press or to select subm enu , and press MENU to enter .
4. Press or to adjust . 5. Press AU T O to ex it . Brightnes s 0- 100 Backlight A djustmen t Contrast 0- 100 Contrast from Dig ital - register. Eco mode Standard Standard M ode Te xt Te xt Mode Intern.
Image S etup 1. Press MENU (M enu) to displ ay menu. 2. Press or to select ( Image Setup ), an d press MENU to enter . 3. Press or to select subm enu , and press MENU to enter .
4. Press or to adjust . 5. Press AU TO to exit . Clo ck 0- 100 Adjust pi cture Clock to reduc e Vertical - L ine noise. Phase 0- 100 Adjust Picture P hase to redu ce Horiz ontal - Line n oise Sharpness 0- 100 Adjust pi cture sharpn ess H.Position 0- 100 Adjust the horiz ontal positi on of the p icture.
Color Setu p 1. Press MENU (M enu) to displ ay menu. 2. Press or to select ( Color Setup ), and press MENU to enter . 3. Press or to select subm enu , and press MENU to enter .
4. Press or to adjust . 5. Press AU T O to ex it . Color setup . W arm Recall W ar m Color T emperature f rom EEPRO M. Normal Recall Norm al Color T emperat ure from EEPR OM. Cool Recall Cool Color T emperatur e from EEPR OM. sRGB Recall SR GB Color T emperature f rom EEPRO M.
Picture Boos t 1. Press MENU (M enu) to displ ay menu. 2. Press or to select ( Picture Boost ), and pres s MENU to ente r . 3. Press or to select subm enu , and press MENU to enter .
4. Press or to adjust . 5. Press AU TO to exit . Frame Siz e 14 - 100 Adj ust Frame Size Brightnes s 0- 100 Adjust Fra me Bright ness Contrast 0- 100 Adjust Fra me Contra st H.
OSD Setup 1. Press MENU (M enu) to displ ay menu. 2. Press or to select ( OSD Setup ), and pr ess MENU to enter . 3. Press or to select subm enu , and pr ess MENU to enter .
4. Press or to adjust . 5. Press AU T O to exit . H.Position 0- 100 Adjust the horizontal position o f OSD V.Position 0- 100 Adjust the v ertical p osition of OSD Timeout 5- 120 Adjust the OSD T imeou.
Extra 1. Press MENU (Menu) t o displ ay menu. 2. Press or to select ( Ext r a ), and press MENU to enter . 3. Press or to select subm enu , and pr ess MENU to enter .
4. Press or to adjust . 5. Press AU T O to exit . I2367F H /I2267F WH I2367F/I2267F W /I2067F 31 ∧ ∨ Input Select Auto Select to Auto De tect input signal Select Signal Source as Input Select .
3 2 Exit 1. Press MENU (M enu) to displ ay menu. 2. Press or to select ( E xi t ), and press MENU to enter . 3. Press AU T O to exit . E xit Exit the main OSD ∧ ∨.
3 3 LED Indicator Status LED Color Full Pow er Mode Blue Act ive - off M ode orange.
3 4 Driver Monitor Dri ver Windows 7 1. Start Window s® 7 2. Cli ck on the 'Sta rt' butt on and then click o n 'Control P anel'. 3.
3 5 4.Ckick on the “ Change display settings ” button. 5. Click t he “ Adv anced Settin gs” butt on. 6. Click the “Monitor” tab and then c lick the “Proper ties” button.
3 6 7. Click t he “Driver” tab. 8. Open the "Update Dr iver Sof tware - Gener ic PnP M onitor" w indow by clicking on “Update Driver ... “ and then click t he "Br owse my computer for driver so ftware" butto n. 9. Sel ect "Let me pick fro m a list of device dr ivers on my computer " .
3 7 10. Click t he “Have Di sk” butt on. Click on t he “Browse” button and nav igate t o the follow ing dir ectory: X: Dr iver module name (where X is the drive l etter de signator for the CD - ROM drive). 11. Select the " xxx .inf" fil e and cli ck the “Open ” button.
3 8 Windows Vista 1. Click "S tart " and "C ontro l Panel". Then, double - cl ick on "A ppearance an d Persona lizatio n". 2. Click "Persona lization" and t hen "Display Sett ings". 3. Click "A dvanced Se ttings.
39 4. Click "Pro perties" in the "M onitor" tab. If t he "Proper ties" bu tton is deactiv ated, it means the conf iguration for your monitor i s completed. T he monitor can be used a s is. If the me ssage " W indow s needs.
40 Windows XP 1. Start W indow s® X P 2. Click on t he 'Start' button and then cl ick on 'C ontrol Pan el'. 3. Select and click on the category ‘Appearance and Themes’ 4.
4 1 5. Select t he 'Setting s' tab the n click on the 'Advan ced' butto n. 6. Select ' Monitor ' tab - If the 'Propert ies' button is inactiv e, it means your monitor i s properly confi gured. Please stop in stallation.
4 2 8. Select t he 'Insta ll from a li st or speci fic locati on [advanc ed]' radio button a nd then cl ick on the ' Next' button. 9. Select t he 'Don't S earch. I w ill cho ose the driv er to instal l' radio button.
4 3 Windo ws 2000 1. Start Windows® 2000 2. Click on t he 'Start' button, p oint to 'Sett ings', and then clic k on 'Contr ol Panel' . 3. Double cl ick on the 'D isplay ' Icon. 4. Select the 'Settings' tab then click on 'A dvanced.
4 4 i-Menu Welco me t o “i - Menu” softw are by AOC. i - M enu makes it ea sy to adjus t your moni tor display setting by using o n screen menu s instead of the O SD button on t he mon itor . T o complet e instal lation, plea se follow the install ation guide.
4 5 e- Sa ve r W elcom e to us e A OC e - Saver monitor power mana gement s oftware ! The AOC e - Saver featur es Smart S hutdown functions for your mon itors, all ows y our monitor to ti mely shutdow.
4 6 Screen+ Welcom e to "Scr een+" softw are by AOC, Scree n+ softw are is a de sktop scre en splittin g tool , it splits t he desktop into dif ferent pa nes, ea ch pane di splays a dif ferent window . Y ou only need to drag t he window to a corres ponding pane, when y ou w ant to access it.
4 7 T r oubl eshoot Problem & Question Possible Sol utions Power LE D Is Not ON Make sure th e power button is ON and the P ower C ord is proper ly conne cted to a groun ded pow er outlet and to t he moni tor . No images on the scr een Is the pow er cord conne cted p roperly? Check the power cord connect ion and pow er supply .
Specification General Specification Panel Model name I 23 6 7 F H Driving system TFT Color LCD Viewable Image Size 584.2mm Diagonal Pixel pitch 0. 0884*RGB ( H )mm x 0.265 2 (V)mm Video R, G, B Analog lnterface ,HDMI Separate Sync. H/V TTL Display Color 16.
51 Operating 0° to 40° Non-Operating -25°to 55° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 93% (non-condensing) A ltitude: Operating 0~ 2000m (0~ 6562 ft ) Non-Operating 0.
5 2 Panel Model number I 2 267F WH Driving system TFT Color LCD Viewable Image Size 546 . 2 m m di agoanl Pixel pitch 0. 08265*RGB (H)mm x 0.24 795 (V)mm Video R, G, B Analog lnterface , HDMI Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 1 48.
Panel Model number I 2 3 67F Driving system TFT Color LCD Viewable Image Size 5 8 4 . 2 m m di agoanl Pixel pitch 0. 08 84 *RGB (H)mm x 0.2 652 (V)mm Video R, G, B Analog lnterface , DVI Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 1 48.
3 1 Panel Model number I 2 2 67F w Driving system TFT Color LCD Viewable Image Size 54 6 . 2 m m di agoanl Pixel pitch 0. 08 265 *RGB (H)mm x 0.2 4795 (V)mm Video R, G, B Analog lnterface , DVI Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 1 48.
Panel Model number I 2 0 67F Driving system TFT Color LCD Viewable Image Size 5 0 8 .05 m m di agoanl Pixel pitch 0. 0 9225 *RGB (H)mm x 0.2 7675 (V)mm Video R, G, B Analog lnterface , DVI Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 1 4 0 M Hz Resolution Horizontal scan range 30 kHz - 83 kHz Horizontal scan Size(Maximum) 442.
Preset Display Modes ST AND Resolution HORIZONT AL FREQUENCY(kHz) V ERTICAL FREQUENCY(Hz) VGA 640x480@60Hz 31.469 59.940 640x480@72Hz 37.861 72.809 640x480@75Hz 37.500 75.00 SVGA 800x600@56Hz 35.156 56.250 800x600@60Hz 37.879 60.317 800x600@72Hz 48.077 72.
I 2 067F ST AND Resolution HORIZONT AL FREQUENCY(kHZ) V ERTICAL FREQUENCY(Hz) VGA 640x480@60Hz 31.469 59.940 640x480@72Hz 37.861 72.809 640x480@75Hz 37.500 75.00 SVGA 800x600@56Hz 35.156 56.250 800x600@60Hz 37.879 60.317 800x600@72Hz 48.077 72.188 800x600@75Hz 46.
5 Pin Assignments Pin Number 15-Pin Side of the Signal Cabl e 1 Video-Red 2 Video-Green 3 Video-Blue 4 N.C. 5 Detect Cable 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 Ground 11 N.C. 12 DDC-Serial data 13 H-sync 14 V- s y n c 15 DDC-Serial clock Pin No. Signal Name Pin No.
5 Pin Number 24 -Pin Color Display Signal Cable Pin Number 24 -Pin Color Display Signal Cable 1 TMDS data 2 － 13 TMDS data 3 ＋ 2 TMDS data 2 ＋ 14 ＋ 5V Power 3 TMDS data 2/4 Shield 15 Ground (f.
5 8 Regul atio n FCC Notic e FCC Class B Radio Frequ ency Interf erence Statemen t NOT E: This equipment ha s been tested an d found to comp ly w ith the limits for a Cl ass B digital dev ice, pursu ant to Part 15 of th e FCC Rul es.
5 9 WEEE Declarati on Disposal of Waste Equi pment by Users in Priv ate Hou sehold in th e European U nion. This symb ol on the pro duct or on its pack aging indi cates that this product must not b e dispo sed of w ith your ot her household w aste.
WEEE /E-Waste declaration for India This symbol on the product or on its packaging indicates t hat this product must not be di sposed of with your other household waste.
61 Servic e W arrant y Statement for E uro pe LI MITED THR EE - YEAR WARRANTY* AOC Color Monitors sold withi n Europe AOC Internat ional (Eur ope) BV w arrants thi s product to be free from def ects in mater ial and w orkmanship f or a period of Three ( 3) years a fter the or iginal date of con sumer purch ase.
62 modified or altered; y ou bear the sole r esponsibi lity and l iability for any such modifica tion or alteration. ALL EXPRESS AND IMPLIED W ARRANTIES FOR T HIS PRODUCT (INCLUDIN G T HE WARRANTIES O.
63 W arranty Statement for North & South A merica (ex cluding Brazil) WARRANT Y ST A TEMENT for AOC Color M onitors Including th ose Sold within No rth America as Spe cified Envision Per ipherals, Inc.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDIN G THE WARRANTIES OF MERCHANT ABIL ITY A ND FITNESS F OR A P ARTICULAR PURPOSE) ARE LIMITED IN DURA TION TO A PERIOD OF T HREE (3) Y EAR S FOR P ART S AND LABOR AND ONE (1) YEAR FOR CRT TUBE OR LCD P ANEL FROM THE ORIGINAL DA TE OF CONSU MER PURCHASE.
６ WARRANTY PERIOD COVERAGE AT NO CHARGE CUSTOMER CHARGES Within the first three months of purchase: Covered by EASE - New AOC monitor - Call tag dispatched and return freight charges via UPS - None*.
TCO Certified Document for Displays versi o n . 2 . 3 Congratulations! This product is designed for both you and the planet! TCO Development works for sustainable IT - manufacture, use and recycling of IT products reflecting environmental, social and economic responsibility.
An important point after buying a device AOC I2267FWH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AOC I2267FWH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AOC I2267FWH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AOC I2267FWH you will learn all the available features of the product, as well as information on its operation. The information that you get AOC I2267FWH will certainly help you make a decision on the purchase.
If you already are a holder of AOC I2267FWH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AOC I2267FWH.
However, one of the most important roles played by the user manual is to help in solving problems with AOC I2267FWH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AOC I2267FWH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
